• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.767-771
• /
• 2008

Second-order rate constants have been measured spectrophotometrically for the Michael-type reaction of 1-(Xsubstituted phenyl)-2-propyn-1-ones (2a-f) with amines in $H_2O$ at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. A linear Brønsted-type plot is obtained with ${\beta}_{nuc}$ = 0.25 ${\pm}$ 0.02, a typical $\beta_{nuc}$ value for reactions which proceed through a stepwise mechanism with attack of amine on the electrophilic center being the rate-determining step. Secondary alicyclic amines are found to be more reactive than isobasic primary amines. The Hammett plot for the reactions of 2a-f with morpholine is not linear, i.e., the substrate with a strong electron-donating group (e.g., 4-MeO) exhibits a negative deviation from the Hammett plot. However, the Yukawa-Tsuno plot for the same reactions exhibits an excellent linear correlation with ρ = 0.62 and r = 0.82. Thus, it has been proposed that the nonlinear Hammett plot is not due to a change in the ra te-determining step but due to ground-state stabilization through resonance interactions.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.294-301
• /
• 1999

Geminal bisphosphonates have been well known to be effective inhibitors of various calciumrelated disorders such as Paget's disease, hypercalcemia of malignancy, and osteoporosis. To synthesize bisphosphonates, we have used the pentacovalent oxaphospholene prepared from methyl vinyl ketone and triethyl-phosphite. Υ-Ketobisphosphonates are obtained by bromination, applied Westheimer reaction, and hydrolysis of synthesized oxaphospholene. This compound was converted to the N-alkylated Υ-aminobisphosphonates by the reductive amination. Conversion of the resulting secondary amine to the tertiary one, followed by introduction of the second alkyl group on the nitrogen, was led to the synthesis of new N,N'-dialkylated Υ-aminobisphosphonates.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.234-238
• /
• 1996

Second-order rate constants have been measured spectrophotometrically for the reaction of p-nitrophenyl acetate (PNPA) with morpholine, piperazine and piperidine in MeCN-H2O mixtures of varying compositions. The rate of the present aminolysis decreases upon additions of MeCN into H2O up to near 30-40 mole % MeCN and remains nearly constant upon further additions of MeCN. The reaction of PNPA with anionic nucleophiles, such as HO-, p-chlorophenoxide and butane-2,3-dione monoximate, has also exhibited two distinguishable reactivity zones. However, the reactivity trend for the anionic nucleophiles is quite different from the one obtained for the amine system, e.g. an initial rate decrease in the H2O-rich region followed by an increasing rate trend upon further additions of MeCN in the MeCN-rich region. The rate behaviors shown by the amine system in the MeCN-rich and by the anionic system in the H2O-rich region are unexpected based on the Hughes-Ingold rules. The present unusual rate trends have been attributed to changes in the solvent structure and pKa of the nucleophiles upon the addition of MeCN into H2O. The effect of solvent appears to be more significant for the TS than the GS, and the TS structure is considered to become tighter in the higher MeCN concentration.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.95-100
• /
• 1993

Abstract Fourier transform infrared (FT -IR) instrument was used to st.udy the thermoset behavior of DGEBA/MDA system with succinonit.rile. That was experimented with the samples which were cured from 8$0^{\circ}C$ to 17$0^{\circ}C$ every 3$0^{\circ}C$ for 1 hour and uncured with different SN content. respect.ively. It was known that prImary amine hydrogen reacted wit.h epoxide group, secondary amine hydrogen with epoxide group and hydroxyl with epoxide group. In addition. the reaction of primary amine hydrogen with nitrile gorup of SN and of hydroxyl group with nitrile group of SN came about. These t.wo reactions made chain bond length longer between main chains.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.777-783
• /
• 2013

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These grafted N-H groups were reacted with glycidyl methacrylate (GMA) to introduce polymerizable methacrylate groups on the silica surface. After modification reaction, we used several analytical techniques such as Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to analyze the effects of reaction time, reaction temperature and used GMA concentration on the modification degree between N-H groups on the silica surface and epoxide groups of GMA. We found increased introduction of methacrylate groups on the silica surface by ring opening reaction of epoxide groups of GMA with N-H groups on BTMA treated silica with increased reaction time, reaction temperature and used GMA concentration within our experimental conditions.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.822-830
• /
• 2012

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These N-H groups were reacted with three different molecular weights (M.W. = 258, 575, and 700) of poly(ethylene glycol) diacrylates to introduce different attached layer thicknesses on the silica surface by Michael addition reaction. After Michael addition reaction, we used several analytical techniques such as fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy to characterize introduced structures. We found almost complete Michael addition reaction of both two acrylate groups of PDGDA with N-H groups of BTMA modified silica to form ${\beta}$-amino acid esters. Between equimolar ratio of pure BTMA and pure PEGDA reaction, only one acrylate group of two acrylate groups of PEGDA reacted with N-H groups of pure BTMA to form ${\beta}$-amino acid ester and the other remaining acrylate group can be used to form a polymer later.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.249-253
• /
• 2001

The purpose of this study is the development of the simple and precise sampling and analysis method of methyl isocyanate(MIC) in the work place as their secondary aliphatic amine derivatives by gas chromatography with flame ionization detector. The urea derivatives are quantitatively and simultaneously derived from MIC with secondary aliphatic amines such as dipropylamine(DPA), dibutylamine(DBA), and dipentylamine (DAA) in methylene chloride. The method is based on sampling glass tube in XAD-2 resin which is coated with secondary aliphatic amines. The samples are desorbed by $2m{\ell}$ methylene chloride and analysed using gas chromatography with flame ionization detector(GC/FID). In the results, the detection limit of the overall procedure and reliable quantity are $0.020-0.027{\mu}g$($1.347-1.740{\mu}g/m^3$(0.529-0.684 ppb) based on a 15 L air volume) MIC per sample. The average desorption efficiencies are 97.96 - 101.23 %. The results of versus storage time are high and stable recovery rates.

• YAKHAK HOEJI
• /
• v.35 no.3
• /
• pp.182-189
• /
• 1991

Systematic study on the extraction of ion pair by the use of picric acid (PCA) as an ion pair forming reagent to the aliphatic amines has not be done by spectrophotometric method. The extraction of ion pair by the use of PCA and 23 kinds of the aliphatic amines was examined. The procedure is as follows; Elving's buffer solution (pH 1.3~10, ionic strength 0.5) each amine solution, and PCA solution were taken into a test tube. The mixture was shaken mechanically with chlorform. The organic phase was filtered through a filter paper to remove water droplets. The absorbance was examined at $\lambda_{max}$ against a reagent blank. Primary and secondary whose carbon number were more than 7 or 6, respectively, are extractable as ion pairs with PCA, while tertiary amines and quaternary ammonium salts are also extractable without the correlation of carbon number. It was considered that the ion pair extraction of primary and secondary amines was affected by the number of carbon of amines, but its extraction of tertiary amines or quaternary ammonium salts was affected by kind of aliphatic amines rather than pKa values or carbon number of amines.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.79-86
• /
• 2005

In PSR on the Kori 3&4 NPP, The low level radioactive waste resin from SGBD demineralizer is more than $65\%$ of total waste resin in NPP So, it needs to be improved. The secondary cooling water pH control methods are used ammonia-AVT from the first. According to changing ETA which is better than ammonia, SGBD cation load is increased about 2-3 times. Waste resin product is also increased in proportion to the SGBD cation load. To reduce the waste volume, new cation resin exchange criteria is confirmed that demineralizer is almost saturated.