• Journal of architectural history
• /
• v.20 no.2
• /
• pp.7-22
• /
• 2011

This study primarily aims to illuminate the characteristics of $Meoreum$ in Korean traditional fitting system according to the respective types and its periodical changes. Using the research findings as a chronological indicator by which to estimate the construction date of the building is the secondary purpose. In this study 42 of $Byeoldang$ and pavilion architecture remaining in $Yeongnam$ district were examined through the field surveys and methods of documentary research. The research results are as follows. First, $Meoreum$, which is located below the windows or doors, provides protection against the outer wind and has the function to prevent some warm air of the room from flowing outside. Second, $Meoreum$ was recorded as $Yoeum$(了音), $Woneum$(遠音), and $Maleum$(末音) in $Yeong-geon-ui-gwe$(營建儀軌) of Joseon period. While $Yoeum$(了音) was used in $Yeong-geon-ui-gwe$(營建儀軌) of 1776 and 1856, $Woneum$(遠音) had been also used continuously since the year of 1800. The word, $Maleum$(末音) can be seen in $Lim-won-gyeong-je-ji$(林園經濟志), published in 1827. $Woneum$(遠音) and $Maleum$(末音) seem to be the $Yi-du$(吏讀) types of expression of $Meoreum$ which is being extensively used now. Third, the kinds of $Meoreum$ can be classified as $TohMeoreum$, $TongMeoreum$, $TongpanMeoreum$, and $JjaneunMeoreum$. $TongMeoreum$ and $TohMeoreum$ were mostly used at the front part of $Ondol-rooms$, the backside of main floor called $Daechung$(大廳), and at the space between $Daechung$ and rooms in the Pavilions and $Byeoldangs$(Annexes) that had been built in the early Joseon dynasty. $TohMeoreum$ was usually used at the bottom parts of windows between $Daechung$ and $Ondol-rooms$. $TongpanMeoreum$ was mainly used in the mid-Joseon period and relatively high height was the distinctive feature of $Meoreum$ at that time. $Jjaneun$ $Meoreum$, used mainly in the late Joseon dynasty, has become lower and lower gradually in height since 19th century, so people could enter the room through the windows(fittings). Such changes in $Meoreums$ types has brought about the flow of human traffic directly from $Toenmaru$, narrow wooden porch running along the outside of a room to $Ondol-rooms$.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.167-173
• /
• 2020

This study aims to analyze the number and trend of news media news through timely analysis of how the articles about airlines and employees show changes before and after Corona19 in the situation where the world economy faces various problems due to the global pandemic of Corona19. For this purpose, the number of articles and trends related to airlines and employees were analyzed and visualized before and after Corona19 using the Korea Press Foundation Bigkinds news analysis service. For this purpose, the Bigkinds service system was extracted from January 1, 2019 to May 31, 2019 and from January 1, 2020 to May 31, 2020. The results of the analysis showed that the number of articles before and after Corona 19 exploded when aviation related events occurred. And it was confirmed that the trend is changing due to the restructuring news. Government and airlines will need to make active efforts to overcome the crisis in the aviation industry due to the impact of Corona 19. The results of this study are significant in that it analyzed the number and trends related to news articles before and after Corona 19, and suggested practical implications for establishing strategies for the future impacts on airlines and employees.

• Journal of Environmental Policy
• /
• v.11 no.4
• /
• pp.85-105
• /
• 2012

In this paper, the energy efficiency of wastewater utilities was evaluated to explore ways to save energy via operational measures. The correlation of each wastewater characteristic parameter to energy was assessed to find a set of parameters that explained most of the variations in energy use among utilities. The results show that increases in inflow, influent COD concentration, and ratio of advanced treatment generally increased the energy use. On the other hand, increases in load factor (influentaverage flow/design flow) reduced the energy use. In the regression analysis, the energy efficiency was highest in the A2O advanced process. On the other hand, the membrane process (among the advanced processes) and the contacted aeration process (among the secondary processes) require more efforts in saving energy. However, the data base system related to energy use must be supplemented in order for more accurate analysis of energy consumption in wastewater treatment facilities. In particular, i) electricity consumption of relay pumps and, ii) energy usage per unit process, iii) pump power usage to discharge treated wastewater in a long distance, if necessary, and iv) alternative energy production and utilization status must be recorded. By utilizing the results of the analysis conducted in this study, it is possible to quantify a level of energy savings needed and establish customized energy saving measures to achieve a certain target level for benchmarking a successful case of wastewater utilities.

