• 제목/요약/키워드: Secondary position

검색결과 378건 처리시간 0.027초

Force Assessment of Thermoformed and Direct-printed Aligners in a Lingual Bodily Movement of a Central Incisor Over Time: A 14-day In Vitro Study

  • Mary Linda Remley;Gabriel Ferreira Pessoa Carvalho Miranda ;Brent Bankhead;Julie McCray;Ki Beom Kim
    • Journal of Korean Dental Science
    • /
    • 제16권1호
    • /
    • pp.23-34
    • /
    • 2023
  • Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

Dynamic mechanism of rock mass sliding and identification of key blocks in multi-fracture rock mass

  • Jinhai Zhao;Qi Liu;Changbao Jiang;Zhang Shupeng;Zhu Weilong;Ma Hailong
    • Geomechanics and Engineering
    • /
    • 제32권4호
    • /
    • pp.375-385
    • /
    • 2023
  • There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

Web3 Business Model Innovation Approach and Cases of Korean Game Giants

  • Song, Minzheong
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제16권1호
    • /
    • pp.241-252
    • /
    • 2024
  • We analyze the types of Web3 business model innovation (BMI) of the six major Korean game companies by market size. As a result of the analysis, Nexon is watched as the adapter. It introduces blockchain (BC) layer 2, 'Polygon' to the extended ecosystem such as the creator's secondary creation, item utility, and compensation experience using the existing core intellectual property (IP). KakaoGames and Neowiz are watched as the adventurers. KakaoGames introduces BC layer 2, 'Polygon' and 'Near Protocol' to various experiments using tokenomics models in casual games and massively multiplayer online role-playing games (MMORPGs) using several existing popular IPs. Neowiz also introduces BC layer 2, 'Polygon' and 'Avalanche' to the IntellaX platform using existing game IPs. As the reinventor, Netmable positions as a game publisher that releases third-party games based on multi-chain infrastructure such as Klaytn, BNB Chain, Near Protocol, Aptos Foundation, and introduces BC to new core IPs. Finally, there are Wemade and Com2us as the mavericks. They aim to be the Web3 platform operators that create a BC layer 1 ecosystem and provide services that encompass BC games, GameFi, and non-fungible tokens (NFTs). Here are the implications of the four types of BMI. In terms of infrastructure, Nexon, KakaoGames, and Neowiz try to introduce a part of cross-chain, whereas Netmable tries to move toward a complete multi-chain strategy, and Wemade and Com2us also try to consider multi-chain, even if they have the full BC introduction. In terms of defending against market decline, Nexon and Netmable have a different position. Nexon which has a greater market dominance, only tries to continuously experiment, but Netmable is aggressively focusing on monetizing new products. Attacks on growth aspirations also show two different positions. KakaoGames and Neowiz only try to aggressively explore, while WeMade and Com2us try to set new standards for industrial innovation.

주택의 조명과 거주자의 면경착용 실태조사연구 (A Study on the Illumination of Household and Research on the Actual Conditions of Wearing Spectacles in Dwellers)

