• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.129-139
• /
• 2008

콘크리트 구조물의 내구성 해석 변수들의 변동성과 불확실성으로 인해 확률론적인 접근법의 사용이 증가되어 왔다. 특히, 몬테칼로시뮬레이션 방법(Level III 방법)은 접근성의 용이함으로 인해 많은 내구신뢰성 해석에 사용되어왔지만, 결과를 얻기위해서는 수 십만번의 반복계산이 필요하다. Level II 수준의 신뢰성 해석법인 일계이차모멘트법(FOSM)은 MCS법과 비교할 수 없을 정도의 짧은 시간에 신뢰도지수나 파괴확률을 계산할 수 있어, 유효성만 검증된다면 편리성과 신속성으로 인해 폭넓은 사용이 가능할 것이다. 본 연구에서는 FOSM법과 MCS법에 의한 부식확률(내구성 파괴확률)을 서로 비교하여 FOSM법의 유효성을 검증하고 각 내구성 해석변수들의 변동성이 부식확률에 미치는 영향을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.382-392
• /
• 2004

The usage of constant velocity (CV) joint is effective for motorboats on gliding regime of the motion. During transition on the gliding when angle of the CV differs from null on driving and driven composite shafts there are moments of the second order. Excitation of oscillations of the second order moments occurs when driving shafts transmits a variable torque. which generates through CV joint a lateral moment acting on the bearing. As a result of oscillations from a resonating harmonic of a shafting the harmonic with the greater or periodically varying amplitude for power condition trough transferring to nominal power 144kW. Beating conditions coincide with third mode having frequency 45.486 Hz. In that case there is high increasing of the equivalent stresses. The forming of the stiffness of the composite material is concerned to use most orientation of the layer angle in the range of $\pm$60 degrees relatively of shaft axis. Application of that angles for layer orientation gives possibility to avoid high disturbance of the shafting for motorboat transition regime.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.447-453
• /
• 2010

Response-based approach is getting more preferred in determining the design sea-state for offshore structures because traditional environment-based approach is known to yield a much conservative design condition. This paper introduces the inverse first-order second-moment (IFOSM) method as a response-based approach, which is expected to give a more feasible design condition at the cost of reasonable number of motion analyses. The IFOSM method is based on the theory of probability and adopts an optimization scheme to determine the design point. Both the design maximum response and design sea state can be obtained straightforwardly from the optimum. The IFOSM method has been applied to a turret-moored FPSO's design problem and showed its effectiveness in practical use.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.555-569
• /
• 1998

The reliability of antenna tower designed for a n-year design wind speed is determined by considering the variability of the strength of the component members and of the mean wind speed. For obtaining the n-year design wind speed, maximum annual wind speed is assumed to follow Gumbel Type-1 distribution. Following this distribution of the wind speed, the mean and standard deviation of stresses in each component member are worked out. The variability of the strength of members is defined by means of the nominal strength and a coefficient of variation. The probability of failure of the critical members of tower is determined by the first order second moment method (FOSM) of reliability analysis. Using the above method, the reliability against allowable stress failure of the critical members as well as the system reliabilities for a 75 m tall antenna tower, designed for n-year design wind speed, are presented.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.205-224
• /
• 2015

A new method for designing moment resisting concrete frames failing in a global mode is presented in this paper. Starting from the analysis of the typical collapse mechanisms of frames subjected to horizontal forces, the method is based on the application of the kinematic theorem of plastic collapse. The beam section properties are assumed to be known quantities, because they are designed to resist vertical loads. As a consequence, the unknowns of the design problem are the column sections. They are determined by means of design conditions expressing that the kinematically admissible multiplier of the horizontal forces corresponding to the global mechanism has to be the smallest among all kinematically admissible multipliers. In addition, the proposed design method includes the influence of second-order effects. In particular, second-order effects can play an important role in the seismic design and can be accounted for by means of the mechanism equilibrium curves of the analysed collapse mechanism. The practical application of the proposed methodology is herein presented with reference to the design of a multi-storey frame whose pattern of yielding is validated by means of push-over analysis.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.383-393
• /
• 2018

