• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.17-23
• /
• 2010

Titanium alloy is one of the hard processing materials made by the traditional manufacturing method because of the excellent mechanical strength. Ablation of titanium alloy is investigated by using a femtosecond laser which is a regenerative amplified Ti:sapphire laser with 1kHz repetition rate, 184fs pulse duration time and 785nm wavelength. Experiments are carried out under various ablation conditions with different pulse overlap ratios for the rectangular shape and micro hole. Test results show that the ablation characteristic according to pulse overlap ratio of titanium alloy seems to be as non-linear type at the different zone of energy fluence. The optimal condition of rectangular shape processing is obtained at the laser peak power 1.3mW, pulse overlap ratio of 90%, beam gap of $1\;{\mu}m$. The micro hole has a good quality from the pulse overlap ratio of 99% at the same laser peak power. With the optimal processing condition, the fine rectangular shape and micro hole without burr and thermal damage are achieved.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.4
• /
• pp.363-367
• /
• 2015

This paper reports on thermally adjusted graphene oxide (GO) as the hole transport layer (HTL) for organic light-emitting diodes (OLEDs). GO is generally not suitable for HTL of OLEDs because of intrinsic specific resistance. In this paper, the specific resistance of GO is adjusted by the thermal annealing process. The optimum specific resistance of HTL is found to be $10^2{\Omega}{\cdot}m$, and is defined by the maximum current efficiency of OLEDs, 2 cd/A. In addition, the reasons for specific resistance change are identified by x-ray photoelectron spectroscopy (XPS). First, the XPS results show that several functional groups of GO were detached by thermal energy, and the amount of epoxide changed substantially following the temperature. Second, the full width at half maximum (FWHM) of the C-C bond decreased during the process. That means the crystallinity of the graphene improved, which is the scientific basis for the change in specific resistance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.285-291
• /
• 2017

Micro-needles are used as transferring devices for sampling of tiny constitute substances from biological bodies. Typically, nickel is used as a coating to improve the rigidity of micro-needles. This study introduces the methodology to manufacture a WC needle with very high hardness and toughness. Micro-EDM technology was used to manufacture micro-needles with holes $130{\mu}m$ in diameter and $2300{\mu}m$ in length. A micro-needle was aligned to the micro-EDM electrode using a custom two degree-of-freedom alignment system. A three-step manufacturing technique was developed to drill a micro-hole using a WC electrode. In the first process, an electrode $105{\mu}m$ in diameter was used to make a hole. Electrodes of 90 and $105{\mu}m$ diameters were used in the second and third process, respectively. Consequently, a WC micro-needle with an inner hole of $135{\mu}m$ diameter, length of $2300{\mu}m$, and outer diameter of $300{\mu}m$ was developed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1407-1411
• /
• 2008

In material processing, a laser system with optimal laser parameters has been considered to be significant. Especially, the laser scribing technology is thought to be very important for fabricating DSSC(Dye sensitized solar eel!) modules with good quality. Moreover, the $TEM_{00}$ mode laser beam is the most dominant factor to decide the IPCE(Incident photon to current conversion efficiency) characteristics. In order to get the $TEM_{00}$ mode, a pin-hole is inserted within a simple pulsed Nd:YAG laser resonator. And the spatial field distribution is measured by using three size pin-hole diameters of 2.0, 6.0mm respectively. At that moment, each case has the same laser beam energy by adjusting the discharge voltage and pps(pulse per second). From those results, it is known that the pin-hole size of 2.0mm has the perfect $TEM_{00}$ mode. In addition, at the charging voltage of 1000V, 10pps and the feeding speed of 1.11mm/sec, the SEM photo of FTO(Fluorine-doped tin oxide) thin film layers shows the best scribing trace.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.299-303
• /
• 1989

Authors have developed highly reproducible calibration method for the Micro-Selectron HDR Ir-192 system (Nucletron, Motherland). The new jig has a 10cm radius circular hole in the $30cm{\times}30cm{\times}0.2cm$ acrylic plate, and 5F flexible bronchial tubes are attached around the hole. The source moves along the circle in the tubes and the ionization chamber is placed verticaly at the center of the circular hole (center of the jig). Dose distribution near the center was derived theoretically, and measured with the film dosimetry system. Theoretical calculation and measurement show the error margin below $0.1\%$ for 1mm or 2mm position deviation. We have measured at 12 and 24 points of circle with 1, 6, 11 and 21 second dwell time of source in order to calculate the activity of the source. Measurements have been repeated daily for 50 days. The accuracy and the reproducibility are below $1\%$ error margin. The half life of the source from our measurement is estimated $73.4\pm0.4$ days.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.4
• /
• pp.357-359
• /
• 2010