  • 석호작;남철현
    • 한국환경보건학회지
    • /
    • 제17권2호
    • /
    • pp.54-66
    • /
    • 1991
  • As a result of measuring illumination and making up a question at home visit directly by investigator who trained over twenty days period from October 4 to 24, 1990, in order to render help which illumination problem against house, society against eyes or framing of health instruction potgram by seizing natural lighting actual conditions of house and actual conditions of wearing spectacles and by investigating interrelationship, I can summarize as follows. 1) In property of investigation subject, woman 66.9%, In an age, the twenties was largest of 27.4%, the forties was 20.2%, the fifties was 18.6%, the thirties was 17.4%. In academic career, those of upper secondary school grauates was largest of 28.6%, those who possess university career was 25.9%, those who middle school career was 20.9%, decoding of Korean alphabet was 2%. 2) By a residence area, a big city was 43.3%, farming and fishing villages were 20.3%, the rest was a small town and the administrative office of town, township. In positon of house, the middle area was 43.6%, resident of suburb area was 38.0%. In form of house, a Korean-style house was 40.8%, a western-style house was 34.8%, an apartment house was 11.0%. In the a standard of living, the middle classes 77.2%, the lower classes were 15.3%. In residential house unit of area, from 21 to 30 unit of area was largest of 31.5%, from 10 to 20 unit of area was 19.9%, from 31 to 40 was 18.7%. 3) The wearing spectacles rate of study user was 44.1%. By the area, those who wearing spectacles was more than a half of 50.8% in the resident of big city area. As passing from the farm area to the city, that is being resident of big city was high wearing spectacles rate. In position of house, as being residence in central street showed high wearing spectacles rate. (central street was 51.5%, the middle area was 44.5% and the suburb area was 40.1%.) It seemed similarity difference a variable by position of house from wearing spectacles in standard of 1%. By form of house, wearing spectacles rate those who resident in apartment house was 49.5%, that rate those who resident in a western-style house was high of 49.0%, that rate those who resident in a Korean-style house was the lowest 39.0%. By social position of resident in room, in students case who study showed very high, as university students were very high of 62.3% idn wearing spectacles rate, middle and high school students 'were 50.0%, members of society were 47.6%, workers 20.3%. It seemed similarity difference from academic career in standard of 1%. By an age, the thirties was high of 54.1% in wearing spectacles rate, the twenties was 43.2%, the teenage was the lowest of 11.8%. 4) In illumination of study, over 200Lux was high of 40.1%. but below 99Lux which inappropriate illumination to see the books was 32.4%. Average by area, below 99Lux was 22.7% and over 400Lux was 50.0% in case of wooden floor. As examine by area, below 99Lux was high of 27.0% a case of wooden floor in the big city area, it was not good in illumination passing from the farm area(15.0%) to the city(19.0%). Average illlumination by area of the main living room below 99Lux was high of 37.5%, less than 200Lux was 58.5% of whole. In general, illumination of the main livingroom was inappropriate. By area, the big city was 32.5% below 99Lux, the middle and small city area were 33.8%, town and township area were 45.0%, farming and fishing area were 42.8%. By area, in the big city, illumination of study was 52.5% over 200Lux and 28.9% below 99Lux. In case of the middle and small city, study user of below 99Lux was 38.8% and over 200Lux was 46.9%. In case of the seat of town township, below 99Lux was 34.1% and over 200Lux was 39.7%. In case of farming and fishing area, illumination of study was 33.4% below 99Lux and 48.4% over 200Lux. It tends to high rate of inappropriate illumination. 5) By position of house, in case of wooden floor, less than 100Lux was 24.5% in central street. It was bad illumination than others position of house. In case of the main livingroom, less than 100Lux was 40.4% in the suburb area. It was bad iliumnation than others position of house. In case of study, less than 100Lux was 35.4% in the middle area, it was worse in illumination. In case of the main living room, is seemed similarity difference in standard of 1%. 6) By form of house, in case of wooden floor, illumination of less than 100Lux was 23.8% in a western-style house, it was bad illumination than others form of house. In case of the main livingroom, illumination of less than 100Lux was 47.4% in a Korean-style house, it was remarkably bad illumination than others form of house. In case of study, a Korean-style house was 38.8%, it was very bad illumination than others form of house. In case of the main livingroom and study, it seemed similatrity difference each as P < 0.01 and P < 0.05 in standard of 1%. 7) The wearing spectacles rate of those who use room of illumination over 400Lux was 40.7%, and that of those who use room of illumination less than 100Lux was 28.1%. It seemed similarity differecce in standard of 1%. 8) In period of wearing spectacles, 21.3% of total investigator-highest-was from before five years, 8.6% was from before three years. Among those who use of illumintion less than 99Lux, 34.0% began to wear spectacles from before two years 31.7% was from before five years, 30.3% was from before four years. It seemed similarity difference from period of wearing spectacles by illumination in standard of 1 %. 9) Among cause which sight grow worse, the first was that it was each 33.2% and 27.4% in response rate because watch TV nearly to wearing spectacles person and non-wearing person. The second was that a lot of seeing books was 25.3% in wearing spectacles person and response rate for dark illumination was 7.4% in nonwearing spectacles person. It seemed similarity difference in standard of 1%. (P < 0.01). 10) In experience which take medicine good for eyes, it was 50.1% in wearing spectacles person and 8.5% in non-wearing spectacles person. It seemed similarity difference in standard of 1%(P < 0.01). As we have seen above, inappropriate illumination can be a cause of wearing spectacles. Nevertheless, actually, is realities to indifferent against illumination of house. So it must learn knowledge about health obstacle of illumination through society instruction and school eduction against students as well as general residents. In case that natural lighting is inappropriate structural of house, we must be able to maintain appropriate illumination through artificial illumination. And so eyes which is core of human life have to be protected, related the authorities, related group, and all health medical personnel will organically cooperate with and make efforts.

