• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1254-1266
• /
• 2024

This study investigates the application of supercritical carbon dioxide (S-CO₂) direct-cycle micro modular reactors (MMRs) in primary frequency control (PFC), which is a scenario characterized by significant load fluctuations that has received less attention compared to secondary load-following. Using a modified GAMMA + code and a deep neural network-based turbomachinery off-design model, the authors conducted an analysis to assess the behavior of the reactor core and fluid system under different PFC scenarios. The results indicate that the acceptable range for sudden relative electricity output (REO) fluctuations is approximately 20%p which aligns with the performance of combined-cycle gas turbines (CCGTs) and open-cycle gas turbines (OCGTs). In S-CO₂ direct-cycle MMRs, the control of the core operates passively within the operational range by managing coolant density through inventory control. However, when PFC exceeds 35%p, system control failure is observed, suggesting the need for improved control strategies. These findings affirm the potential of S-CO₂ direct-cycle MMRs in PFC operations, representing an advancement in the management of grid fluctuations while ensuring reliable and carbon-free power generation.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4181-4190
• /
• 2023

Nuclear power plants are subjected to various processes during decommissioning, including cutting, decontamination, disposal, and treatment. The cutting of massive bio-shields is a significant step in the decommissioning process. Cutting is performed near the target structure, and during this process, workers are exposed to potential radioactive elements. However, studies considering worker exposure management during such cutting operations are limited. Furthermore, dismantling a nuclear power plant under certain circumstances may result in the unnecessary radiation exposure of workers and an increase in secondary waste generation. In this study, a cutting scenario was formulated considering the bio-shield as a representative structure. The specifications of a standard South Korean radioactive waste disposal drum were used as the basic conditions. Additionally, we explored the hot-to-cold and cold-to-hot methods, with and without the application of polishing during decontamination. For evaluating various scenarios, different cutting time points up to 30 years after permanent shutdown were considered, and cutting speeds of 1-10nullm²/h were applied to account for the variability and uncertainty attributable to the design output and specifications. The obtained results provide fundamental guidelines for establishing cutting methods suitable for large structures.

• Archives of Reconstructive Microsurgery
• /
• 제20권1호
• /
• pp.32-37
• /
• 2011

Purpose: Canalicular laceration is relatively common due to its exposed, vulnerable location in case of facial trauma. Conjunctivodacryocystorhinostomy has been the standard treatment for canalicular obstruction secondary to unrepaired canalicular laceration. In spite of a high rate of relieving tear-duct obstruction, this method is noted to be associated with low rate of patient satisfaction and a number of complications. The goal of this study is to report the good results of delayed lacrimal stent implantation with Mini Monoka$^{(R)}$ for patients whose canaliculi were not repaired by initial surgery. Methods: From May of 2005 to February of 2007, four patients who underwent delayed lacrimal stent implantation using Mini Monoka$^{(R)}$ in canalicular laceration were retrospectively reviewed. First, the previous scar incision was made over the lower lid and we identified the cut end of proximal lacerated canaliculus. The Mini Monoka$^{(R)}$ was passed through the punctum to the cut end of the proximal lacerated canaliculus. We identified the cut end of the distal lacerated canaliculus, whose cut end has rolled white edges after careful excision of the scarred lid tissue. We then passed Mini Monoka$^{(R)}$ through the lacerated inferior canaliculus. Using an operating microscope, we placed three interrupted sutures of 8-0 Ethilon to join the canalicular ends. Silicone stent was left in place for 6 months. The mean age of the patients was 48.5 years (range, 35 to 59 years). The time interval from initial trauma to delayed lacrimal stent implantation was between 3 and 31 days. Follow-up periods ranged from 12 and 20 months. Results: The results of reconstruction were classified into normal, fair and poor. Patent lacrimal drainage systems were achieved in three of the four cases. In one case, epiphora was encountered. No cases of stent displacement, conjunctivitis or granuloma formation were encountered. Conclusion: Even though canalicular reconstruction was delayed for a long time, attempting canalicular reconstruction would be acceptable before considering secondary operations like dacryocystorhinostomy and conjunctivodacryocystorhinostomy.

