• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.88-92
• /
• 1991

To analyze the effects of the system parameters on the target parameters, which include the amount of water evaporation, water solubility index(WSI) and water absorption index(WAI), test trials of fractional factorial design of the three process variables at three levels were carried out for corn grit with a laboratory twin-screw extruder with three different screw configurations. The system parameters collected from the trials, such as extrusion temperature, specific mechanical energy input(SME) and mean residence time(RT), were showed the ranges of $129{\sim}182^{\circ}C$, $67{\sim}163\;kwh/ton$ and $12{\sim}34\;sec$, respectively. Within these ranges of the system parameters, the target parameters were able to be quantified by using multiple regression equations. The correlation of results with the system parameters blocked by the screw configuration as dependent variables, yield correlation coefficients above 0.90, and the correlation using the system parameters obtained from whole experiment system as the dependent variables yield correlation coefficients around 0.80. The functional relationship, which can be quantified by second order polynomial regression equation with only two system parameters within necessary degree of accuracy, can he graped in three dimensional surface response and contour diagrams.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.47-55
• /
• 2016

The purpose of this study was to control root-knot nematode, Meloidogyne incognita on pumpkin seedling with 10%, 20% coffee ground compost and 1% plant velvet bean powder (plain skin bean, leopard skin bean, hole plant, bean pod). Among the root-knot nematode insecticide treatments, the velvet bean plant powder was the highest mortality rate with 83.2% in greenhouse condition. In addition, the root-knot nematode second juvenile mortality significantly increased with the lapse of processing time for each concentration of leopard skin velvet bean extract in vivo. After 24 hours, the mortality rate of root-knot nematode showed the highest at 1.2% and 2.4% of leopard skin velvet bean extract. The growth promoting effect of seedlings pumpkin, 20% of coffee ground compost treatments inhibited the growth of pumpkin seedlings and 1% the tiger pattern velvet beans powder was the most to promote the growth of pumpkin seedlings. However, the results indicated that the organic materials of velvet beans and coffee ground compost are expected to be able to effectively control the root-knot nematode and further studies will be needed for the concentration and application methods.

• Geomechanics and Engineering
• /
• v.12 no.4
• /
• pp.657-673
• /
• 2017

Preventing water seepage and inrush into mines where close multiple-seam longwall mining is practiced is a challenging issue in the coal-rich Ordos region, China. To better protect surface (or ground) water and safely extract coal from seams beneath an aquifer, it is necessary to determine the height of the mining-induced fractured zone in the overburden strata. In situ investigations were carried out in panels 20107 (seam No. $2-2^{upper}$) and 20307 (seam No. $2-2^{middle}$) in the Gaojialiang colliery, Shendong Coalfield, China. Longwall mining-induced strata movement and overburden failure were monitored in boreholes using digital panoramic imaging and a deep hole multi-position extensometer. Our results indicate that after mining of the 20107 working face, the overburden of the failure zone can be divided into seven rock groups. The first group lies above the immediate roof (12.9 m above the top of the coal seam), and falls into the gob after the mining. The strata of the second group to the fifth group form the fractured zone (12.9-102.04 m above the coal seam) and the continuous deformation zone extends from the fifth group to the ground surface. After mining Panel 20307, a gap forms between the fifth rock group and the continuous deformation zone, widening rapidly. Then, the lower portion of the continuous deformation zone cracks and collapses into the fractured zone, extending the height of the failure zone to 87.1 m. Based on field data, a statistical formula for predicting the maximum height of overburden failure induced by close multiple seam mining is presented.