  • PDF

10 MV 이상 고에너지 치료 시 발생되는 광중성자의 영향 (The Effect of Photoneutron Dose in High Energy Radiotherapy)

  • 박병석;안종호;권동열;서정민;송기원
    • 대한방사선치료학회지
    • /
    • 제25권1호
    • /
    • pp.9-14
    • /
    • 2013
  • 목 적: 10 MV 이상 고에너지 방사선 치료 시 광핵반응을 통해 광중성자가 발생된다. 광중성자는 방사선하중계수가 X선 보다 커 작은 선량에도 인체에 미치는 영향이 크므로 정확한 선량계산 및 고려가 필요하다. 이에 광자선 에너지 크기와 치료방법에 따른 광중성자의 선량변화를 공간적인 측면에서 비교 분석하였다. 대상 및 방법: 광자선의 에너지 크기에 따른 광중성자의 선량 변화를 측정하고자 동일한 치료부위의 환자를 대상으로 치료 계획을 10 MV와 15 MV conventional plan으로 각각 만들었다. 그리고 치료방법에 따른 차이에 대해 측정하고자 10 MV conventional plan과 10 MV IMRT plan을 각각 만들었다. 검출기의 위치는 광자선원으로부터 isocenter까지의 거리를 100 cm으로 정한 기준점을 $^3He$비례계수기의 중심점에 위치시키고 광중성자 선량을 측정하였다. 또한 중심점을 기준으로 couch의 longitudinal 방향으로 상방, 하방 50 cm 방향으로 각각 $^3He$비례계수기를 위치시켜 위치변화에 따른 선량변화를 측정하여 상용프로그램을 이용하여 분석하였다. 결 과: 에너지 크기에 따른 광중성자의 평균 누적선량은 10 MV, 15 MV conventional RT시 각각 $220.27{\mu}Sv$, $526.61{\mu}Sv$로 15 MV conventional RT가 평균 2.39배의 선량이 증가하였다. 동일한 에너지의 conventional RT와 IMRT의 광중성자의 평균 누적선량은 Conventional RT, IMRT 시 각각 $220.27{\mu}Sv$, $308.27{\mu}Sv$로 IMRT가 1.40배의 선량이 증가하였다. 측정위치에 따른 광중성자의 누적선량은 Conventional RT시 point 2가 3보다 10 MV에서는 약 7.1%, 15 MV에서는 3.0%로 유의하게 높게 측정되었다. 결 론: 고에너지 방사선 치료 시 광중성자에 의한 불필요한 선량을 줄이기 위해 에너지의 선택, 치료 방법의 결정 및 환자의 position을 고려해야 할 것이다. 또한 광중성자의 선량 데이터를 체계화하여 전산화계획 프로그램에 적용되는 방안을 모색하여야 할 것이다. 이는 환자에게 불필요한 선량을 최소화하고 방사선 치료로 인한 2차 암 발생확률과 부작용을 감소시킬 수 있을 것으로 사료된다.

  • PDF

목업 테스트를 통한 숏크리트용 섬유 그물망 일체형 터널 지보시스템의 현장 적용성 평가 (Evaluation of Field Applicability of Shotcrete for Fiber-net Integrated Tunnel Support System through Mock-up Test)

  • 김지영;최성철
    • 한국건설순환자원학회논문집
    • /
    • 제8권1호
    • /
    • pp.72-78
    • /
    • 2020
  • 본 연구에서는 그물망 형태의 터널 지보용 섬유 및 섬유 그물망 지보재용 숏크리트를 포함하는 터널 지보용 섬유 그물망 지보재와 지보재간의 일체화 기술로 구성된 숏크리트용 섬유 그물망 일체형 터널 지보시스템을 개발하였다. 또한, 개발된 터널 지보시스템의 현장 적용성을 평가하고 강섬유 보강 숏크리트의 성능과 비교하기 위하여, 터널 모사 구조물을 대상으로 부재 실험(mock-up test)이 수행되었다. 그 결과, 굵은 골재가 포함된 숏크리트(S20A5RP10-C)의 경우 섬유 그물망과의 부착성능 저하로 인해 2차 숏크리트가 시공 도중 탈락됨으로써 과도한 리바운드율이 발생되었으며, 강섬유 보강 숏크리트의 경우 강섬유의 뭉침 현상 및 압송성 저하로 인해 숏크리트의 타설량이 목표치에 미치지 못하였다. 한편, 본 연구를 통해 개발된 모르타르 숏크리트(S20A5RP10-M)의 타설량 및 섬유 그물망의 설치 위치가 목표치에 거의 근접하였으며, 강섬유 보강 숏크리트에 비해 낮은 리바운드율이 발생하였다.