• Journal of The Korean Association For Science Education
• /
• v.8 no.1
• /
• pp.1-22
• /
• 1988

The educational policy of a nation should be based on the results of nation-wide studies and their analyses. This study is the third one in a series of research on "development of improvement plan and monitoring system for secondary school science", focusing on the three major areas, such as students' achievements, science instruction and conditions for science education in vocational high schools. In general, the results showed that science achievements in vocational high schools were significantly lower than those of general high schools. While the achievement level in physics was lower by one percent, the achievement levels in chemistry and biology were significantly lower by more than 5 percents. In the case of scientific inquiry, the results showed much lower scores compared to those of general high schools. Concerning the inquiry abilities, most of the students did not possess the formal operational thinking skills such as controlling variables and combinatorial thinking. The ability of experimental skills seemed to be closely related to the students' majors. Students in industrial arts schools could measure electric resistance very well, while students in agricultural high school students failed completely. In the area of students' attitude toward science, the greater part of the students had the experiences of using scientific equipments (68.6 %), experimentation (54.3 %), and extracurricular science activities (56.9 %). They also showed positive attitude towards the nature of science (59.8%). The results of the survey on science instruction and school conditions for science education showed the needs for improvement In general, the priority of science education in vocational high schools was very low compared to their major subjects. The teachers as well as students thought science text books nor to be difficult These responses and the low achievement levels seemed to be contradictory to each other. The facilities for science experiments were better equipped and installed to general high schools. However. the lack of budget was a major problem for performing experiments uning the facilities. Therefore. science education in vocational high school have many things to be improved For the improvement of science education in vocational high schools, financial support as well as the intention for the improvement must be the essential factors.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.135-139
• /
• 2016

Background: The ultimate goal of craniofacial reconstructive surgery is to achieve the most complete restoration of facial functions. A bioabsorbable fixation system which does not need secondary operation for implant removal has been developed in the last decade. The purpose of this study is to share the experience of authors and to demonstrate the efficacy of bioabsorbable mesh in a variety of craniofacial trauma operations. Methods: Between October 2008 and February 2015, bioabsorbable meshes were used to reconstruct various types of craniofacial bone fractures in 611 patients. Any displaced bone fragments were detached from the fracture site and fixed to the mesh. The resulting bone-mesh complex was designed and molded into an appropriate shape by the immersion in warm saline. The mesh was molded once again under simultaneous warm saline irrigation and suction. Results: In all patients, contour deformities were restored completely, and bone segments were fixed properly. The authors found that the bioabsorbable mesh provided rigid fixation without any evidence of integrity loss on postoperative computed tomography scans. Conclusion: Because bioabsorbable meshes are more flexible than bioabsorbable plates, they can be molded and could easily reconstruct the facial bone in three dimensions. Additionally, it is easy to attach bone fragments to the mesh. Bioabsorbable mesh and screws is effective and can be easily applied for fixation in various craniofacial trauma reconstructive scenarios.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.69-75
• /
• 2018

Recently, Non-orthogonal multiple access (NOMA) has been focused for the next generation multiple access, which has more spectral efficiency under the limited spectrum bandwidth. Moreover, the spectrum efficiency can be improved by cognitive radio in which the unlicensed secondary users can access the spectrum that is used by the licensed primary user under the limited interference. Hence, we consider the combination of NOMA and cognitive radio, and derive the performance of the cognitive cooperative NOMA system. For the cooperation, a relay is selected among near users, and the selection combining is assumed at a far user. The outage probability of the selected relay and the far user is derived in closed-form, respectively. The provided numerical results are matched well with the Monte Carlo simulation. Numerical results showed that the performance of the relay is affected from the power allocation coefficient, the minimum outage probability is observed at 0.86 of the power allocation coefficient for far user under the given conditions. More than 15 dB of signal-to-noise ratio is required to meet the outage probability of $1{\times}10^{-13}$ for the far user with the frequency acquisition probability of 0.5 compared to that of 1. It shows that the performance of the far user is very sensitive to the acquisition probability of the cognitive relay.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.1-9
• /
• 2009

In this paper, a small area 12-bit 300MSPS CMOS Digital-to-Analog Converter(DAC) is proposed for display systems. The architecture of the DAC is based on a current steering 6+6 segmented type, which reduces non-linearity error and other secondary effects. In order to improve the linearity and glitch noise, an analog current cell using monitoring bias circuit is designed. For the purpose of reducing chip area and power dissipation, furthermore, a noble self-clocked switching logic is proposed. To verify the performance, it is fabricated with $0.13{\mu}m$ thick-gate 1-poly 6-metal N-well Samsung CMOS technology. The effective chip area is $0.26mm^2$ ($510{\mu}m{\times}510{\mu}m$) with 100mW power consumption. The measured INL (Integrated Non Linearity) and DNL (Differential Non Linearity) are within ${\pm}3LSB$ and ${\pm}1LSB$, respectively. The measured SFDR is about 70dB, when the input frequency is 15MHz at 300MHz clock frequency.

