• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2284-2291
• /
• 2006

The present study investigates gas residence time and mixing characteristics for various swirl numbers generated by injection of secondary air into a lab-scale cylindrical combustor. Fine dust particles and butane gas were injected into the test chamber to study the gas residence time and mixing characteristics, respectively. The mixing characteristics were evaluated by standard deviation value of trace gas concentration at different measurement points. The measurement points were located 25 mm above the secondary air injection position. The trace gas concentration was detected by a gas analyzer. The gas residence time was estimated by measuring the temporal pressure difference across a filter media where the particles were captured. The swirl number of 20 for secondary air injection angle of 5$^{\circ}$ gave the best condition: long gas residence time and good mixing performance. Numerical calculations were also carried out to study the physical meanings of the experimental results, which showed good agreement with numerical results.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1092-1100
• /
• 2005

In the present study, characteristics of steady state laminar flows of a straight duct connected to a 180$^{o}$ curved duct were examined in the entrance region through experimental and numerical analyses. For the analysis, the governing equations of laminar flows in the Cartesian coordinate system were applied. Flow characteristics such as velocity profiles and secondary flows were investigated numerically and experimentally in a square cross-sectional straight duct by the PIV system and a CFD code(STAR CD). For the PIV measurement, smoke particles produced from mosquito coils. The experimental data were obtained at 9 points dividing the test sections by 400 3m. Experimental and numerical results can be summarized as follows. 1) Reynolds number, Re was increased, dimensionless velocity profiles at the outer wall were increased due to the effect of the centrifugal force and secondary flows. 2) The intensity of a secondary flow became stronger at the inner wall rather than the outer wall regardless of Reynolds number. Especially, fluid dynamic phenomenon called conner impact were observed at dimensionless axial position, x/D$_{h}$=50.

• 대한화학회지
• /
• 제48권4호
• /
• pp.399-413
• /
• 2004

이 연구에서는 용해와 관련된 현상에 대해서 초등학교 학생에서부터 대학생에 이르기까지 학교급에 따라 학생들이 가지는 개념유형을 알아보고, 초${\cdot}$중등학교 교사들의 용해 현상에 대한 지도 실태를 알아보았다. 연구 결과, 초등학생 때 형성된 구멍 개념에 의한 용해 현상의 이해가 고등학생 때까지 유지되고 있었으며, 인력 개념에 의해 용해 현상을 학습하는 시기인 고등학교 2, 3학년과 대학생들은 인력 개념으로 용해 현상을 이해하는 비율이 상대적으로 높게 나타났다. 그러나 용해 현상을 설명할 때는 초등학생에서부터 대학생에 이르기까지 많은 학생들이 인력 개념보다는 구멍 개념을 선호하는 것으로 나타났고, 개념의 이해와 설명에 커다란 차이를 나타냄으로써 학생들의 용해 현상에 대한 이해 정도가 전반적으로 낮음을 알 수 있었다. 교사들의 설문 응답 분석 결과, 초등학교 교사의 90% 정도가 소금이 물에 녹는 현상을 콩 사이로 좁쌀이 들어가는 것과 같은 현상으로 이해하고 있었으며, 실제 학생들에게 소금이 물에 녹는 현상을 콩 사이로 좁쌀이 들어가는 모형을 이용하여 지도한다고 응답하였다. 중등학교 교사들 역시 약 절반 정도는 용해 현상을 구멍 개념으로 이해하고 있었으며, 인력 개념으로 바르게 이해하고 있는 교사는 20% 정도에 지나지 않았다. 또한, 인력 개념으로 이해하고 있는 교사들도 실제 학생들을 지도할 때는 구멍 개념으로 설명하는 경우가 많아 교사들의 개념 이해와 지도에는 차이가 있음을 알 수 있었다.

• 대기
• /
• 제27권1호
• /
• pp.29-40
• /
• 2017

The $PM_{10}$ and $PM_{2.5}$ particles over the Yellow Sea of Korea were collected by ship-borne observation during two cruises in spring, 2015. Their water-soluble ionic components such as $NH_4^+$, $Na^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $SO_4^{2-}$, $NO_3^-$, $Cl^-$, $F^-$, $CH_3COO^-$, $HCOO^-$, and $CH_3SO_3^-$ were analyzed, in order to examine the pollution characteristics of the secondary aerosol components. The comparative study of particle size distribution has resulted that $NH_4^+$, $nss-SO_4^{2-}$, $nss-Mg2+$, $nss-K^+$, $HCOO^-$, and $CH_3SO_3^-$ species mostly existed in fine particle mode. Meanwhile, nss-F-and sea-salt species were distributed in both fine and coarse particle mode, $NO_3^-$, $nss-Ca^{2+}$, $CH_3COO^-$ species were rich in coarse particle mode. The concentrations of secondary pollutants($nss-SO_4^{2-}$, $NO_3^-$, $NH_4^+$) increased in fine particles, and those of natural components ($nss-Ca^{2+}$, Sea-salt) increased in coarse particles. $NH_4^+$ exists as the form of $(NH_4)_2SO_4$ and $NH_4NO_3$, and mostly as $(NH_4)_2SO_4$ in fine particles. $NH_4NO_3$ has lower content compared to $(NH_4)_2SO_4$, and it mostly existed in fine particles at Yellow Sea I and in coarse particles at Yellow Sea II. The concentration ratios of $NO_3^-/nss-SO_4^{2-}$ for Yellow Sea I and Yellow Sea II were 0.52 and 0.16 in coarse particles, and they were 0.64 and 0.38 in fine particles, respectively, showing that the stationary source emissions were more important than mobile source emissions in Yellow Sea II (except Passage II-4).