In this study, seismic performance of low and medium-rise RC buildings with wide-beam and ribbed-slab were evaluated numerically. Moment resisting systems consisting of moment and dual frame were selected as structural system of the buildings. Sufficiency of moment resisting wide-beam frames designed with high ductility requirements were evaluated. Upon necessity frames were stiffen with shear-walls. The buildings were designed in accordance with the Turkish Earthquake Code (TEC 2007) and were evaluated by using the strain-based nonlinear static method specified in TEC. Second order (P-delta) effects on the lateral load capacity of the buildings were also assessed in the study. The results indicated that the predicted seismic performances were achieved for the low-rise (4-story) building with the high ductility requirements. However, the moment resisting frame with high ductility was not adequate for the medium-rise building. Addition of sufficient amount of shear-walls to the system proved to be efficient way of providing the target performance of structure.

• Structural Engineering and Mechanics
• /
• 제23권6호
• /
• pp.599-613
• /
• 2006

A method for the dynamical analysis of FE discretized uncertain linear and nonlinear structures is presented. This method is based on the moment equation approach, for which the differential equations governing the response first and second-order statistical moments must be solved. It is shown that they require the cross-moments between the response and the random variables characterizing the structural uncertainties, whose governing equations determine an infinite hierarchy. As a consequence, a closure scheme must be applied even if the structure is linear. In this sense the proposed approach is approximated even for the linear system. For nonlinear systems the closure schemes are also necessary in order to treat the nonlinearities. The complete set of equations obtained by this procedure is shown to be linear if the structure is linear. The application of this procedure to some simple examples has shown its high level of accuracy, if compared with other classical approaches, such as the perturbation method, even for low levels of closures.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.11-17
• /
• 2002

The first-order conditional moment closure (CMC) model is applied to $CH_4$/Air turbulent jet diffusion flames(Sandia Flame D, E and F). The flow and mixing fields are calculated by fast chemistry assumption and a beta function pdf for mixture fraction. Reacting scalar fields are calculated by elliptic CMC formulation. The results for Flame D show reasonable agreement with the measured conditional mean temperature and mass fractions of major species, although with discrepancy on the fuel rich side. The discrepancy tends to increase as the level of local extinction increases. Second-order CMC may be needed for better prediction of these near-extinction flames.

• Communications for Statistical Applications and Methods
• /
• 제12권1호
• /
• pp.253-264
• /
• 2005

Hader and Park(l978) suggested the concept of slope-rotatability in axial directions for second order response surface designs. In this paper, the moment conditions for slope-rotatability in axial directions are shown and the measures for evaluating slope-rotatability in axial directions are proposed.

• 콘크리트학회지
• /
• 제7권3호
• /
• pp.187-198
• /
• 1995

본 연구는 RC 박스거더교 상부구조의 체계신뢰성 해석과 체계신뢰성에 기초한 내하력 평가를 위하여 실용적이고 실제적인 신뢰성 모델 및 방법을 제안하였다. 시스템으로서 교량의 보유내하력을 정확히 예측한다는 것은, 특히 교량이 높은 여용성을 갖고 있고 열화손상이 심각한 경우에는 더욱 어려운 문제이다. 본 연구는 교량의 체계신뢰성에 상응하는 교량시스템강도로서 정의도리 수 잇는 등가의 시스템가동의 항으로 교량의 보유내하력을 평가하는 새로운 접근방법을 제안하였다. 즉, 이 방법은 체계신뢰성지수의 FOSM(Fdirst Order Second Moment)형태에서 유도된 등가시스템저항강도로서 보다 실제적이고 합리적인 극산시스템저항강도 평가방법이다. 본 연구에서 제안된 RC박스거더교를 위한 강도한계상태모형은 휨 및 전단강도에 기초하였다. 그리고 박스거더 상부구조의 체계신뢰성 문제는 주요 파괴 메카니즘이나 각거더의 한계파괴상태에 기초한 FMA(Failure Mode Approach) 로부터 획득한 직-병렬 혼합모델로서 정식화하였다. 제안된 모형의 신뢰성해석에는 AFOSM(Advanced First Order Second Moment) 과 IST(Importance Sampling Technique) 시뮬레이션 알고리즘을 사용하였다.