While a delayed intracerebral hemorrhage at the site of a ventricular catheter has occasionally been reported in literature, a delayed hemorrhage caused by venous infarction secondary to ventriculoperitoneal shunting has not been previously reported. In the present case, a 68-year-old woman underwent ventriculoperitoneal shunting through a frontal burr hole, and developed a hemorrhagic transformation of venous infarction on the second postoperative day. This massive venous infarction was caused by bipolar coagulation and occlusion of a large paramedian cortical vein in association with atresia of the rostral superior sagittal sinus. Thus, to eliminate the risk of postoperative venous infarction, technical precautions to avoid damaging surface vessels in a burr hole are required under loupe magnification in ventriculoperitoneal shunting.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.29.5-30
• /
• 2016

(1) The correlation between the mass of supermassive black holes (SMBHs) and the properties of their host galaxies suggests that SMBHs and host galaxies are closely linked in their formation and evolution. While the exact origin of their relationship is still under debate, theoretical models often invoke feedback from active galactic nuclei as a crucial mechanism for establishing the BH-host correlation. In the first part of my talk, I will present our efforts to find observational sign of the AGN feedback in young luminous AGNs. (2) While intermediate-mass black hole (IMBH) is thought be cosmologically important class to understand the link between stellar mass black holes and SMBHs, it is extremely rare in the present-day Universe. In the second part of this talk, I will report a Gemini/GMOS-N IFU study of an ultraluminous X-ray source in NGC 5252, which is a possible candidate of an off-nuclear non-stellar black hole.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1728-1738
• /
• 2001

Measurements have been made in an automotive HVAC b1ower for two different centrifugal fans. This work is directed at improving the performance of a conventional forward-curved centrifugal fan for a given small blower casing. Mean velocities and pressure have been measured using a miniature five-hole probe and a pressure scanning unit connected to an online data acquisition system. First, we obtained the fan performance versus flow rates showing a significant attenuation of unstable nature achieved with the new fan rotor in the surging operation range. Second, aerodynamic characterizations were carried out by investigating the velocity and pressure fields in the casing flow passage for different fan operating conditions. The measurements stowed that performance coefficients are strongly influenced by flow characteristics at the throat region. The main flow features ware common in both fans, but improved performance is achieved with tole new fan rotor, particularly in lower flow rate legions. Based on the measured results, design improvements were carried out in an acceptable operation range, which gave considerable insight into what features of flow behavior ware most important.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.27.4-27.4
• /
• 2017

(1) The correlation between the mass of supermassive black holes (SMBHs) and the properties of their host galaxies suggests that SMBHs and host galaxies are closely linked in their formation and evolution. While the exact origin of their relationship is still under debate, theoretical models often invoke feedback from active galactic nuclei as a crucial mechanism for establishing the BH-host correlation. In the first part of my talk, I will present possible observational biases in the BH-host relation, and methods to overcome these biases. I will also report our efforts to find observational sign of the AGN feedback in high-z young luminous AGNs. (2) While intermediate-mass black hole (IMBH) is thought be cosmologically important class to understand the link between stellar mass black holes and SMBHs, it is extremely rare in the present-day Universe. In the second part of this talk, I will report a Gemini/GMOS-N IFU study of an ultraluminous X-ray source in NGC 5252, which is a possible candidate of an off-nuclear non-stellar black hole.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.70-71
• /
• 2007

Analyzing pentacene field effect transistors (FETs) with Au source and drain electrodes as Maxwell-Wagner effect elements, electron and hole injection from the Au electrodes into the FET channel were examined using current-voltage (I-V), capacitance-voltage (C-V) and optical second harmonic generation (SHG) measurements. Based on these results, a mechanism of the hole and electron injection into pentacene from the Au electrodes and subsequently recombination mechanism with light-emitting in the pentacene layer are discussed, with taking into account the presence of trapped charges.