• KSBB Journal
• /
• v.14 no.1
• /
• pp.36-44
• /
• 1999

The biosynthesis of Lovastatin, a cholesterol lowering agent formed by the filamentous fungus Aspergillus terreus, was investigated in shaking flask. The effects of essential elements in the experimental medium such as carbon, nitrogen, phosphate sources, and amino acids were examined to increase Lovastatin productivity. Lovastatin production in shaking flasks was 68 mg/L in the used medium. Effect of carbon source on Lovastatin production was performed. As a carbon source in the medium, 45 mL/L of glycerol increased the Lovastatin production up to 256 mg/L, which was found to be improved almost 3.5 times in comparison with that in common medium. The optimum concventration of peptonized milk as nitrogen source was obtained 30g/L on Lovastatin production. The severe inhibition of the cell growth and the Lovastatin production were observed in shaking flasks conducted at the medium contained ammonium carbonate as a nitrogen source. Lovastatin production various concentrations of several phosphate compounds was also examined. The addition of either potassium phosphate diabsic or sodium phosphate dibasic increased the Lovastatin production and the optimal level of potassium phosphate dibasic was 6 g/L. Even though Lovastatin contain methionine-derived methyl group, L-methionine and DL-methionine tend to diminish the Lovastatin production. Among the amino acids, L-histidine and L-tryptophan had a remarkable enhancing effect on the Lovastatin production. The optimal concentration of L-histidine and L-tryptophan was 6g/L.

• Korean Journal of Community Nutrition
• /
• v.22 no.3
• /
• pp.207-217
• /
• 2017

Objectives: The aim of this study was to examine self-management status, nutritional knowledge, barrier factors in dietary management and needs of nutritional management program for women with Gestational Diabetes Mellitus (GDM). Methods: A total of 100 women with GDM were recruited from secondary and tertiary hospitals in Seoul. The questionnaire composed of general characteristics, status of self-management, dietary habits, nutrition knowledge, barrier factors in dietary management, needs for nutrition information contents and nutritional management programs. Data were collected by a self-administered questionnaire. All data were statistically analyzed using student's t-test and chi-square test using SAS 9.3. Results: About 35% of the subjects reported that they practiced medical nutrition and exercise therapy for GDM control. The main sources of nutrition information were 'internet (50.0%)' and 'expert advice (45.0%)'. More than 70% of the subjects experienced nutrition education. The mean score of nutrition knowledge was 7.5 point out of 10, and only about half of the subjects were reported to be correctly aware of some questions such as 'the cause of ketosis', 'the goal of nutrition management for GDM', 'the importance of sugar restriction on breakfast'. The major obstructive factors in dietary management were 'eating more than planned when dining out', 'finding the appropriate menu when dining out'. The preferred nutrition information contents in developing management program were 'nutritional information of food', 'recommended food by major nutrients', 'the relationship between blood glucose and food', 'tips on menu selection at eating out'. The subjects reported that they need management program such as 'example of menu by calorie prescription', 'recommended weight gain guide', 'meal recording and dietary assessment', 'expert recommendation', 'sharing know-how'. Conclusions: Based on the results of this study, it is necessary to develop a program that provide personalized information by identifying the individual characteristics of the subjects and expert feedback function through various information and nutrition information contents that can be used in real life.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.3
• /
• pp.320-328
• /
• 2016

Among biogenic volatile organic compounds (BVOCs) in the natural ecosystem, monoterpenes, along with isoprene, play important roles in atmospheric chemistry and make significant impacts on air pollution and climate change, especially due to their contribution to secondary organic aerosol production and photochemical ozone formation. It is essential to measure monoterpene concentrations accurately for understanding their oxidation processes, emission processes and estimation, and interactions between biosphere and atmosphere. Thus, traceable calibration standards are crucial for the accurate measurement of monoterpenes at ambient levels. However, there are limited information about developing calibrations standards for monoterpenes in pressured cylinders. This study describes about developing primary standard gas mixtures (PSMs) for monoterpenes at about 2 nmol/mol, near ambient levels. The micro-gravimetric method was applied to prepare monoterpene (${\alpha}$-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) PSMs at $10{\mu}mol/mol$ and then the PSMs were further diluted to 2 nmol/mol level. To select an optimal cylinder for the development of monoterpene PSMs, three different kinds of cylinders were used for the preparation and were evaluated for uncertainty sources including long-term stability. Results showed that aluminum cylinders with a special internal surface treatment (Experis) had little adsorption loss on the cylinder internal surface and good long-term stability compared to two other cylinder types with no treatment and a special treatment (Aculife). Results from uncertainty estimation suggested that monoterpene PSMs can be prepared in pressured cylinders with a special treatment (Experis) at 2 nmol/mol level with an uncertainty of less than 4%.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.1
• /
• pp.51-56
• /
• 2016