• Journal of Korean Medical classics
• /
• v.12 no.1
• /
• pp.168-195
• /
• 1999

The hakgil is the important disease in the oriental medicine historically. In the preseant time also this disease continually appear all over the world. So purpose of this study is that consider the symptoms and pathogenesis of hakgil(瘧疾) with the point of view of oriental medicine. And in this study, the results are summarized as the followings. 1. The symptos of hakgil(瘧疾). 1) Rigor and heat spasm : The main symptoms of hakgil is the severe and periodical rigor and heat spasm. Generally the rigor first appear and later the heat spasm appear. According to the first and last, severe and weak, the hakgil is classified to hanhak(寒瘧), onhak(溫瘧), danhak(癉瘧), binhak(牝瘧). 2) The regulation of the time of spasm : The spasm occour in the same time daily or one time in two days, three days or several days. And the spasm time is regulary in day or night. 3) The term between the spasm and next one become later or faster. It can be decided that the becoming worse and better in the disease with the signs. 4) The seasonal property Generally the hakgil appear in summer and early autumn. 5) The other kind of hakgil there are five-organ hakgil(五臟瘧), six-kyung hakgil(六經瘧), janghak(瘴瘧), kuihak(鬼瘧), six-gi hakgil(六氣瘧), damhak(痰瘧), sikhak(食瘧), and so on. 6) The pulse condition of the hakgil is chiefly hyun(弦). 2. The pathogenesis of the hakgil 1) The cause of the hakgil The causes of the hakgil first are the seo(暑) or heat(熱) that make the problem in the cycle of five phases(五行). In the consequence, il open the hole of skin so that the pathogenic factors easily invade the humanbody and at the same time the pathogenic factor in the inside easily come out, that make the spasm. In the second time the pathogenic factor of yin(陰) - wind(風), cold(寒), water(水) invade through the opened skin to combine with the factor in the inside. Such condition make the hakgil and the accessory spasm. 2)The pathogenesis of hakgil(瘧疾) (1) The rigor and heat spasm of hakgil(瘧疾) appear because in summer the human body don't accomplish a task of summer because of hot weather or heat, so in autumn the ki(氣) of human body separate into yin(陰) and yang(陽), and the skin of human body is weaken so the saki(邪氣: pathogenic factors) is easily come into the human body. At this time the circulation of ki(氣) is obstructed, so the jungki(精氣: vital substance) apply to straighten the circulation of ki(氣), if the jungki(精氣: vital substance) help the yin(陰) the rigor spasm appear in the opposit direction the jungki(精氣: vital substance) help the yang(陽) the heat spasm appear. (2) The period of circulation of ki(氣) and jungki(精氣: vital substance) is one day, so the general period of spasm of hakgil(瘧疾) is one day, But if the saki(邪氣: pathogenic factors) come into the human body deeply, the jungki(精氣: vital substance) cannot apply 10 straighten the circulation of ki(氣) every day so the period of spasm become longer.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.455-459
• /
• 2014

We grew the $Li_6Gd(BO_3)_3:Ce^{3+}$ scintillator and determined the scintillation and thermoluminescence properties for X-rays. The emission spectrum of $Li_6Gd(BO_3)_3:Ce^{3+}$ is located in the range of 370~500 nm, peaking at 423 nm an 455 nm, due to the $4f{\rightarrow}5d$ transition of $Ce^{3+}$ ions. The fluorescence decay time of the crystal is composed three components. The fast component is 60 ns (25%), the intermediate component is 787 ns (29%) and the slow component is $5.9{\mu}s$ (46%) of the crystal. The after-glow is caused by the electron and hole traps in the crystal lattice. We determined physical parameters of the traps in the crystal. The thermoluminescence trap are composed two traps. The determined activation energy (E), kinetic order (m) and frequency factor (s) of the first trap are 0.65 eV, 1.01 and $6.9{\times}10^8s^{-1}$. And, the determined activation energy, kinetic order and frequency factor of the second trap are 0.96 eV, 1.79 and $3.1{\times}10^{12 }s^{-1}$, respectively.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.348-354
• /
• 1998

To investigate an influence of the thermal preheating for the substrates exerted on the heteroepilayers, the ZnTe epilayers are grown on the GaAs (100) at the substrate temperature of 450~$630^{\circ}C$ by hot wall epitaxy (HWE). For this purpose, double crystal rocking curve (DCRC) and photoluminescence (PL) are measured. The full width at half maximum of DCRC are the smallest in the ZnTe epilayers grown on the GaAs thermally etched at around both $510^{\circ}C$ and $590^{\circ}C$. However, at around $550^{\circ}C$ they increase due to the reconstruction of the atoms in the surface. And they increase due to the oxide layer at below $490^{\circ}C$ and due to the surface defects at above $610^{\circ}C$. From PL analysis, the full width at half maximum of the light hole exciton $X_{1s,th}$ and of the second-order Raman line increase at around $550^{\circ}C$. With the increasing preheating temperature, the intensities of Y-bands and of the oxygen bound exciton (OBE) peak related to an oxide layer on the GaAs surface generally decrease. From these experimental results, it's confirmed that the GaAs substrate thermally etched influences the ZnTe pilayers.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.1-12
• /
• 2007