Intercalant 함량 변화에 따라 합성된 Li-AGICs의 화학적 분석에 관한 연구 (A Study on the chemical analysis of synthesized Li-AGICs with changes of intercalant contents)

  • 오원춘;심상균
    • 분석과학
    • /
    • 제10권3호
    • /
    • pp.209-215
    • /
    • 1997
  • 2차 전지의 양극(anode)으로 사용되는 Li-AGICs를 혼합가압법에 의하여 Li의 함유량에 따라 합성하였다. 이들 합성된 화합물을 X-선회절법, UV/VIS 분광학적 분석법 및 DSC 열분석법을 이용하여 특성화하였다. X-선회절분석 결과에 의하면 리튬의 함유량이 증가함에 따라 낮은 stage가 관찰되었으나, 각각의 화합물들은 혼재된 stage를 가지고 있음이 나타났다. $Li_{30wt%}$-AGIC의 경우 지배적으로 1 stage의 구조가 나타났지만 순수한 1 stage의 화합물은 얻을 수가 없었는데, 이것은 인조 흑연의 구조적 특성 때문에 예상할 수 있다. UV/VIS 분광학적 특성에 의하면 Li-AGIC의 흡수 spectra가 활성적으로 나타나지는 않았지만, $Li_{30wt%}$-AGIC의 경우 뚜렷한 $R(%)_{min}$의 형성과 함께 특징적인 흡수영역을 나타내고 있다. DSC에 의한 열역학적 결과로부터 화합물에 대하여 엔탈피의 변화량(${\Delta}H$)과 엔트로피의 변화량(${\Delta}S$)을 구하였다. 이들로부터 Li-AGIC의 발열반응과 흡열반응의 결과들은 인조 흑연 사이에 존재하던 리튬이 열에 의해 deintercalation이 일어날 때의 열적 안정성과 관련이 있음을 알 수 있다. 또한 열적 변이가 일어나는 동안 $Li_{30wt%}$-AGIC의 구조 변화에 대하여 토론하였다.

  • PDF

구순구개열을 동반한 부정교합의 비외과적 교정치료 (Non-surgical orthodontic treatment of malocclusion with cleft lip and palate)

  • 이승호;전영미;김정기
    • 대한구순구개열학회지
    • /
    • 제2권1_2호
    • /
    • pp.29-41
    • /
    • 1999
  • 구순구개열은 악안면의 선천기형중 발생빈도가 가장 높은 것으로 알려져 있으며,출생시부터 성장이 완료되는 시기까지 일관된 치료계획에 의한 종합적인 진료체계가 필수적이다. 구순구개열이 존재할 경우 구개부의 조기 봉합후의 반흔조직 형성으로 인한 치열궁의 협착 또는 중안모의 함몰 경향과 함께 상악 측절치의 선천적 결손 또는 기형치, 전치의 회전과 경사 등이 수반되므로 교정치료에 의한 기능적, 심미적인 치열의 회복이 필요하게 된다. 구순구개열 환자의 교정치료에 있어서 상악치열의 정상적인 배열과 구치부 반대교합의 치료를 위해 상악골 확대가 종종 필요하며, 이를 위하여 Hyrax appliance, Quad-helix 및 Fan-type expansion screw, Jointed fan type expander 등 다양한 장치가 활용될 수 있다. 심하지 않은 구순구개열 환자의 교정치료에서 상악골 확대를 위한 장치의 선택은 환자의 치열궁 형태, 연령, 구치부와 전치부의 치열궁 폭경 등 다양한 요인이 고려되어야 하며, 치료 후 악궁형태의 보정에 특별한 주의를 기울여야 할 것이다.

  • PDF

상악골 수평골절단술 후 비외형 변화에 관한 임상적 연구 (A CLINICAL STUDY OF THE NASAL MORPHOLOGIC CHANGES FOLLOWING LEFORT I OSTEOTOMY)