Particulate matter (PM) in the atmosphere has wide-ranging health, environmental, and climate effects, many of which are attributed to fine-mode secondary organic aerosols. PM concentrations are significantly enhanced by primary particle emissions from traffic sources. Recently, in order to reduce $CO_2$ and increase fuel economy, gasoline direct injected (GDI) engine technology is increasingly used in vehicle manufactures. The popularization of GDI technique has resulted in increasing of concerns on environmental protection. In order to better understand variations in chemical composition of particulate matter from emissions of GDI vehicle versus a port fuel injected (PFI) vehicle, a high time resolution chemical composition of PM emissions from GDI and PFI vehicles was measured at facility of Transport Pollution Research Center (TPRC), National Institute of Environmental Research (NIER), Korea. Continuous measurements of inorganic and organic species in PM were conducted using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS). The HR-ToF-AMS provides insight into non-refractory PM composition, including concentrations of nitrate, sulfate, hydrocarbon-like and oxygenated organic aerosol, and organic mass with 20 sec time resolution. Many cases of PM emissions during the study were dominated by organic and nitrate aerosol. An overview of observed PM characteristics will be provided along with an analysis of comparison of GDI vehicle versus PFI vehicle in PM emission rates and oxidation states.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.103-110
• /
• 1999

A thromboembolic event in patients later given a diagnosis of cancer is the result rather than the cause of the cancer. The risk of hidden cancer is significantly higher for patients with recurrent idiopathic thromboembolism compared to those with secondary deep vein thrombosis. Microemboli from hepatic or adrenal metastases and large-sized emboli from the great veins invaded by the tumor are the sources of tumor embolization The intraarterial tumor emboli less likely invade the arterial wall. Thrombus formation and organization may be capable of destroying tumor cells within pulmorlary blood vessels. Therefore, all tumor emboli are not true metastases. The treatment of deep vein thrombosis and pulmonary embolism in patients with cancer consists of anticoagulation with heparin and warfarin, venacaval filters, appropriate anti-neoplastic agents, and surgical methods(embolectomy, thromboendarterectomy). However, considerable literatures suggest that oral anticoagulant such as warfarin is ineffective in the treatment of those. We report a case of primary unknown squamous cell carcinoma incidentally found in the thrombus after pulmonary embolectomy.

• Atmosphere
• /
• v.29 no.4
• /
• pp.403-416
• /
• 2019

Precipitation samples were collected at the GAW Stations in Anmyeon-do and Gosan for 10 years (2008-2017) to analyze pH, electrical conductivity and NH₄⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, SO₄^2-, NO₃^-, Cl^-, and F^- ions. From the analysis, the correlation between pH and rainfall, the composition of precipitation and comparison with other regions, and the results of neutralization characteristics by seasonal and pH were determined. In the comparison of ion balance and conductivity for the validation of analytical data, the correlation coefficients were within the range of 0.996~0.999, implying good linear relationship. The volume-weighted pH of the Anmyeon-do and Gosan areas were 4.7 and 4.9, respectively. The pH of the rainfall was affected by washout and rainout in both areas. The ionic strength of precipitation at Anmyeondo and Gosan were 0.42 ± 0.63 mM and 0.37 ± 0.75 mM, indicating about 27.6% and 35.3% of the total precipitation as per a pure precipitation criterion (10^-4 M), respectively. The composition ratio of ionic species were 44.7% and 57.5% for marine sources (Na⁺, Mg²⁺, Cl^-), 40.6% and 22.2% for the secondary inorganic components (NH₄⁺, nss-SO₄^2-, NO₃^-), and 5.6% and 4.0% for the soil source (nss-Ca²⁺), respectively. The neutralization factor of Anmyeon-do and Gosan were 0.43~0.65 and 0.34~0.48, and the neutralization factors of calcium carbonate were 0.15~0.34 and 0.25~0.30, respectively. Thus, both regions have the highest rate of neutralization caused by ammonia. As pH increased in Anmyeon-do and Gosan, change in calcium carbonate became greater than that in ammonia.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.280-287
• /
• 2015