• Archives of Plastic Surgery
• /
• 제32권1호
• /
• pp.76-84
• /
• 2005

Immediate breast reconstruction in breast cancer patients is universalized and now with a wide variety of methods to choose from, we can select a breast reconstruction method according to the patient's condition. Among these methods, immediate breast reconstruction with TRAM free flap is the most commonly used. Nipple reconstruction is usually performed as a secondary procedure, reconstructed. Nipple is reconstructed with contralateral nipple composite graft or with local flap. Areola is reconstructed with skin graft and tattooing. Therefore, to reconstruct complete breast, two or more staged operations are needed and are troublesome to both the surgeon and the patient. If we could reconstruct breast mound and nipple at same time, we would reduce the operative stages and heighten the patient's satisfaction. The author performed delayed or immediate breast reconstruction with TRAM free flap and nipple reconstruction at the same time. If the TRAM flap was to situate in the whole of the breast or at the center of the breast mound, nipple was reconstructed with a local flap from the TRAM flap. If the TRAM flap was not situated in center of breast mound, nipple was reconstructed with a local flap from remnant breast skin. Immediate nipple reconstructions in breast reconstruction consisted total of 22 cases. Among these, delayed breast reconstruction were 5 cases and immediate breast reconstruction were 17 cases. According to patient's condition and mastectomy method, nipple reconstruction method was selected; nipple reconstruction with contralateral nipple composite graft(3 cases); nipple reconstruction with remnant breast skin(6 cases); nipple reconstruction from flap margin(10 cases); nipple reconstruction with prefabricated nipple on flap(3 cases). Malposition of the reconstructed nipple was the most common and serious complication(6 cases). The other complications were atrophy of the nipple(1 case), and necrosis(1 case). Reconstruction of the breast and nipple at the same time can reduce the need of a secondary operation and use remnant skin or redundant flap tissue maximally. On the other hand, it must be considered that position and shape of nipple could be deformed, because the nipple reconstruction is performed before the shape of reconstructed breast settles completely. Prudent attention is needed, because the danger of complication is higher than delayed nipple reconstruction.

• 한국지구과학회지
• /
• 제45권3호
• /
• pp.173-191
• /
• 2024

태풍은 지구 시스템 내의 해양-대기-육상 상호작용을 일으키는 매우 중요한 현상으로 특히 태풍의 특성 인자 중 하나인 풍속은 중심 기압, 이동 경로, 해수면 온도 등의 매개변수에 의해 복잡하게 변화하여 실제 관측 자료를 기반으로 이해하는 것이 중요하다. 2015 개정 교육과정 기반 중등학교 교과서에서 태풍 풍속은 본문 내용 및 삽화의 형태로 제시되고 있어 풍속에 대한 심층적 이해가 가능한 탐구활동이 무엇보다 필요한 실정이다. 본 연구에서는 교수-학습 과정에서 간단한 조작만으로도 태풍의 풍속을 이해할 수 있도록 그래픽 사용자 인터페이스(GUI)를 기반으로 한 데이터 시각화 프로그램을 개발하였다. 2023년 발생한 태풍 마와르, 구촐, 볼라벤의 천리안 위성 2A호 RGB (Red-Green-Blue)영상 자료를 입력 자료로 활용하였다. 태풍 주변의 구름 이동 좌표를 입력하여 태풍의 풍속을 산출하고 태풍 중심 기압, 폭풍 반경, 최대 풍속 등의 매개 변수를 입력하여 태풍 풍속 분포를 시각화 할 수 있도록 설계하였다. 본 연구에서 개발된 GUI 기반 프로그램은 천리안 위성 2A호로 관측 가능한 태풍에 대해 오류 없이 적용 가능하며 교과서의 시공간적 한계를 벗어난 실제 관측 자료 기반의 과학탐구활동이 가능하다. 학생과 교사는 별도의 유료 프로그램 및 전문적인 코딩 지식이 없어도 실제 관측 자료를 수집, 처리, 분석, 시각화하는 과정을 경험할 수 있으며, 이를 통해 미래 정보화 사회에서의 필수 역량인 디지털 소양을 함양시킬 수 있을 것으로 기대된다.

