• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1008-1013
• /
• 2009

The theoretical simulation to predict the variation of supplying heat according to control methods of DHS(District Heating System) have been done by TRNSYS(A Transient System Simulation Program) 16. The physical system for DHS consists of primary and secondary supplying heating loop which is divided by based on heat exchanger for heating demand of building. The simulation results showed that control of secondary supplying heat had influenced more than primary supplying heat control to total energy consumption of DHS. And the outside temperature reset control of primary supplying heating loop could be reduced until about 4% overheating of each zone.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.105-114
• /
• 2009

A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.111-111
• /
• 2016

Two step PEO ceramic coatings were formed on AZ91 magnesium alloy in $ZrO_2$ nanoparticles and $K_2ZrF_6$ based colloidal electrolyte solution for various voltages. Surface and layers tructure of the coatings was analyzed using SEM (ScanningElectronMicroscope). Structure analysis revealed that surface of the coating was transferred from individual pancake or craters-based structure to cluster-based structure with increasing the voltage of the secondary step process. Further, it was confirmed that the cluster zone was richin Zr-based complexes and formed due to high intensives parks. Increase in the Zr contents as discovered from the EDS analysis confirmed the rise in amorphous form of the Zr-based species, which justified the results of XRD where no increase in the intensity of Zr-based species was observed with increase in voltage. Potentiodynamic polarizariotion and impedance spectroscopy techniques were used to evaluate the corrosion performance of the coatings. The highest corrosion resistance was found for coatings prepared at 240V. The same specimen was found having highest and uniform vickers hardness ~1070.5 HV. The superior mechanical and electrochemical properties of the said coating can be attributed to the defect-less microstructure and the optimal role of $ZrO_2$ nanoparticles in the secondary PEO process at 240V.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.238-244
• /
• 1994

To investigate the bacterial potentials for utilizing dissolved organic matter in highly eutrophic estuary, the annual fluctuations of microbiological and physicochemical environmental parameters were analyzed in Naktong River Estuary. Total bacterial number ranged from 0.33 to $2.09{\times}10^7$ cells/ml, and correlated with the heterotrophic bacterial numbers in more eutrophic sites, especially. Bacterial biovolume and biomass varied between 0.064 and 0.156 2.09${\mu}m^3$/cell, 0.163 and 1.036 ${\mu}g$-C/ml, respectively. Bacterial secondary productivity ranged from 0.24 to 60.86 ${\mu}g$-C/l/h, and showed high correlations with the environmental parameters of pollution indicator. The seasonal variation pattern of bacterial productivity in freshwater sites was high in winter and low in summer, which was interpreted as the results of pollution loads varied with the amount of rainfall. In seawater site, the pattern was different from those of freshwater sites; high in summer and low in winter. In this site, the values of bacterial productivity showed positive correaltions with chlorophyll a, heterotrophic bacterial number, and temperature (r>0.5, p<0.05). These results suggested that the main source of organic matter which influences the bacterial productivity may be allochthonous materials in the upper freshwater zone of Naktong River Barrage, and autochthonous algal excretory products in the lower seawater zone of Naktong River Barrage.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.131-145
• /
• 1994

The Daehung and Pyeongan talc mines are located in the Yoogoo area, Chungcheongnam-Do. These deposits occur as the complex vein type in the ultramafic rocks which intruded Precambrian gneiss. The talc ore formed from sepentinitt: originated from ultramafic rocks but some of those from hornblende gneiss. The talcification processes were considered here on the basis of the mineral assemblages, paragenesis, and geochemistry. It appears that there are five processes in talcification ; serpentine$\rightarrow$talc, phlogopite$\rightarrow$chlorite$\rightarrow$talc, phlogopite$\rightarrow$talc, hornblende$\rightarrow$chlorite$\rightarrow$talc, and hornblende$\rightarrow$talc. Among them, the most dominant alteration path is serpentine to talc in these deposits. EPMA data suggest that there might be interstratified minerals were in between parent mineral and talc such as serpentine and talc, and phlogopite and talc. It can be found that tremolite exists in between the inner and outer most part of talcified serpentinite blocks coated with phlogopite. Some of tremolites has been altered to talc. The quartz veins and carbonate minerals were found in the talc ore zone. It indicates that the hydrothermal solution played an important role in talcification. The hydrothermal alteration occured after sepentinization. Ore zones can be divided into two zones; talc-serpentine zone preserving a pseudormorph of olivine (mesh texture) and talc-phlogopite zone showing talcification from phlogopite directly or through chlorite. It can be concluded that the formation of major talc ore body was due to talcification of serpentinite and phlogopite by hydrothermal solution. A nature of hydrothermal solution was relatively pure water at the beginning of serpentinization, and was getting richer in silica composition. There was a large amount influx of K and AI with hydrothermal solution in the later stage, and increased $P_{CO_{2}}$ also. It suggests that phlogopite formed in later stages as a secondary mineral. So, the major part of the talc ore body was formed from one parents rocks, serpentinite originated from ultramafic rocks, by hydrothermal solutions at several times.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.151-158
• /
• 1990