• Journal of The Korean Association For Science Education
• /
• v.19 no.2
• /
• pp.340-352
• /
• 1999

Constructivist theory and teaching science in the social context are a main stream in science education. This study was purposed to introduce the STS in-service program implementing in Chonnam National University. and to analyze the results of the program in terms of changes of teachers' and students' perceptions and attitudes. The major features of the STS in-service program were as follows: teacher-centered. teaching in the social context. emphasis on constructivist approach. development of STS module and implementations. A total of 20 secondary science teachers participated in the in-service program. and filled out two questionnaires. Science Education Reform Inventory and Constructivist Teachings Survey. Three of the 20 teachers were selected to gain information from their implementations of a STS module into their respective classrooms. The students completed two instruments. Constructivist Learning Environment Survey. and Scientific Attitude Survey. The responses from teachers and students are as follows: 1. The participating teachers were very aware of the necessity of reform in science education. and the degree of the perception of the necessity increased after the STS in-service program. 2. The STS program significantly improved constructivist teaching techniques. 3. The perceptions of the students about constructivist learning environments improved significantly after the STS in-service program. 4. Students' scientific attitudes improved significantly through STS approach. The STS in-service program with the above mentioned features was found to be effective in our current school system. and could be implemented successfully if teachers were willing to learn and participate in the reforms of science education.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.659-681
• /
• 2001

Platelet-rich plasma(PRP) has been known to increase the rate and degree of bone formation by virtue of growth factors in concentrated platelets. Although its great healing effect on bone defect or pre-implantation site preparation in conjunction with bone substitute has been reported, the effect associated with implant is unknown. The purpose of this study was to investigate the effect of PRP on rapid osseointegration of endosseous dental implants in the rabbit tibiae. Twenty two adult female New Zealand white rabbits, weighing approximately 2.7-3.3kg, were used for this study. Twelve of the 22 animals were used for histomorphometric analysis and ten of the 22 were for removal torque test. Each animal received two implants in each tibia (two treated with PRP and two as control) and was given fluorochrome intramuscularly. For histomorphometric analysis, rabbits were divided into four groups according to the healing period. At 1 week, 2 weeks, 4 weeks and 8 weeks postoperatively, each three animals were sacrificed serially and the amount and rate of bone formation around dental implant were examined on the undecalcified sections under fluorescent microscope, polarized microscope and light microscope connected to a personal computer equipped with image analysis system. For removal torque test, rabbits were divided into two groups and removal torque tests were performed at 4 weeks, 10 weeks after implant placement. In total, 88 screw shaped, commercially pure titanium implants (Neoplant, Neobiotech, Seoul, Korea) were used in this study. Labeling pattern reflected differences of two groups in bone formation rate at each period. Histomorphometrically, PRP group showed significantly higher bone volume within threads compared to control group at 2 weeks ($70.30{\pm}4.96%$ vs. $50.68{\pm}6.33%$; P < .01) and 4 weeks ($82.59{\pm}5.94%$ vs. $72.94{\pm}4.57%$; P < .05 ). PRP group at 1, 2 and 4 weeks revealed similar degree of bone volume formation comparable to control group at 2, 4 and 8 weeks, respectively. On the other hand, while PRP group showed higher bone-implant contact ($47.37{\pm}8.09%$) than control group ($33.16{\pm}13.47%$) at 2 weeks, there were no significant differences between PRP group and control group for any experimental period. Removal torque values also showed no significant differences between PRP group and control group at any experimental period (P > .05). These findings imply that PRP could induce rapid, more bone formation around implant during early healing period and get faster secondary stability for reducing healing period, though it has not induced bone maturation enough to resist functional loading.

• Physical Therapy Korea
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2012

The purpose of this study was to investigate the kinematic and kinetic changes that may occur in the pelvic and spine regions during cross-legged sitting postures. Experiments were performed on sixteen healthy subjects. Data were collected while the subject sat in 4 different sitting postures for 5 seconds: uncrossed sitting with both feet on the floor (Posture A), sitting while placing his right knee on the left knee (Posture B), sitting by placing right ankle on left knee (Posture C), and sitting by placing right ankle over the left ankle (Posture D). The order of the sitting posture was random. The sagittal plane angles (pelvic tilt, lumbar A-P curve, thoracic A-P curve) and the frontal plane angles (pelvic obliquity, lumber lateral curves, thoracic lateral curves) were obtained using VICON system with 6 cameras and analyzed with Nexus software. The pressure on each buttock was measured using Tekscan. Repeated one-way analysis of variance (ANOVA) was used to compare the angle and pressure across the four postures. The Bonferroni's post hoc test was used to determine the differences between upright trunk sitting and cross-legged postures. In sagittal plane, cross-legged sitting postures showed significantly greater kyphotic curves in lumbar and thoracic spine when compared uncrossed sitting posture. Also, pelvic posterior tilting was greater in cross-legged postures. In frontal plane, only height of the right pelvic was significantly higher in Posture B than in Posture A. Finally, in Posture B, the pressure on the right buttock area was greater than Posture A and, in Posture C, the pressure on the left buttock area was greater than Posture A. However, all dependent variables in both planes did not demonstrate any significant difference among the three cross-legged postures (p>.05). The findings suggest that asymmetric changes in the pelvic and spine region secondary to the prolonged cross-legged sitting postures may cause lower back pain and deformities in the spine structures.