• Journal of The Korean Association For Science Education
• /
• v.9 no.1
• /
• pp.75-89
• /
• 1989

Secondary schools in Korea have been faced with several critical problems with regard to science education. Among them one of the most fundamental problems is associated with laboratory-based science education. There fore as a part of research project for the improvement of science education in secondary schools, this study had its abjectives to inquire into the following areas related to laboratory experiment. ${\circ}$Survey and analysis of theoretical backgrounds for science teaching focused on laboratory experiments. ${\circ}$Status survey of experiment-based science teaching in high schools. ${\circ}$Development of model for improving experiment-based science teaching. In order to fulfill these objectives this study used methods of eiterature review, survey, and interviews. The major finding are as follows : ${\circ}$Some topic for laboratory experiments as oppeared in the textbooks are not appropriate in the light of sience curricular operations in high schools. ${\circ}$In some schools equipments and facilities of school laboratories are for from sufficiency. ${\circ}$Laboratory experiments are not financially supportel for ideal science teach in both middle schools and high schools. These are not on exhaustive list of findings from this study More finding and teaching model for improvement of science education are also described in this paper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1058-1065
• /
• 2004

In the present study, characteristics of steady state laminar flows of a straight duct connected to a 180$^{\circ}$ curved duct were examined in the entrance region through experimental and numerical analyses. For the analysis, the governing equations of laminar flows in the Cartesian coordinate system were applied. Flow characteristics such as velocity profiles, and secondary flows were investigated numerically and experimentally in a square cross-sectional straight duct by the PIV system and a CFD code(STAR CD). For the PIV measurement, working fluid produced from mosquito coils smoke. The experimental data were obtained at 9 points dividing the test sections by 400 mm. Experimental and numerical results can be summarized as follows. Critical Reynolds number, Recr which indicates transition from laminar steady flow to transition steady flow was 2,150. As Reynolds number, Re, was increased, dimensionless velocity profiles at the outer wall were increased due to the effect of the centrifugal force and the secondary flows. The intensity of a secondary flow became stronger at the inner wall rather than the outer wall regardless of Reynolds number.

• Computers and Concrete
• /
• v.19 no.5
• /
• pp.545-553
• /
• 2017

In the authors' previous study, an axial force-flexural moment (P-M) interaction curve model was proposed to evaluate fire-resisting performances of reinforced concrete (RC) column members. The proposed method appeared to properly consider the axial and flexural strength degradations including the secondary moment effects in RC columns due to fire damage. However, the detailed P-M interaction curve model proposed in the authors' previous study requires somewhat complex computational procedures and iterative calculations, which makes it difficult to be used for practical design in its current form. Thus, the aim of this study was to develop a simplified P-M interaction curve model of RC columns exposed to fire considering the effects of fire damage on the material performances and magnitudes of secondary moments. The simplified P-M interaction model proposed in this study was verified using 66 column fire test results collected from literature, and the verification results showed that the proposed simplified method can provide an adequate analysis accuracy of the failure loads and fire-resisting times of the RC column specimens.

• Korean Journal of Adult Nursing
• /
• v.29 no.1
• /
• pp.32-40
• /
• 2017

Purpose: The purpose of this secondary data analysis was to identify factors influencing a relapse among patients with coronary artery disease (CAD). Methods: Of 250 participants enrolled in the original study 75 were selected as there was no relapse for more than one year following the initial treatment and 54 were selected because there was a relapse. Data were analyzed using ${\chi}^2$ test, t-test or F test to determine if there were any significant differences in the study variables relative to the status of relapse. Predictors were calculated by logistic regression. Results: Autonomy supported by healthcare providers was the significant predictor for relapse in patients with CAD. Patients with low autonomy supported by healthcare providers was 3.91 times more likely to relapse than patients with high autonomy supported. Patients with diabetes were at greater risk of recurrence. Conclusion: Secondary prevention of CAD is a major task for patients with CAD. Behavioral strategies for cardiovascular risk reduction are essential and autonomy supported by healthcare providers should be included in their strategies.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.481-487
• /
• 2010

The equivalent circuits intended to analyze the characteristics of IPT systems can be shown in structures similar to those of existing transformers. IPT systems are composed of combinations of the primary and secondary coils based on magnetic coupling, and the performances are determined by the lengths or the degrees of magnetic coupling of current collecting conductors(secondary) and feeding rails (primary) and system performances become the maximum when they are coupled under the optimum condition. To maximize the output currents of the secondary side, the shapes of iron cores and the structures of coils etc should be considered. To this end, three types of IPT system simulation models were selected and they were analyzed using an electromagnetic field analyzing program. To compare the types with each other, the sizes of the IPT systems and the primary side voltages etc were made to be the same. The electromagnetic fields were analyzed while changing the thicknesses of the cores and the lengths of the air gap etc and the results were analyzed in order to derive the optimum specifications.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.261-272
• /
• 2014

