• 한국콘텐츠학회논문지
• /
• 제9권1호
• /
• pp.400-406
• /
• 2009

본 연구에서는 하천에 유입된 오염물질의 거동 및 확산 특성을 파악하기 위하여 실제 하천에서 RI(Radioactive Isotope) 추적자를 이용하여 오염물 확산을 실측하고 그 결과를 수치모형과 비교분석하였다. 연구대상 수로구간은 금강 상류지역의 용담댐 부근 합류지점으로부터 하류로 약 2km구간에서 실험을 하였으며, 수치모형으로는 RMA-2(Resource Modeling Associates-2), RMA-4를 사용하였다. RI를 이용한 현장실험은 모델링을 적용한 지역과 동일 지역에서 실험을 실시하였고, 각 구간의 간격은 1km로 정하되 현장 사정에 따라 차이를 조금 두어 RI계측기인 NaI계측기를 통한 1초 간격의 농도 데이터를 계측하였다. 계측결과는 수치모형의 결과와 실제 하천에서의 확산범위 및 확산에 큰 영향을 미치는 확산계수 변화에 따른 농도 분포를 비교 분석하였다.

• 국제물리치료학회지
• /
• 제6권1호
• /
• pp.824-827
• /
• 2015

The purpose of this study was to investigate the effects of joint position on the distraction distance in patients with adhesive capsulitis of glenohumeral joint. The study was conducted upon 20 adults in their 40's with the findings of adhesive capsulitis of glenohumeral joint. These subjects were subdivided into 3 groups, which were a group with neutral position(n=7), second group with resting position(n=7) and third group with end-range position(n=6). After having the subject wearing sleeveless shirts exposing armpit and lying straight on the plinth, a physical therapist with OMT qualification pulled glenohumeral joint at the Grade III of Kaltenborn-Evjenth traction; and the distance between glenoid fossa and humeral head was measured with ultrasound. Following the application of traction, the group with resting position($.67{\pm}0.29$) exhibited the longest distance between humeral head and glenoid fossa, and it was followed by neutral position($.50{\pm}0.25$) and end-range position($.35{\pm}.21$) in this order. From the comparison of these groups, there was no significant difference in distraction distance between resting position and neutral position; and there was again no significant difference in distraction distance between end-range position and neutral position. However, there was a significant difference in distraction distance between end-range position and resting position(p<.05). Upon application of the Grade III of Kaltenborn-Evjenth traction, it was evident that the distance between humeral head and glenoid fossa can be varied depending on the location of the joint.

• Steel and Composite Structures
• /
• 제5권2_3호
• /
• pp.181-192
• /
• 2005

The effective length method for flexural (column) buckling has been used for many decades but its use is somewhat limited in various contemporary design codes to moderately slender structures with elastic critical load factor (${\lambda}_{cr}$) less than 3 to 5. In pace with the use of higher grade steel in recent years, the influence of buckling in axial buckling resistance of a column becomes more important and the over-simplified assumption of effective length factor can lead to an unsafe, an uneconomical or a both unsafe and uneconomical solution when some members are over-designed while key elements are under-designed. Effective length should not normally be taken as the distance between nodes multiplied by an arbitrary factor like 0.85, 1.0, 2.0 etc. Further, the classification of non-sway and sway-sensitive frames makes the conventional design procedure tedious to use and, more importantly, limited to simple regular frames. This paper describes the practical use of second-order analysis with section capacity check allowing for $P-{\delta}$ and $P-{\Delta}$ effects together with member and system imperfections. Most commercial software considers only the $P-{\Delta}$ effect, but not member and frame imperfections nor $P-{\delta}$ effect, and engineers must be very careful in their uses. A verification problem is also given for validation of software for this type of powerful second-order analysis and design. It is a trend for popular and advanced national design codes in using the second-order analysis as a norm for analysis and design of steel structures while linear analysis may only be used in very simple structures.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.160-176
• /
• 2017

The interaction of focused wave groups with a vertical wall is investigated based on the second order potential theory. The NewWave theory, which represents the most probable surface elevation under a large crest, is adopted. The analytical solutions of the surface elevation, velocity potential and wave force exerted on the vertical wall are derived, up to the second order. Then, a parametric study is made on the interaction between nonlinear focused wave groups and a vertical wall by considering the effects of angles of incidence, wave steepness, focal positions, water depth, frequency bandwidth and the peak lifting factor. Results show that the wave force on the vertical wall for obliquely-incident wave groups is larger than that for normally-incident waves. The normalized peak crest of wave forces reduces with the increase of wave steepness. With the increase of the distance of focal positions from the vertical wall, the peak crest of surface elevation, although fluctuates, decreases gradually. Both the normalized peak crest and adjacent crest and trough of wave forces become larger for shallower water depth. For focused wave groups reflected by a vertical wall, the frequency bandwidth has little effects on the peak crest of wave elevation or forces, but the adjacent crest and trough become smaller for larger frequency bandwidth. There is no significant change of the peak crest and adjacent trough of surface elevation and wave forces for variation of the peak lifting factor. However, the adjacent crest increases with the increase of the peak lifting factor.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.483-494
• /
• 1996

