• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.145-154
• /
• 1998

The effects of secondary task on driving performance and subjective workload were investigated during a simulated driving. The driving performance was determined by the appropriateness of break timing. The driving simulator was provided by the Korea Road Traffic Safety Association. The subjective workload was tested by using a multidimensional measure such as NASA-TLX. Road was categorized into two types: narrow alley and wide street. The secondary task included pushing the number on the cellular phone, pushing radio channel, and conversing with a passenger. Seventeen subjects volunteered in the study. The data were analyzed by using SAS. Results showed that using the cellular phone and pushing channel during driving caused 3∼22% decline of driving performance and 42∼59% increase of subjective workload respectively. These results indicated that the secondary task could be potentially dangerous although there was not a significant performance decrease due to the notable increase of mental workload. In the future, if we can use a more sensitive and realistic driving simulator, the effects of secondary task under a dynamic driving situation can be investigated.

• Hwankyungkyoyuk
• /
• v.22 no.1
• /
• pp.110-119
• /
• 2009

To promote environmental education of elementary and secondary school in Seoul for a sustainable development, researchers investigated and analysed the current situation of formal and non-formal environmental education in Seoul as well as their major problems. Based on these current situation and problems, the way to improve the environmental education of elementary and secondary school in Seoul was described. The final section deals with specific recommendations to accomplish the improvement of environmental education of elementary and secondary school in Seoul for a sustainable development as follows: 1) Integration of formal and non-formal environmental education system, 2) Establishment and operation of a regional environmental education center for community, 3) International cooperation, and 4) To provide high quality environmental education programs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.667-675
• /
• 2002

In this Paper, we present a new nonlinear active noise control scheme using neural networks. Two neural network4 are used, one is for the active controller and another one is for the secondary path model. This scheme is suitable for the plant which has time-varing secondary path dynamics, because the secondary path modeling is performed via on-line fashion. Simulation results of active noise control with nonlinear primary/secondary path are presented. The results show that the new algorithm can reduce the noise level greatly.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.22-25
• /
• 2004

In active noise control (ANC) system, the convergence behavior of the Filtered- X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortion in the secondary path as in the power amplifiers (e.g., saturation), loudspeakers and transducers. This distortion may yields degrading the error reduction performance of the ANC systems. In this paper, the authors of this paper propose a more improved and stable FXLMS algorithm to compensate for the undesirable nonlinearity of the secondary-path, whereby the third-order Volterra model was employed for the identification of the nonlinear secondary-path. In particular, the proposed approach was based on the modification of the conventional FXLMS algorithm. Finally, the simulation results showed that the proposed approach yields better convergence property and more stable performance in the ANC systems.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.128-133
• /
• 2006

Influence of changing combustor pressure on flame stabilization and nitrogen oxide (NOx) emission in the swirl-stabilized flame with secondary fuel injection was investigated. The combustor pressure was controlled by suction at combustor exit. Pressure index ($P{\ast}=P_{abs}/P_{atm}$), where $P_{abs}$ and $P_{atm}$ indicated the absolute pressure and atmosphere pressure, was controlled in the range of $0.7{\sim}1.3$ for each equivalence ratio conditions. The flammable limits of swirl flames were largely influenced by changing combustor pressure and they showed different tendency compared with laminar flames. Emission index showed maximum value near atmospheric condition and decreased with decreasing pressure index for overall equivalence ratio conditions. R.m.s of pressure fluctuations also showed similar tendency with nitric oxide emission. By injecting secondary fuel into flame zone, the flammable limits were extended significantly. Emission index of nitric oxide and r.m.s. of pressure fluctuations were also controlled by injecting secondary fuel. The swirl flames were somewhat lifted by secondary fuel with high momentum, hence low nitric oxide emission. This NOx reduction technology is applicable to industrial furnaces and air conditioning system by adopting secondary fuel injection.

• Journal of computational fluids engineering
• /
• v.5 no.3
• /
• pp.8-15
• /
• 2000

This research is aimed to find out how the inlet angle of secondary air affects the uniformity of temperature distribution inside a small incinerator. A commercial code, PHOENICS, is used to simulate the thermal-flow field of an incinerator. The computational grid system is constructed by Multi-Block technique provided by PHOENICS. Numerical experiments are done with the five different angles of secondary air inlet. The uniformity of temperature distribution is evaluated by checking the standard deviation of temperature distribution in an incinerator. The computational results show that there is the minimum value of standard deviation at the certain angle of secondary air inlet, which means that there is an optimum angle of secondary air inlet that could improve the uniformity of temperature distribution in an incinerator. The optimum angle of secondary air inlet is between 30 degree and 45 degree in this particular case.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.93-95
• /
• 2005

Coupling capacitor voltage transformers (CCVT) are widely used in high voltage power systems to obtain standard low voltage signal for protective relaying and measuring instruments. To obtain high accuracy, capacitances and inductances are tuned to the power system frequency, making a parallel resonant circuit. When no fault occurs, no distortion of the secondary voltage is generated. However, when a fault occurs, harmonics generated break the resonance between capacitances and inductance, which generates the distortion of the secondary voltage. This paper proposes an algorithm for compensating the secondary voltage of the CCVT. With the values of the secondary voltage of the CCVT, the secondary currents, the primary currents and the voltages across the capacitors and inductor are calculated. Test results indicate that the proposed algorithm can compensate the distorted secondary voltage of the CCVT, and is irrespective of the fault distance, the fault inception angle and the burden.

• Journal of Plant Biotechnology
• /
• v.3 no.2
• /
• pp.45-57
• /
• 2001

Trees have the ability to undergo secondary growth and produce a woody body. This tree-specific growth is affected by the secondary vascular system and the developmental continuum of secondary phloem and xylem. Secondary growth is one of the most important biological processes on earth. Considering its economic and environmental significance, our knowledge of tree growth and development is surprisingly limited. Trees have received little attention as model species in plant science, as most Plant biology questions can be best addressed by using herbaceous model species, such as Arabidopsis. Furthermore, tree biology is difficult to study mainly due to the inherent problems of tree species, including large size, long generation time, large genome size, and recalcitrance to biotechnological manipulations. Despite all of this, one must rely on trees as models to study tree-specific questions, such as secondary growth, which cannot be studied effectively in non-woody model species. Recent advances in genomics technology provide a unique opportunity to overcome these inherent tree-related problems. Several groups, including our own, have been successful in studying the biology of wood formation with a variety of hardwood and softwood species. In this article, 1 first review the current understanding of tree growth and then discuss the recent attempts to fully explore and realize the potential of molecular biology as a tool for enhanced understanding of secondary growth.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.34-39
• /
• 2014

In cognitive radios, secondary users can use the spectrum exclusively allocated to a primary wireless system if the secondary users detect the spectrum in idle states. Because the secondary users can utilize the idle state of the spectrum, the utilization rate of the spectrum can be improved. The idle states can be detected by using secondary users' sensing schemes. However, the wireless channel environment where secondary users perform the spectrum sensing is not very friendly to secondary users because the signal-to-noise ratio of the received primary signal is very low. Hence, cooperative sensing scheme where more than one secondary user take part in the spectrum sensing is generally used in cognitive radios. In this paper, we investigate the cooperative sensing performance for machine-to-machine communication devices operated by batteries with limited energy. In general, the energy consumed for the spectrum sensing increases as the length of the sensing period and the number of cooperative sensing nodes. Accordingly, even though the total amount of the consumed energy is the same, an energy allocation methodology how to distribute the energy to the sensing period and sensing nodes can achieve the optimum sensing performance, which is numerically analyzed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.