• Advances in pediatric surgery
• /
• 제10권1호
• /
• pp.1-8
• /
• 2004

A re-pull-through operation for Hirschsprung's disease is performed when the primary operation has failed because of the remnant or acquired aganglionosis, anastomotic stricture and/or fistula. The purpose of this study is to review our experience of the re-pull-through procedure for Hirschsprung's disease. From May 1978 to July 2003, 26 patients who underwent re-pull-through operations at the Department of Pediatric Surgery, Seoul National University Children's Hospital, were studied retrospectively by means of chart review as well as telephone interview. The mean age at primary operation and re-operation were llmonths (2 months - 10 years) and 43 months (1 year - 23 years 3 months), respectively. Initial operation for Hirschsprung's disease was Duhamel's procedure in 17, Swenson's in 6 and Soave's 3. Causes of failure of primary operation were remains of secondary aganglionic segment (n=23), vascular arcade injury (n= 1), rectoperineal fistula (n=2, due to mesenteric torsion and poor blood supply), Mean interval between the primary operation and the re-operation was 34 months (6 months-22 years). Reoperation methods were Soave's in 12, Duhamel's in 8, APSP (abdomino-posterosagittal pull-through procedure) in 5, and Swenson's in 1 case. In 2 cases of repeated rectoperineal fistula or rectourethral fistula, re-APSP were performed 3 times, respectively. A total of 29 re-pull-through operations were performed. Postoperative complications were wound infection (n=1), adhesive ileus (n=1), rectoperineal fistula (n=3), rectourethral fistula (n=2), and death due to pulmonary embolism (n=1). Mean follow up period of reoperation was 78 months (1 month-23years). In current state, 2 patients have an ileostomy because of repeated rectoperineal fistula and rectourethral fistula. Of the remaining 23 patients, 21(91 %) are totally continent with or without minimal soiling. Reoperation for Hirschsprung's disease was effective and safe for the patients complicated to the initial pull-through operation.

• Journal of Trauma and Injury
• /
• 제24권1호
• /
• pp.12-17
• /
• 2011

Purpose: A rib fracture secondary to blunt thoracic trauma continues to be an important injury with significant complications. Unfortunately, there are no definite treatment guidelines for severe multiple rib fractures. The purpose of this study was to evaluate the result of early operative stabilization and to find the risk factors of surgical fixation in patients with bilateral multiple rib fractures or flail segments. Methods: From December 2005 to December 2008, the medical records of all patients who underwent operative stabilization of ribs for severe multiple rib fractures were reviewed. We investigated patients' demographics, preoperative comorbidities, underlying lung disease, chest trauma, other associated injuries, number of surgical rib fixation, combined operations, perioperative ventilator support, and postoperative complications to find the factors affecting the mortality after surgical treatment. Results: The mean age of the 96 patients who underwent surgical stabilization for bilateral multiple rib fractures or flail segments was 56.7 years (range: 22 to 82 years), and the male-to-female ratio was 3.6:1. Among the 96 patients, 16 patients (16.7%) underwent reoperation under general or epidural anesthesia due to remaining fracture with severe displacement. The surgical mortality of severe multiple rib fractures was 8.3% (8/96), 7 of those 8 patients (87.5%) dying from acute respiratory distress syndrome or sepsis. And the other one patient expired from acute myocardial infarction. The risk factors affecting mortality were liver cirrhosis, chronic obstructive pulmonary disease, concomitant severe head or abdominal injuries, perioperative ventilator care, postoperative bleeding or pneumonia, and tracheostomy. However, age, number of fractured ribs, lung parenchymal injury, pulmonary contusion and combined operations were not significantly related to mortality. Conclusion: In the present study, surgical fixation of ribs could be carried out as a first-line therapeutic option for bilateral rib fractures or flail segments without significant complications if the risk factors associated with mortality were carefully considered. Furthermore, with a view of restoring pulmonary function, as well as chest wall configuration, early operative stabilization of the ribs is more helpful than conventional treatment for patients with severe multiple rib fractures.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• 한국산업융합학회 논문집
• /
• 제12권2호
• /
• pp.79-83
• /
• 2009