The high time-resolution monitoring data are essential to estimate rapid changes in chemical compositions, concentrations, formation mechanisms, and likely sources of atmospheric particulate matter (PM). In this study, $PM_{2.5}$ sulfate, $PM_{2.5}$, $PM_{10}$, and the number concentration of size-resolved PMs were monitored in Fukuoka, Japan by good time-resolved methods during the springtime. The highest monthly average $PM_{2.5}$ sulfate was found in May ($8.85{\mu}g\;m^{-3}$), followed by April ($8.36{\mu}g\;m^{-3}$), March ($8.13{\mu}g\;m^{-3}$), and June ($7.22{\mu}g\;m^{-3}$). The cases exceed the Japanese central government's safety standard for $PM_{2.5}$ ($35{\mu}g\;m^{-3}$) reached 10.11% during four months campaign. The fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ varied from 12.05% to 68.11% with average value of 35.49% throughout the entire period of monitoring. This high proportion of sulfate in $PM_{2.5}$ is an obvious characteristic of the ambient $PM_{2.5}$ in Fukuoka during the springtime. However, the average fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ in three rain events occurred during our intensive campaign fell right down to 15.53%. Unusually high $PM_{2.5}$ sulfate (> $30{\mu}g\;m^{-3}$) marked on three days were probably affected by the air parcels coming from the Chinese continent, the natural sulfur in the remote marine atmosphere, and a large number of ships sailing on the nearby sea. The theoretical number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ was originally calculated and then compared to $PM_{2.5}$ sulfate. A close resemblance between the diurnal variations of the theoretically calculated number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ and $PM_{2.5}$ sulfate concentration indicates that the secondary formed $(NH_4)_2SO_4$ was the primary form of sulfate in $PM_{2.5}$ during our monitoring period.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1045-1050
• /
• 2014

$N_2O$(Nitrous Oxide) is known as the third major GHG(Green House Gas) following $CO_2$(Carbon Oxide) and $CH_4$(Methane). The GWP(Global Warming Potential) factor of $N_2O$ is 310 times as large as that of $CO_2$ because $N_2O$ in the atmosphere is very stable, and it becomes a source of secondary contamination after photo-degradation in the stratosphere. Investigation on the cause of the $N_2O$ formation have been continuously reported by several researchers on power sources with continuous combustion form, such as a boiler. However, in the diesel engine, research on $N_2O$ generation which has effected from fuel components has not been conducted. Therefore, in this research, author has investigated about $N_2O$ emission rates which was changed by nitrogen and sulfur concentration in fuel on the diesel engine. The test engine was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of that was set up at a 75% load. Nitrogen and sulfur concentrations in fuel were raised by using six additives : nitrogen additives were Pyridine, Indole, Quinoline, Pyrrol and Propionitrile and sulfur additive was Di-tert-butyl-disulfide. In conclusion, diesel fuels containing nitrogen elements less than 0.5% did not affect $N_2O$ emissions in the all concentrations and kinds of the additive agent in the fuel. However, increasing of the sulfur additive in fuel increased $N_2O$ emission in exhaust gas.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.35-43
• /
• 2015

Purpose - This study aims to seek various plans to maintain the advancement of the overseas and domestic employment scenario through a case analysis of the Japanese industry, which maintains domestic employment while promoting the overseas advancement of companies despite having a similar industrial structure as Korea. The study further intends to derive insightful implications for Japanese manufacturing companies and government policies. Research design, data, and methodology - We selected four companies from the Japanese manufacturing industry. Being companies that were successful in increasing the domestic employment scenario while advancing in overseas markets. We utilized several secondary data sources including Japanese newspapers and report literature. Results - Previous studies have shown a negative relationship between Foreign Direct Investment (FDI) or offshoring and domestic employment. However, our results showed this relationship with respect to the Japanese manufacturing industry as follows: 1. FDI for developing overseas markets does not decrease domestic production. If Japanese companies change their strategy from exports to overseas production, there will be a consequent decrease in domestic employment of Multinational Enterprises (MNEs). However, the local production that plans the sales expansion of a foreign market does not substitute domestic production. 2. Several case studies illustrate that, as the production of final goods is expanded in foreign countries, there is a corresponding increase in the export of intermediary goods from Japan. In this case, if the production process of Japanese companies is promoted in foreign markets, the amount of exported material and parts from Japan will consequently increase. 3. It is difficult to consider that the establishment of subsidiary companies in foreign countries by manufacturing companies for wholesale, retail, and services decreases domestic employment. This is because the international development of these industries needs expatriates, expatriate training organizations, and research and development (R&D) activities. 4. When there is overseas demand, the growth of local management activities is expected to increase the work of the overseas business department in the head office in Japan, if competitiveness can be secured for better localization and management speed. 5. The conversion of the domestic manufacturing industry into high value-added production is necessary. The relocation of domestic production to foreign markets decreases domestic employment. To prevent this, the upgradation of domestic production bases, including high value-added production, and R&D capability need to be strengthened. Technology-based companies must develop new technology, patents, processes, and so forth, which require extensive human resources for R&D. Conclusions - Domestic medium-sized companies that are capable of consistently supplying high value-added products should be actively encouraged to deploy into and develop overseas markets. Further, this paper considers the necessity of a guidance policy that provides suggestions for overseas deployment, by the initiation of the government, to companies that cannot do so due to the lack of foreign experience or decisions by the CEO, despite having the relevant capability and technologies to supply high value-added products.