For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

• Journal of Educational Research in Mathematics
• /
• v.9 no.1
• /
• pp.279-294
• /
• 1999

The level-based task learning had an effect on enhancing the math achievement of enrichment and ordinary classes. Besides, the analysis of mathematical attitude change showed that the level-based task learning took effect in the experimental class in every domain, including self-confidence, flexibility, will power, reaction and value, while it made little difference to the comparative class. The findings were as follows in detail. 1. The Outcome of the Achievement Test 1) The Enrichment Class In the first two tests, there were little differences in the enrichment class, But the disparity between the experimental and comparative classes became larger as this study advanced with 4.3 for the third test, 6.4 for the fourth and 6.1 for the fifth. 2) The Ordinary Class In the first to fifth achievement tests, the ordinary class made less difference than the enrichment class did. But there appeared some effect as this study progressed, since the mean grade disparity between the experimental and comparative classes was 2.1 for the first test, 3.5 for the second, 3.9 for the third, 4.4 for the fourth and 6.3 for the fifth. 3) The Supplementary Class The supplementary class showed no big difference in the first two tests. But, like the ordinary class, there was some effect with the lapse of the third 2.9 for the test, 3.2 for the fourth and 4.1 for the fifth. 2. The Change of Mathematical Attitude 1) The Experimental Class The task learning by level had a great deal of effect on the experimental class, as the pre-and post-comparative analyses showed that this class's grades were 5.1 for self-confidence, 10.8 for flexibility, 11.3 for will power, 9.7 for curiosity, 10.9 for reaction and 2.8 for value. 2) The Comparative Class The relative comparison between the comparative class and experimental class revealed that there was a hole effect on the comparative class. 3. The Outcome of Questionnaire Survey 1) They showed a positive reaction, as 40.1% of them answered the level-based task loaming served to raise their achievement, and 48.0% told so-so, and 11.9% replied they weren't helped by it. 2) The results after the experiment were;37.8% of the students say they under- stood practically everything while 12.6% of them say they under stood almost half. 3) The will to learn after the experiment shows dramatic changes between the two classes, The students in the enrichment class showed better will to learn than the students in the ordinary and supplementary classes did.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.112-131
• /
• 2000

In spite of its many strong points, pole-pole electrode configuration is not often used for ground electrical resistivity survey except for bore hole survey as normal logging and for archaeological investigation. Above all, poor spatial resolution of pole-pole survey may be responsible for this. But recent experiences so far gained by the present authers lead them to think that pole-pole survey can be at least a viable means of reconnaissance survey in near-surface conductive environment and an effective interpretational scheme may augment its resolution. As well known, a response of any other electrode configuration is a linear combination of pole-pole responses. Based on this principle of linear superposition and the principle of reciprocity, the other 'responses' can be derived with simple additions and subtractions of pole-pole responses. Though such responses are not always correct due to the adverse effects of noises, combined with the potential decay curves, they can be helpful to interprete better pole-pole survey data especially in connection of the resolution. This can be comparable to the use of the first or second derivatives of gravity and magnetic intensity surveys.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.163-173
• /
• 2014

When evaluating the spatial resolution images and evaluation of low contrast resolution using CT standard phantom, and might present a automated quantitative evaluation method for minimizing errors by subjective judgment of the evaluator be, and try to evaluate the usefulness. 120kVp and 250mAs, 10mm collimation, SFOV(scan field of view) of 25cm or more than, exposure conditions DFOV(display field of view) of 25cm, and were evaluated the 24 passing images and 20 failing images taken using a standard reconstruction algorithm by using the Nuclear Associates, Inc. AAPM CT Performance Phantom(Model 76-410). Quantitative evaluation of low contrast resolution and spatial resolution was using an evaluation program that was self-developed using the company Mathwork Matlab(Ver. 7.6. (R2008a)) software. In this study, the results were evaluated using the evaluation program that was self-developed in the evaluation of images using CT standard phantom, it was possible to evaluate an objective numerical qualitative evaluation item. First, if the contrast resolution, if EI is 0.50, 0.51, 0.52, 0.53, as a result of evaluating quantitatively the results were evaluated qualitatively match. Second, if CNR is -0.0018~-0.0010, as a result of evaluating quantitatively the results were evaluated qualitatively match. Third, if the spatial resolution, as a result of using a image segmentation technique, and automatically extract the contour boundary of the hole, as a result of evaluating quantitatively the results were evaluated qualitatively match.