• 대한건축학회논문집:계획계
• /
• 제34권3호
• /
• pp.129-138
• /
• 2018

The purpose of this study is to analyze the daily living area of the elderly using the vast amount of travel route data collected through smart phones. In order to analyze the utilization status of the elderly into the visiting area and the living area, the subway station influence area was typed based on the number and ratio of the elderly visiting and the elderly living there. The characteristics of the elderly visiting area and the living area of the subway station area were derived by analyzing the walking route data for the three types of subway station influence areas where the elderly visit and live. First, we derive the range of visiting area and living area of the elderly near the subway station. Second, we derive the characteristic of moving distance which causes the linked walking of the elderly. Third, destination distribution and facility utilization are influenced by the subject of use, movement pattern, and facility awareness.

• 한국통신학회논문지
• /
• 제32권9C호
• /
• pp.888-894
• /
• 2007

The computational complexity of a sphere decoder (SD) is conventionally reduced by decoding order scheme which sorts candidate symbols in the ascending order of the Euclidean distance from the output of a zero-forcing (ZF) receiver. However, since the ZF output may not be a reliable sorting reference, we propose two types of sorting schemes to allow faster decoding. The first is to use the newly found lattice points in the previous search round instead of the ZF output (Type I). Since these lattice points are closer to the received signal than the ZF output, they can serve as a more reliable sorting reference for finding the maximum likelihood (ML) solution. The second sorting scheme is to sort candidate symbols in descending order according to the number of candidate symbols in the following layer, which are called child symbols (Type II). These two proposed sorting schemes can be combined with layer sorting for more complexity reduction. Through simulation, the Type I and Type II sorting schemes were found to provide 12% and 20% complexity reduction respectively over conventional sorting schemes. When they are combined with layer sorting, Type I and Type II provide an additional 10-15% complexity reduction while maintaining detection performance.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.399-414
• /
• 2020

A floating bridge is an innovative solution for deep-water and long-distance crossing. This paper presents a curved floating bridge's dynamic behaviors under the wind, wave, and current loads. Since the present curved bridge need not have mooring lines, its deep-water application can be more straightforward than conventional straight floating bridges with mooring lines. We solve the coupled interaction among the bridge girders, pontoons, and columns in the time-domain and to consider various load combinations to evaluate each force's contribution to overall dynamic responses. Discrete pontoons are uniformly spaced, and the pontoon's hydrodynamic coefficients and excitation forces are computed in the frequency domain by using the potential-theory-based 3D diffraction/radiation program. In the successive time-domain simulation, the Cummins equation is used for solving the pontoon's dynamics, and the bridge girders and columns are modeled by the beam theory and finite element formulation. Then, all the components are fully coupled to solve the fully-coupled equation of motion. Subsequently, the wet natural frequencies for various bending modes are identified. Then, the time histories and spectra of the girder's dynamic responses are presented and systematically analyzed. The second-order difference-frequency wave force and slowly-varying wind force may significantly affect the girder's lateral responses through resonance if the bridge's lateral bending stiffness is not sufficient. On the other hand, the first-order wave-frequency forces play a crucial role in the vertical responses.

• 대한교통학회지
• /
• 제19권1호
• /
• pp.17-28
• /
• 2001

본 연구의 목적은 기업과 소비자간 전자상거래에서 물류운송체계의 물류비용을 상품운송 유형에 따라 분석하는 것이다. 먼저 물류운송체계를 3가지 유형 즉, 공급업체에서 소비자에게 직송하는 방법(유형 I), 자가물류업체를 통해 각 권역에 운송센타를 두어 운송하는 방법(유형 II), 3자 물류업체에게 운송에 관한 모든 일체를 위임하는 방법(유형 III)으로 분류하고 각 유형의 물류비 항목을 운송비, 보관비, 물류정보비로 구성하였다. 전자상거래에서의 물류는 다품종 소량 다빈도 특성을 가지고 있고, 주문특성 및 상황에 따라 소요물류비용이 변한다. 그러므로 본 연구에서는 대상권역의 주문에 대한 1일 주문건수 운송거리, 운송량, 그리고 1일 배정화물트럭대수에 따라 변하는 물류비용함수를 도출하였고, 가상네트웍을 구성하여 시뮬레이션 함으로서 각 운송유형의 주문특성에 따른 물류비용의 변화를 분석하였다. 하지만, 본 연구는 공급업체의 물류인프라와 운송서비스 시간에 대한 고려를 하지 않았기 때문에 현실에 적용하기에 한계가 있다. 만일 이에 대한 연구가 보충된다면 전자상거래에서 일정 단위기간 동안 상품운송에 소요되는 물류비를 좀더 정확히 추정하여 전자상거래에서의 효율적인 화물운송방안을 제시할 수 있을 것이다. 본 연구의 결과로 전자상거래에서의 1일 주문발생 빈도와 공급상품의 중량. 그리고 운송거리에 따라 변하는 물류비용을 추정할 수 있다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.289-293
• /
• 2008

본 연구에서는 하천에 유입된 오염물질의 거동 및 확산특성을 파악하기 위하여 실제 하천에서 RI(Radioactive Isotope) 추적자를 이용하여 오염물 확산을 실측하고 그 결과를 수치모형과 비교분석하였다. 연구대상 수로구간은 금강 상류지역의 용담댐 부근 남대천 합류지점으로부터 하류로 약 2km구간에서 실험을 하였으며, 수치모형으로는 RMA-2(Resource Modeling Associates), RMA-4를 사용하였다. RI를 이용한 현장실험은 모델링을 적용한 지역과 동일 지역에서 실험을 실시하였고, 각 구간의 간격은 1km로 정하되 현장 사정에 따라 차이를 조금 두어 RI계측기를 통한 1초간격의 농도 데이터를 계측하였다. 계측결과는 수치모형의 결과와 실제 하천에서의 확산범위 및 확산에 큰 영향을 미치는 확산계수 변화에 따른 농도 분포를 비교 분석하였다. 본 연구를 통해 확산계수가 하천의 오염전파에 미치는 영향과 실측된 농도 데이터를 통해 최초 및 최대농도 도달시간을 파악할 수 있었고, 이것으로 인하여 확산계수를 산정을 할 수 있는 기초자료를 마련하였다.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.51-63
• /
• 1994