In this paper, we proposed the receive decoder and Virterbi algorithm with sliding multiple symbol detection using MLSE. the informationis transmitted by the phase difference of the adjacent channel signal at the .pi./4 shift QPSK. In order to apply the .pi./4 shift QPSK to TCM, we use the signal set expansion and the signal set partition by the phase differences. And the Viterbi decoder containing branch mertrice of the squared Euclidean distance of the first, second and Lth order phase difference is introduced in order to extract the information in the differential detection of the Trellis-Coded .pi./4 shift QPSK. The proposed Viterbi decoder and receiver are conceptually same to the sliding multiple symbol detection method using the MLSE. By uisng this method, the study shows that the Trellis-Coded .pi./4 shift QPSK is an attractive scheme for the power and the bandimited systems while also improving the BER performance when the Viterbi decoder is employed to the Lth order phase difference metrics.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제1권1호
• /
• pp.29-33
• /
• 1994

There are various aspects of the solution of boundary-value problems for second-order linear elliptic equations in two independent variables. One useful method of solving such boundary-value problems for Laplace's equation is by means of suitable integral representations of solutions and these representations are obtained most directly in terms of particular singular solutions, termed Green's functions.(omitted)

• 말소리와 음성과학
• /
• 제5권4호
• /
• pp.99-107
• /
• 2013

The purpose of this study is to examine the relative distances among English front vowels in a message produced by 47 Korean and American speakers in order to better instruct pronunciation skills of English vowels for Korean English learners. A Praat script was developed to collect the first and second formant values(F1 and F2) of eight words in each sound file which was recorded from an internet speech archive. Then, the Euclidean distances were measured between the three vowel pairs: [i-ɛ], [i-ɪ], and [ɛ-æ]. The first vowel pair [i-ɛ] was set as the reference from which the relative distances of the other two vowel pairs were measured in percent in order to compare the vowel sounds among speakers of different vocal tract lengths. Results show that F1 values of the front vowels produced by the Korean and American speakers increased from the high front vowel to the low front vowel wih differences among the groups. The Korean speakers generally produced the front vowels with smaller jaw openings than the American speakers did. Secondly, the relative distance of the high front vowel pair [i-ɪ] showed a significant difference between the Korean and American speakers while that of the low front vowel pair [ɛ-æ] showed a non-significant difference. Finally, the Korean speakers in the higher proficiency level produced front vowels with higher F1 values than those in the lower proficiency level. The author concluded that Korean speakers should produce the front high vowels distinctively by securing sufficient relative distance of the formant values. Further studies would be desirable to examine how strong the Korean speakers' English proficiency correlate with the relative distance of target words of comparable productions.

• 한국지능시스템학회논문지
• /
• 제12권6호
• /
• pp.524-530
• /
• 2002

본 연구에서는 Sugeno-type 퍼지시스템을 이용하여 계단형 퍼지 이동 슬라이딩 평면을 구성하고 이를 이용한 슬라이딩 모드제어방식을 제안한다 이 퍼지시스템은 위상평면 상에서 상태오차벡터가 이루는 각도와 원점과의 거리를 입력으로 가지며 출력으로 1차 선형방정식을 갖는다. 이 퍼지 슬라이딩 평면을 이용하여 초기 상태를 이 평면상에 위치시키고 이 슬라이딩 평면을 회전시키거나 이동시킴으로써 도달시간을 줄이고 추적시간을 줄인다. 제안된 이동 슬라이딩 평면은 개념적으로 계단형의 이산적인 형태를 가지지만 이 평면이 퍼지시스템으로 구성되기 때문에 연속으로 이동하는 특징을 나타낸다. 제안된 퍼지 슬라이딩 평면에 대한 슬라이딩 모드의 동특성이 안정함을 증명하며 이를 2차 예제시스템을 이용하여 그 타당성을 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.505-508
• /
• 2003

The current paper proposes a new vertex selection scheme for polygon-based contour ceding. To efficiently characterize the shape of an object, we incorporate the curvature information in addition to the conventional maximum distance criterion in vertex selection process. The proposed method consists of “two-step procedure.” At first, contour pixels of high curvature value are selected as key vertices based on the curvature scale space (CSS), thereby dividing an overall contour into several contour-segments. Each segment is considered as an open contour whose end points are two consecutive key vertices and is processed independently. In the second step, vertices for each contour segment are selected using progressive vertex selection (PVS) method in order to obtain minimum number of vertices under the given maximum distance criterion ( $D_{MAX}$). Experimental results are presented to compare the approximation performances of the proposed and conventional methods.s.

• 산업공학
• /
• 제18권4호
• /
• pp.485-493
• /
• 2005

In this study, a method that can objectively and systematically design the layout of user interface components was developed. In order to explain its application method, the method was applied to the layout design of facsimile. In particular, in order to validate the suitability of the method, comparison tests were performed for the case of facsimile. Computer simulators for layout design were made using Micromedia Flash and comparison evaluation for an existing layout and a new layout was performed in three aspects. The first comparison method was to measure and compare its movement distance when carrying out a task in two layout models. The second one was to measure and compare users' performance. The last one was to measure and compare users' subjective satisfaction after using two models. As the result, new layout design was better than the existing design in all comparison tests. The movement distance of the new layout design model was shorter than the existing model. And, its performance including task completion time and error frequency was better and users' satisfaction was higher than the existing. In conclusion, the method that was developed in this study can be very effectively used in the layout design of user interface components.