Various factors may contribute on the mixing processes in the surf zone formed by irregular waves. The turbulence motion driven by wave breaking may be one of the major causes, the effect due to spatial variation on current velocity be a secondary one, and the additional process may result from the irregular superposition of radiation stresses or wave breaking dissipation incurred by random breaking waves in a broadened surf zone. In the present study a numerical model of spectral waves and induced currents was developed using a superposition technique with ${\kappa}-{\varepsilon}$ closure for mixing process and applied to a field situation of longshore current generated by spectral waves on a uniform beach. It was found from the application that the surf-zone mixing processes formed by irregular waves can be well described by using ${\kappa}-{\varepsilon}$ equations if the source of ${\kappa}$ is properly represented. The nonlinear energy transfer was also found to have some influence on the velocity profile of longshore current particularly in very shallow water region near coast.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.4
• /
• pp.258-262
• /
• 2005

Objective: The 5th lumbar spinal nerve can be entrapped in the intraspinal zone, foraminal zone, and the extraforaminal zone simultaneously. The failure to recognize that the nerve root can be compressed in such manners may be the reason of a number of failures of surgical decompression. Here we describe a microsurgical method for the decompression of the triple entrapment of the L5 spinal nerve in 21 patients. Methods: Clinical manifestations and surgical results of twenty-one patients treated surgically under the diagnosis of the triple entrapment of the L5 spinal nerve were reviewed retrospectively. All patients were treated by the posterior midline approach for the intraspinal entrapment and by the paraspinal approach for the foraminal and the extraforaminal entrapment. Results: Pain relief was obtained in all patients immediately after surgery. The mean follow-up period after the surgery was 13 months, ranged from 6 to 24 months. The mean Numeric Rating Scale (pain score) improved from 8.9 before the surgery to 1.4 (P<0.0001). The mean ODI scores improved from 76.2 before the surgery to 13.1 (P<0.0001). Nineteen patients were satisfied with their result at the last follow-up examination. Neither complications related to the surgery, nor the spinal instability was detected. Conclusion: The triple entrapment of the 5th lumbar spinal nerve is an important pathologic entity to identify for the treatment of L5 radiculopathy. Combined medial and lateral approaches are safe, minimally invasive and it provide the complete decompression of triple entrapment of the L5 spinal nerve without causing secondary instability like after complete facetectomy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.529-535
• /
• 2011

The HF communication method is capable of communicating short and long distances without a separate relaying method and is used as the primary/secondary communication method in other nations. However, the Korean military strongly discouraged the use of the method due to issues regarding the skip zone and the fact that the usable frequency changes according to irregularities in the ionosphere. The NVIS communication is less susceptible to noise than typical communications using ionosphere reflection, and is also able to communicate short distances containing skip zones. In this paper, we inspect the NVIS communication methods of foreign nations in order to facilitate the use of HF communications, as well as provide solutions to the issues mentioned above. This paper explains the concept of NVIS communication, and investigates how the Korean military is implementing HF communications based on actual communications data of military corps. Based on this result, we have verified the possibility of overcoming skip zones through NVIS communications, and have considered the applicability of a prediction program in order to enhance the efficiency of HF communications.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.189-214
• /
• 2000

Three study areas of Kwanak campus(Seoul National University), Gapyung and Boeun were selected and classified according to bedrock types in order to investigate soil-gas radon concentrations. Several soil-gas samples showed relatively high radon concentrations in the residual soils which derived from granite bedrock. It also showed that water content of soil and the degree of radioactivity disequilibrium was a secondary factor governing radon emanation and distribution of radon radioactivity. The results of radon concentrations and working levels for forty rooms in Kwanak campus, Seoul National University, showed that indoor basement rooms under poor ventilation condition can be classified as high radon risk zone having more than EPA guideline(4 pCi/L). Some results of section analysis which was surveyed in the fault zone of Kyungju and Gapyung area confirmed the existence of fault-associated radon anomalies with a meaning of radon risk zone.

• The Journal of Korean Physical Therapy
• /
• v.15 no.1
• /
• pp.155-170
• /
• 2003

Lumbar segmental instability is considered to represent a significant sub-group within the chronic low back pain population. This condition has a unique clinical presentation that displays its symptoms and movement dysfunction within the neutral zone of the motion segment. The loosening of the motion segment secondary to injury and associated dysfunction of the local muscle system renders it biomechanically vulnerable in the neutral zone. There in evidence of muscle dysfunction related to the control of the movement system. There is a clear link between reduced proprioceptive input, altered slow motor unit recruitment and the development of chronic pain states. Dysfunction in the global and local muscle systems in presented to support the development of a system of classification of muscle function and development of dysfunction related to musculoskeletal pain. The global muscles control range of movement and alignment, and evidence of dysfunction is presented in terms of imbalance in recruitment and length between the global stability muscles and the global mobility muscles. The local stability muscles demonstrate evidence of failure of aeequate segmental control in terms of allowing excessive uncontrolled translation or specific loss of cross-sectional area at the site of pathology Motor recruitment deficits present as altered timing and patterns of recruitment. The evidence of local and global dysfunction allows the development of an integrated model of movement dysfunction. The clinical diagnosis of this chronic low back pain condition is based on the report of pain and the observation of movement dysfunction within the neutral zone and the associated finding of excessive intervertebral motion at the symptomatic level. Four different clinical patterns are described based on the directional nature of the injury and the manifestation of the patient's symptoms and motor dysfunction. A specific stabilizing exercise intervention based on a motor learning model in proposed and evidence for the efficacy of the approach provided.