Many themes have been studied for FMS problems. But most researches have focused on specific themes; Machine selection, Loading, Routing, Machine layout, etc. So many decision makers who want to introduce FMS to his factory, have many problems, because they do not know either what size of FMS should be introduced or what amount of money should be invested. The objective of this research is to help the decision makers who want to introduce FMS. This research consists of three major part, first, Machine selection, second, Loading, and third, Machine Layout. In the first part of the research, machines are selected with minimum cost satisfying the given demand of each part. In the second part, each operations with its required tools are allocated to those machines. In the third part the locations of each selected machines are determined. And dissimilarity coefficients between each pair of machines are calculated as the measure of distance. With above three steps, we have selected machines, allocated operations to those machines, and the layout configuration of those machines. And for each three steps, Mixed Integer Programming models are formulated. In order to solve the large problems and reduce the computer execution time, three heuristic algorithms are developed for the three mixed integer programming models.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.347-349
• /
• 1997

In this study, we designed a vascular occlusion device based on the principle that slowing blood flow would induce thrombosis. Tungsten, stainless steel and platinum were tested for finding a good embolic metallic coil. The primary coil and the second coil were done with heat treatment or different time. The pitch distance and the shape retention capability of second coil were characterized by SEM. To increase thrombogenicity, we tried to treat different proteins on steel coils: thrombin, gelatin and both gelatin and thrombin. To verify protein materials treated on coils, the surface of coil treated with different proteins were characterized using Laser Raman Spectrophotometer. After observation of embolic coils, the peptides bonds on theirs' surface were found. In order to compare the thrombogenicity of different embolic agents, we measured whole blood clotting time.

• 한국재난정보학회 논문집
• /
• 제8권1호
• /
• pp.71-80
• /
• 2012

민방위 대피시설의 용량기준을 바탕으로 정량적인 분석을 통해 대피시설 선정시 지침이 될 수 있는 기준을 마련하는 것이 필요하다. 본 연구의 목적은 인구밀도 및 분포에 따른 대피시설의 수용 용량 및 배치 현황을 평가하는 것이다. 본 연구의 결과는 다음과 같다. 첫째, 정확한 대피시설의 권역을 설정하기 위해서는 대피시설의 수용인원을 고려해야할 필요가 있다. 둘째, 대상 지역별 대피 현황을 정량적으로 비교할 수 있는 근거 자료를 산출하였다. 셋째, 최단거리 이동을 불가능하게 하는 지형적 조건을 고려할 필요가 있음을 밝혔다. 넷째, 현실성 있는 모델을 작성하기 위해서는 보다 다양한 변수들을 고려한 모델을 설정할 필요가 있음이 드러났다.

• 한국항행학회논문지
• /
• 제23권4호
• /
• pp.265-272
• /
• 2019

본 논문에서는 우리나라에서 가장 교통이 혼잡한 수도권에서의 출퇴근 시나리오를 선정하고, 미국연방항공국에서 개발한 AEDT (aviation environmental design tool) 소트프웨어를 사용하여 PAV (personal air vehicle) 운용 시 발생하는 소음분석을 수행하였다. 미항공우주국에서 선보인 ODM (on-demand mobility) 개념에서 PAV를 운용하기 위한 안전성 다음으로 소음이 중요한 고려요소이다. PAV의 정확한 NPD (noise power distance) 데이터가 공개되어 있지 않는 문제를 해결하고자 eVTOL (electric vertical take off and landing) PAV와 같은 저소음 PAV를 민간용 헬리콥터로 모델링하여 소음 분석을 수행하고, 해당지역의 주거 적합성을 예측하였다. 전기추진과 같은 소음 감소 기술의 적용은 소음 노출 레벨을큰 폭으로 감소시켰고, 수도권내에서 소음문제 없이 PAV를 이용한 출퇴근이 실현 가능하다는 결론에 도달하였다.

• 도시과학
• /
• 제6권2호
• /
• pp.29-34
• /
• 2017

Although the supply of public parking lots in major cities is steadily increasing, there is still a shortage of parking spaces that take into account the characteristics of actual available parking spaces. These parking problems are caused by conflicts between users, illegal occupation and privatization of roads, interference with traffic roads, and business stagnation in commercial areas and illegal parking problems. In addition, despite various parking demand management policies and continuous supply of public parking facilities, the solution to the parking problem is uneasy due to increased construction costs and changes in social conditions. In order to solve this problem, it was judged that it would be necessary to utilize the existing public parking lots efficiently. Therefore, we collect the variables expected to affect the turnover, and use multiple regression models. The results are summarized as follows. Firstly, public parking lots can be classified into four types using utilization rate and turnover rate. Secondly, influencing factors are found including index of public transportation usage convenience, index of illegal parking, and land use characteristics in central commercial district. Thirdly, it was shown that there was little impact by the size of public parking lots, separation distance to subway distance, separation distance to bus stops, transfer zone, residential zone, and second-rated lots by parking costs. Finally, it is found that public parking lots can be improved by proving accessibility of public transit, enforcement of illegal parking, active approaches supporting public parking lots. It is also recommended that public parking cost rating system based mainly on land use characteristics should be remedied and rearranged.