  • 배준수;유준영;류정호;김용관
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제25권4호
    • /
    • pp.324-329
    • /
    • 1999
  • The facial esthetics are much affected by nasal changes due to especially its central position in relation to facial outline and so appropriately evaluated should be the functional and esthetic aspects of the nose associated with the facial appearance. Generally, a maxillary surgical movement is known to induce the changes of nasolabial morphology secondary to the skeletal repositioning accompanied by muscular retraction. These changes can be desirable or undesirable to individuals according to the direction and amount of maxillary repositioning. We investigated the surgical changes of bony maxilla and its effects to nasal morphology through the analysis of the lateral cephalogram in the Le Fort I osteotomy. Subjects were 10 patients(male 2, female 8, mean age 22.3 years) and cephalograms were obtained 2 weeks before surgery(T1) and 6 months after surgery(T2). The surgical maxillary movement was identified through the horizontal and vertical repositioning of point A. Soft-tissue analysis of the nasal profile was performed employing two angles: nasal tip projection(NTP), columellar angle(CA). Also, alar base width(ABW) was assessed directly on the patients with a slide gauge. The results were as follows; 1. Both anterior and superior movement above 2mm of maxilla rotated up nasal tip above 1mm. Either anterior or superior movement above 2mm of maxilla made prediction of the amount & direction of NTP changes difficult. Especially, a correlation between horizontal movement of maxilla and NTP rotated-up was P<0.01. 2. Both much highly anterior and superior movement of maxilla is accompanied by more CA increase than either highly. Especially, the correlation between horizontal movement of maxilla and CA change was P<0.05. 3. Anterior and/or superior movement of maxilla was accompanied by the unpredictable ABW widening. 4. The amount of changes of NTP, CA, and ABW is not in direct proportion to amout of anterior and/or superior movement of maxilla. 5. Nasal morphologic changes following Le Fort I osteotomy are affacted by not merely bony repositioning but other multiple factors.

  • PDF

치과용 아말감합금 및 아말감의 마세구조에 관한 연구 (A STUDY ON THE MICROSTRUCTURES OF THE AMALGAM ALLOYS AND AMALGAMS)

  • 연상흠;이정식;이명종;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제21권1호
    • /
    • pp.87-105
    • /
    • 1996
  • The purpose of this study is to investigate the characteristics of the compositions and phases of amalgam alloys and amalgams by using EMPA and X-ray diffractometer. Each specimen was made from Caulk Fine Cut Clow copper lathe cut amalgam), Caulk Spherical (low copper spherical amalgam), Tytin (high copper unicorn position amalgam), Dispersally (high copper admixed amalgam) and Valiant (Palladium enriched amalgam). For preparing amalgam alloys, Tytin and Valiant were used as powder forms and the others were used as tablet forms after being polished with polishing machine. For preparing amalgams, each amalgam alloy and Hg were measured, and triturated by mechanical amalgamater according to user's instructions. After triturating, the triturated mass was inserted to cylindrical metal mold and simultaneously adapted by cylindrical condenser with same diameter and condensed by Instron universal testing machine with 80kg pressure & 1mm/min speed. Each specimen was removed from the metal mold and stored at room temperature for a week. The specimen was polished with the same polishing machine for amalgam alloy. For observation of microstructure and analysis of composition of amalgam alloys and amalgams, EMPA was used to get secondary electron images, backscattered images and characteristic X-ray images of Ag, Sn, Cu, Zn, Hg. To analyze compositions of amalgam alloys and amalgams, X-ray diffractometer was used. Amalgam alloys were scanned at the range of 2${\theta}$ of 30-$85^{\circ}$ and the speed of $4^{\circ}$/min with Cuka line and amalgams were scanned at the range of 2${\theta}$ of 28-$44^{\circ}$ and the speed of $4^{\circ}$/min with Cuka line. By comparing obtained d(distance between surfaces) and d of expected phases and atoms in amalgam alloys and amalgams in ASTM card, phases and atoms were identified. The results were as follows, 1. In Caulk Fine Cut amalgam alloy typical ${\gamma}$ phase was shown, and in amalgam, ${\gamma}$, ${\gamma}_1$ and ${\gamma}_2$ phases were observed. 2. In Caulk Spherical amalgam alloy ${\gamma}$, Ag, Cu and $\varepsilon$ phases were shown, and in amalgam ${\gamma}$, ${\gamma}_1$, ${\gamma}_2$ and $\eta$ phases were observed. 3. In Tytin amalgam alloy ${\gamma}$, Cu and $\varepsilon$ phases were shown, and in amalgam ${\gamma}$, ${\gamma}_1$, $\eta$ and $\varepsilon$ phases were observed. 4. In Dispersalloy ${\gamma}$, Ag, Cu and $\varepsilon$ phases were shown, and in amalgam ${\gamma}$, ${\gamma}_1$, $\eta$ and $\varepsilon$ phases were observed. 5. In Valiant alloy ${\gamma}$, Cu and e phases were shown, and in amalgam ${\gamma}$, ${\gamma}_1$, $\eta$ and $\varepsilon$ phases were observed.

  • PDF