• 한국대기환경학회지
• /
• 제34권3호
• /
• pp.418-429
• /
• 2018

Measurements of 24-hr size-segregated ambient particles were made at an urban site of Gwangju under high pressure conditions occurred in the Korean Peninsula late in March 2018. The aim of this study was to understand the effect of air stagnation on mass size distributions and formation pathways of water-soluble organic and inorganic components. During the study period, the $NO_3{^-}$, $SO_4{^{2-}}$, $NH_4{^+}$, water-soluble organic carbon (WSOC), and humic-like substances(HULIS) exhibited mostly bi-modal size distributions peaking at 1.0 and $6.2{\mu}m$, with predominant droplet modes. In particular, outstanding droplet mode size distributions were observed on March 25 when a severe haze occurred due to stable air conditions and long range transport of aerosol particles from northeastern regions of China. Air stagnation conditions and high relative humidity during the study period resulted in accumulation of primary aerosol particles from local emission sources and enhanced formation of secondary ionic and organic aerosols through aqueous-phase oxidations of $SO_2$, $NO_2$, $NH_3$, and volatile organic compounds, leading to their dominant droplet mode size distributions at particle size of $1.0{\mu}m$. From the size distribution of $K^+$ in accumulation mode, it can be inferred that in addition to the secondary organic aerosol formations, accumulation mode WSOC and HULIS could be partly attributed to biomass burning emissions.

• 대한기계학회논문집
• /
• 제5권3호
• /
• pp.159-169
• /
• 1981

The mixing length theory is extended to close the momentum queations for two-phase turbulent flow at a first-order closure level. It is assumed that the mass fraction of the particles is of the order of unity, that the particle size is so small that the particles are fully suspended is the primary fluid, and that the relaxation time scale of the particles is of the same order as the time scale of the energy containing eddies so that the suspended particles are responsive to the fluctuating turbulent field. The bulk motion of the particles is treated as a secondary fluid with its own coefficient of momentum transport. The proposed closure is uniformly destributed acress the pipe section. Predicted velocity profiles and the friction factors are in good agreement with avaiable experimental data.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.434-438
• /
• 2013

Monodispersed 3Y-$ZrO_2$ spherical agglomerates were synthesized by thermal hydrolysis process followed by crystallization processes (hydrothermal treatment and calcination). The crystallization process affected the properties of the final particles, such as the primary particle size, the agglomeration state, and the fraction of $ZrO_2$ monoclinic phase. The hydrothermal treated spherical particles were porous microstructures (weak agglomerates) composed of small primary particles with a size of 14 nm, but the calcined spherical particles had a dense microstructure due to the hard aggregation between primary particles. While the calcined particles had a low green density due to the hard aggregation, hydrothermal treated ones were soft agglomerates and had a deflection point at 50 MPa due to the rearrangement of secondary spherical particles and the filling of the interstices with the primary particles. Finally, the green density of hydrothermally treated $ZrO_2$ particles was 58% at 200 MPa.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.714-724
• /
• 1985

본 논문에서는 입자가 부상된 2상유동의 해석에서 여러유동조건의 유동을 공 통적으로 해석할 수 있고 또 유동의 난류구조를 규명할 수 있도록 하기 위해서 2-방정 식 난류모델을 적용하였고 또 지배방정식들 속에 나타나는 1유체와 2유체의 2차 상관 관계들을 모형화 할 때 Taweel and Landau의 스펙트럼 이론을 확장발전시켜 적용하였 다.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.793-796
• /
• 2004

Process Parameters were studied in synthesis of LiCoO$_2$ Powder by ultrasonic spray Pyrolysis. Concentration of the mixed solution influenced the size, shape, and yield of the synthesized powder. The yield was affected primarily by the height of the solution, and then by the flow rate of a carrier gas. The temperature of the reactor governed the crystallinity and morphology of the powder. LiCoO$_2$ powders were synthesized as a layered high temperature phase above 800$^{\circ}C$. The synthesized powders were sphere and secondary Particles consisted of primary particles of 55-70 nm. The secondary Particles became bigger from 0.28 to 1.43 $\mu\textrm{m}$ as the concentration of the solution was increased from 0.05 to 2.0 M. The 2.0 M solution provided the highest production rate.

• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.440-444
• /
• 2015

Effects of operating variables on the solid circulation rate were investigated in a three-phase circulating fluidized bed, of which inside diameter was 0.102m and height was 3.5m, respectively. Gas velocity, primary and secondary liquid velocities, particle size and height of solid particles piled up in the solid recycle device were chosen as operating variables. The solid circulation rate increased with increasing primary and secondary liquid velocities and height of solid particles piled up in the solid recycle device, but decreased with increasing particle size. The value of solid circulation rate decreased only slightly with increasing gas velocity in the riser. The values of solid circulation rate were well correlated in terms of dimensionless groups within the experimental conditions.