In this study, actual state of operation of rotary tillage was surveyed in the central part of Korea which includes 29 rural community around Asan city, Choongnam principal. 29 heads of the village and 44 farmers were surveyed at the field with a questionnaire on the operation of rotary tillage with farm tractors. Power requirement of rotary tillage operation was measured at the field of each farmers during rotary tilling operation in the central part of Korea. Summaries of this study are summarized as follows. 1) Operations of tillage and land preparation were found to be carried out with farm tractors by 98 percents which are results of the survey on 29 heads of the village and 44 farmers. 2) More than half of the farms had tractors with horsepower more than 38 kW which states that most tractors were supplied in middle and large size. 3) The case of applying secondary tillage after the first primary tillage were 79 percent among the most of operations of tillage and field preparation. Rotary tillage were carried out on the most of wet paddy fields and only 14 percent of dry fields were cultivated with rotary tillage. 4) 63.6 percent of farm tractors were surveyed to meet the recommended field capacity on tillage operation by the government which were ranged from 15.1 to 34.9 ha. And the field capacity of these farm tractors were greater than that of annual total area of operation field, 13.2ha (data from Information of agricultural machinery, National agricultural products quality service, Korea), which states the utilization of agricultural machinery was high in the area surveyed. 5) 46 percent of farmers changed the blade of rotary implement when they used it over the field capacity of rotary blade of 33 ha which is the area of field for rotary operation per a blade change. 55 percent of farmers changed the rotary blade more than once per two years. 6) The required power for rotary operation of each farm tractors were measured as 17.206 kW at untilled paddy field and 34.989 kW at untilled dry field on the average, respectively. The required power for rotary operation was measured as 28.248 kW on the average at the paddy field which had been plowed once and 28.015 at the paddy field that had rotary tillage operation. Untilled dry field showed the highest value of the required power for rotary operation.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제25권3호
• /
• pp.251-278
• /
• 2022

본 연구의 목적은 한국, 일본, 싱가포르, 핀란드의 초등 수학교과서의 소수의 곱셈과 나눗셈에 대하여 어떻게 제시하고 있는지 분석하여 수학교육을 위한 시사점을 얻고자 하는 것이다. 소수의 곱셈과 나눗셈은 학생들이 자주 오개념을 가지는 것에 비하여 이를 표현하는 최근 초등 수학교과서의 비교 연구는 많지 않았다. 이 연구를 위하여 한국의 초등 수학교과서와 TIMSS나 PISA와 같은 국제성취도 연구에서 높은 수학 성취도를 나타내는 일본, 싱가포르, 핀란드에서 널리 사용하는 초등 수학교과서를 선정하였다. 분석은 소수의 곱셈과 나눗셈과 관련한 초등 수학과 교육과정, 지도 시기와 내용, 실생활 소재, 시각적 모델의 사용, 알고리즘의 형식화 방법의 관점에서 살펴보았다. 연구 결과, 소수의 곱셈과 나눗셈 관련 수학과 교육과정은 한국과 핀란드의 경우 어림을 포함하고, 일본과 싱가포르는 실생활 연계를 보다 강조하며 핀란드는 중등에서 연산이 완성되도록 하고 있다. 지도 시기와 내용은 짧은 기간에 집중적으로 지도하거나 여러 학년과 학기에 분산하기도 한다. 실생활의 소재는 모든 나라에서 간단한 문장제 형식으로 제시하였고, 시각적 모델의 사용이나 알고리즘의 형식화 방법은 단위 환산 등에서 자연수의 연산과 연계하도록 한다. 이러한 분석을 통해 교과서 개발 및 교사 연수에 제안을 하였다.