Home appliances go through a couple of packaging stages from the plant to consumers. The primary packaging, inner packaging for each part, happens for protection after products leave the plant. The secondary packaging happens in the unit of product, ensuring cushioning packaging to protect products from movement. The final tertiary packaging is for transportation and delivery. Each stage of product packaging, however, costs a lot of money because of disposable packaging materials used in each stage including vinyl, tapes, Styrofoam, and corrugated cardboards. Discarded packaging materials also cause environmental problems. In an effort to come up with a measure to solve those problems, this study proposed a plan to minimize logistics costs with semi-permanent packaging materials to replace disposable ones including Styrofoam, vinyl, and corrugated cardboards in the stages of inner packaging, cushioning packaging, product unit-based packaging, and transportation. The study also developed a model to cut down logistics costs by reducing various packaging stages including the primary, secondary, and tertiary stage only to the secondary one through module-type products instead of the transportation- and delivery-type ones, as well as demonstrated the excellence of the study through numerical analysis.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04b
• /
• pp.19-25
• /
• 2002

Biotechnology in the 21st century will be driven by three emerging technologies: genomics, high-throughput biology, and bioinformatics. These technologies are complementary to one another. A large number of economically important crops are currently subjected to whole genome sequencing. Functional genomics for determining the functions of the genes comprising the given plant genome is under progress by using various means including phenotyping data from transgenic mutants, gene expression profiling data from DNA microarrays, and metabolic profiling data from LC/mass analysis. The aim of plant molecular breeding is shifting from introducing agronomic traits such as herbicide and insect resistance to introducing quality traits such as healthful oils and proteins, which will lead to improved and nutritional food and feed products. Plant molecular breeding is also expected to aim to develop crops for producing human therapeutic and industrial proteins.

• Molecular & Cellular Toxicology
• /
• v.5 no.3
• /
• pp.265-271
• /
• 2009

Concentrations of industrial, agricultural and natural chemicals have been increasing in secondary effluents without their combined sub-lethal effects having been elucidated. In this study, two assays (the comet and acetylcholinesterase assays) were combined to evaluate the genotoxic and neurotoxic effects of effluent from the Noksan wastewater treatment plant (WWTP) on two local marine fish species (flounder and sea eel). The fish were exposed to WWTP secondary effluent that had been diluted with filtered seawater to final concentrations of 1%, 10% and 50%. Analysis of fish samples collected 3 and 5 days after exposure showed that DNA damage occurred in flounder exposed to 50% effluent and in sea eels exposed to 10% or 50% effluent. Furthermore, it was found that acetylcholinesterase (EC:3.1.1.7, AChE) activity decreased in both species when exposed to 10% effluent, indicating the presence of large amounts of genotoxic and neurotoxic chemicals in the effluent. Our results indicate that the comet and AChE assays are promising tools for biomonitoring of secondary effluents.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.21-34
• /
• 2016

In the present study, we applied various machine learning techniques comparatively for prediction of subsurface structures based on multiple secondary information (i.e., well-logging data). The machine learning techniques employed in this study are Naive Bayes classification (NB), artificial neural network (ANN), support vector machine (SVM) and logistic regression classification (LR). As an alternative model, conventional hidden Markov model (HMM) and modified hidden Markov model (mHMM) are used where additional information of transition probability between primary properties is incorporated in the predictions. In the comparisons, 16 boreholes consisted with four different materials are synthesized, which show directional non-stationarity in upward and downward directions. Futhermore, two types of the secondary information that is statistically related to each material are generated. From the comparative analysis with various case studies, the accuracies of the techniques become degenerated with inclusion of additive errors and small amount of the training data. For HMM predictions, the conventional HMM shows the similar accuracies with the models that does not relies on transition probability. However, the mHMM consistently shows the highest prediction accuracy among the test cases, which can be attributed to the consideration of geological nature in the training of the model.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1286-1291
• /
• 1992

We have experienced 456 cases of spontaneous pneumothorax from January, 1981 to December, 1991 at the department of Thoracic and Cardiovascular Surgery, Chonbuk National University Hospital. Of these, 102 cases were recurrent pneumothorax. These 102 cases were based on the retrospective clinical analysis, and the results were as follows: The ratio of male to female was 6.2: 1 in male predominance and the old aged patients, over 50 years old, occupied 46.8%a of all patients. Primary spontaneous pneumothorax was 43 cases[42.6%] and secondary spontaneous pneumothorax was 59 cases. The underlying pathology in secondary spontaneous pneumothorax was tuberculosis: 31 cases[30.4%], emphysema and chronic obstructive pulmonary disease: 27 cases[26.1%], Most frequent operative and pathologic findings in the primary and the secondary spontaneous pneumothorax was bullae and blebs at apex. The employed managements were only closed thoracostomy in 41 cases, open thoracot-omy in 61 cases. The operative procedures at thoracotomy were bullectomy or bullae ligation in 37 cases, bullae resection with wedge resection in 8 cases, bullae resection with segmentectomy in 6 cases, bullae resection with decortication in 3 cases, lobectomy in 5 cases, decortication in 2 cases. Complications were subcutaneous emphysema[5 cases], wound infection[1 case], and temporary pulmonary insufficiency[1 cases]