• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.520-529
• /
• 2015

The ambient $PM_{2.5}$ samples were collected by $PM_{2.5}$ sampler from September 2010 to December 2012 at Daegu University, Gyeongsan. A total of 260 samples were collected and 27 species were analyzed by inductively coupled plasma, ion chromatography, and thermal optical reflectance methods. Factor analysis identified four sources such as biomass burning source/secondary aerosol source, soil source, industry source, and incinerator source/mobile source. Also, backward trajectories were calculated using HYSPLIT 4 (Hybrid single-particle lagrangian integrated trajectory) model and PSCF (Potential source contribution function) model was applied to identify the possible source locations of carbonaceous species and water soluble ions species. PSCF results showed that the possible source locations of most chemical constituents measured in Gyeongsan were the industrial areas in the eastern coast of China, northeast regions of China, the Gobi Desert, and east sea of Korea.

• Natural Product Sciences
• /
• v.26 no.1
• /
• pp.10-27
• /
• 2020

Endophytes are defined as microorganisms that spend part of lifetime interior of plant tissues without causing negative effects. They have been used for agricultural purpose, biofuel production, bioremediation, medication, etc. In particular, endophytes have been emerged as a good source for bioactive secondary metabolites. A large number of secondary metabolites are currently being reported. In this report, we focus on the secondary metabolites that were originated from endophytic fungi inhabiting medicinal plants. They were classified into several groups such as nitrogenous compounds, steroids, sulfide-containing metabolites, terpenoids, polyketides, and miscellaneous for discussion of chemical structures and biological activities.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.110-120
• /
• 2014

This article proposes a spectrum sharing method which can avoid the mutual interference in both primary and secondary systems. The two systems make them a priority to use two single-dimension orthogonal signals, the real and imaginary pulse amplitude modulation signals, if the primary system is not in outage with this use. A secondary transmitter is selected to be the primary relay and the active secondary source to perform this. This allows a simultaneous spectrum access without any mutual interference. Otherwise, the primary system attempts to use a full two-dimensional signal, the quadrature amplitude modulation signal. If there is no outage with respect to this use, the secondary spectrum access is not allowed. When both of the previous attempts fail, the secondary system is allowed to freely use the spectrum two whole time slots. The analysis and simulation are provided to analyze the outage performance and they validate the considerable improvement of the proposed method as compared to the conventional one.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.924-944
• /
• 2014

This paper investigates the power allocation and outage performance of MIMO full-duplex relaying (MFDR), based on orthogonal space-time block codes (OSTBC), in cognitive radio systems. OSTBC transmission is used as a simple means to achieve multi-antenna diversity gain. Cognitive MFDR systems not only have the advantage of increasing spectral efficiency through spectrum sharing, but they can also extend coverage through the use of relays. In cognitive MFDR systems, the primary user experiences interference from the secondary source and relay simultaneously, owing to full duplexing. It is therefore necessary to optimize the transmission powers at the secondary source and relay. In this paper, we propose an optimal power allocation (OPA) scheme based on minimizing the outage probability in cognitive MFDR systems. We also analyse the outage probability of the secondary user in noise-limited and interference-limited environments in Nakagami-m fading channels. Simulation results show that the proposed schemes achieve performance improvements in terms of reducing outage probability.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.3
• /
• pp.200-209
• /
• 2017

In this paper, we investigate the tradeoff between security and reliability for a multi-hop protocol in cluster-based underlay cognitive radio networks. In the proposed protocol, a secondary source communicates with a secondary destination via the multi-hop relay method in the presence of a secondary eavesdropper. To enhance system performance under the joint impact of interference constraint required by multiple primary users and hardware impairments, the best relay node is selected at each hop to relay the source data to the destination. Moreover, the destination is equipped with multiple antennas and employs a selection combining (SC) technique to combine the received data. We derive closed-form expressions of the intercept probability (IP) for the eavesdropping links and the outage probability (OP) for the data links over a Rayleigh fading channel. Finally, the correction of our derivations is verified by Monte-Carlo simulations.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.201-207
• /
• 2000

The freshwater green alga Chlorococcum sp. grew on NH_4^{+},{\;}NO_3^{-}$, urea, yeast extract, and peptone as the nitrogen source showing similar pattens of growth and secondary carotenoid (SC) production. However, the most suitable nitrogen source for the induction fo SC was urea. The dffects of nutrient levels (urea, phosphate, sulfate, ferrous iron, and salt) on growth and SC production were stydied by varying the concentration of each nutrient in batch cultures. High biomass production was achieved in cultures containing 20-28 mM urea, 4.8-10 mM phosphate, 1.6 mM sulfate, 70 mM phosphate, 1.6 mM sulfate, 170 mM NACl, and $50{\;}\mu\textrm{M}$ iron. The optimum concentrations of nutrients for biomass and for the SC accumulation in biomass were evaluated and the two media for achieving high biomass production and SC production were thus developed. The extent to which each parameter to stimulate the formation of SC in the alga were varied and the potentially improned SC prodution by manipulating the nutrient levels in the modified media were descussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.3
• /
• pp.251-260
• /
• 2009

In this paper, we studied on an attenuation effect of automobile exhaust noise according to the direction of canceling speaker in ANC system. Automobile exhaust noise was recorded at 800 rpm, 3500 rpm and 5000 rpm of a diesel engine. Directions of canceling speaker can be set to $30^{\circ}$, $90^{\circ}$ and $150^{\circ}$ against the primary noise flow by acrylic ducts to be made for the experimentation. DSP board with TMS320C6416 chip of Texas Instrument Co. used to control the ANC system. The algorithm of this ANC system applied the Filtered-x-LMS algorithm that is modified to compensate for a property of DSP input signal and the secondary-path effect. As an experiment result, the direction of canceling speaker was proved to influence the reduction effect of noise. The $150^{\circ}$ duct in the attenuation effect of noise showed a better result than the $90^{\circ}$ or $30^{\circ}$ duct.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.143.1-143.1
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz, and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWT of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system optimized at higher refrigerant charge amount conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.927-930
• /
• 2004

We report on a new type of a flat and thin display with a secondary emission electron source. In this display device electrons are multiplied between two secondary emission plates under a high frequency electric field. This principle has a few important advantages over a field emission display: the emission comes from flat plates, which reduces the life-time problems of ion bombardment of field emitter tips. Furthermore, the electron emission is space charge limited which gives a uniform electron distribution. The electrons are extracted from the source and accelerated to a phosphor screen to generate light. Gray levels are made by pulse width modulation.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.880-883
• /
• 1996

Plasma Source Ion Implantation (PSII) technique was used for the hydrophilization or hydrophobization of polymer surfaces. Polymers were modified with different plasma gases such as oxygen, nitrogen, argon, and tetrafluoromethane, and for varying lengths of treatment time. Plasma ion treatment of oxygen, nitrogen, argon and their mixtures increased significantly the hydrophilic properties of polymer surfaces. More hydrophobic surfaces of polymers were formed after the treatment with tetrafluoromethane. A study of plasma source ion implanted polymers was performed using contact angle measurements and Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The TOF-SIMS spectra and depth profile were used to obtain the information about the treated surfaces of polymers. The permanence of this technique could be evaluated with respect to ageing time. The surfaces treated with PSII gave better stability than other surface modification methods.