• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.146-151
• /
• 2018

In this study, we compared the threshold-voltage extraction methods of accumulation-type JLDG (junctionless double-gate) MOSFETs (metal-oxide semiconductor field-effect transistors). Threshold voltage is the most basic element of transistor design; therefore, accurate threshold-voltage extraction is the most important factor in integrated-circuit design. For this purpose, analytical potential distributions were obtained and diffusion-drift current equations for these potential distributions were used. There are the ${\phi}_{min}$ method, based on the physical concept; the linear extrapolation method; and the second and third derivative method from the $I_d-V_g$ relation. We observed that the threshold-voltages extracted using the maximum value of TD (third derivatives) and the ${\phi}_{min}$ method were the most reasonable in JLDG MOSFETs. In the case of 20 nm channel length or more, similar results were obtained for other methods, except for the linear extrapolation method. However, when the channel length is below 20 nm, only the ${\phi}_{min}$ method and the TD method reflected the short-channel effect.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.106-111
• /
• 2001

The applicability of near infrared reflectance spectroscopy(NIRS) was tested to determine the protein and oil contents in ground soybean [Glycine max (L.) Merr.] seeds. A total of 189 soybean calibration samples and 103 validation samples were used for NIRS equation development and validation, respectively. In the NIRS equation of protein, the most accurate equation was obtained at 2, 8, 6, 1(2nd derivative, 8 nm gap, 6 points smoothing and 1 point second smoothing) math treatment condition with SNV-D (Standard Normal Variate and Detrend) scatter correction method and entire spectrum by using MPLS (Modified Partial Least Squares) regression. In the case of oil, the best equation was obtained at 1, 4, 4, 1 condition with SNV-D scatter correction method and near infrared (1100-2500nm) region by using MPLS regression. Validation of these NIRS equations showed very low bias (protein:-0.016%, oil : -0.011 %) and standard error of prediction (SEP, protein: 0.437%, oil: 0.377%) and very high coefficient of determination ($R^2$, protein: 0.985, oil : 0.965). Therefore, these NIRS equation seems reliable for determining the protein and oil content, and NIRS method could be used as a mass screening method of soybean seed.

• Health Policy and Management
• /
• v.9 no.3
• /
• pp.33-52
• /
• 1999

The purpose of this study is to project the supply and demand for nurses till the year 2012 and to make recommendations for establishment of proper policies regarding them. To predict the supply of nurses. a baseline projection and demographic methods were employed. The derivative demand was used to forecast the demand of nurses. The results of this study provide us with valuable information on nursing manpower planning for the 21th century. Specifically. results indicate that there will be an oversupply of nurses in the near future based on the current productivity. Based on the medical law. there will be an undersupply of nurses till 2002 but an oversupply after that. Thus. the active supply of nurses must be decreased. One way to achieve this would be decreasing the size of training and education. Thus. we recommend that the number of entrances to 4 year programs will be reduced 20% in 2004. and a reduction of 20% by 2005 in 3 year programs. The results of this study suggest the following: First. a manpower bank for nurses who are trying to reenter the market must be established. Second, improvement of education and retraining is needed for the quality control of nurses. Further studies should take into consideration the above factors.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.443-457
• /
• 2018

In this article, a comparative study has been made to investigate the scattering behaviour of three layered structure model on torsional surface wave. For such model intermediate layer is taken as fiber reinforced composite, resting over a dry sandy Gibson substratum and underlying by different anelastic media. We consider two distinct mediums for topmost layer. In the first case, topmost layer has been taken as fluid saturated homogeneous porous layer, while in the second case the fluid saturated porous layer has been replaced by a transversely isotropic layer. Simple form expression for the secular equation of torsional surface wave has been worked out in both the cases by executing specific boundary conditions, which comprises Whittaker's function and its derivative, for imminent result that have been elaborated asymptotically. Some special cases have been constituted which are in excellent compliance with recorded literatures. For the sake of comparative study, numerical estimation and graphical illustration have been accomplished to identify the effects of the width ratio of the layers, Biot's gravity parameter, sandy parameter, porosity parameter and other heterogeneity parameters corresponding to the layers and half spaces, horizontal compressive and tensile initial stress on the phase velocity of torsional surface wave.

• Journal of Biomedical Engineering Research
• /
• v.38 no.3
• /
• pp.95-101
• /
• 2017

In this study, photoplethysmography(PPG) was suggested as a way to replace the ankle-brachial index(ABI) in diagnosing PAD. The method using the PPG was presented for the simplification of the PAD diagnosis method which was used before. And the index related to the health condition of the artery from the PPG measured in both big toes of the subjects through the experiment was drawn. The indexes showing the significant relativeness in the Pearson correlation analysis with the ABI were the stiffness index(SI), reflection index(RI); it was confirmed each of them had the correlation coefficient of 0.688, and 0.637 at p < 0.05. The explanation ability of the linear regression equation derived using ABI, SI and RI was 52.5%. The explanation ability of the secondary curve regression equation derived using ABI, squared SI was 54.7%. It is expected to provide patients with significant results and draw the index associated with PAD by measuring PPG easily in the real life instead of the ambulatory care field.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.5
• /
• pp.1535-1547
• /
• 2015

A vector field on a Riemannian manifold (M, g) is called concircular if it satisfies ${\nabla}X^v={\mu}X$ for any vector X tangent to M, where ${\nabla}$ is the Levi-Civita connection and ${\mu}$ is a non-trivial function on M. A smooth vector field ${\xi}$ on a Riemannian manifold (M, g) is said to define a Ricci soliton if it satisfies the following Ricci soliton equation: $$\frac{1}{2}L_{\xi}g+Ric={\lambda}g$$, where $L_{\xi}g$ is the Lie-derivative of the metric tensor g with respect to ${\xi}$, Ric is the Ricci tensor of (M, g) and ${\lambda}$ is a constant. A Ricci soliton (M, g, ${\xi}$, ${\lambda}$) on a Riemannian manifold (M, g) is said to have concircular potential field if its potential field is a concircular vector field. In the first part of this paper we determine Riemannian manifolds which admit a concircular vector field. In the second part we classify Ricci solitons with concircular potential field. In the last part we prove some important properties of Ricci solitons on submanifolds of a Riemannian manifold equipped with a concircular vector field.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.341-344
• /
• 1999

We reported compositional separation(CS) into Co-enriched and Cri-enriched components inside the grains of Co-Cr based thin films prepared by rf sputtering. CS strongly depends on the sputtering conditions of substrate temperature and target composition. Tuning the microstructure of the Co-Cr films is important in order to employ the CS for high-density magnetic recording. We investigated the origin of CS from thermodynamic viewpoint. We employ a spinodal decomposition-like model to describe the origin of the CS in Co-Cr films. We consider the total free energy of the Co-Cr films as the sum of several free energies of; 1) thermodynamic mixing entropy of a binary solid solution, 2) magnetic ordering interaction(MOI) energy below the Curie temperature, and 3) excess interaction energy(XS) caused by the sputtering process as a function of temperature and composition. Those energies distorted the total free energy like the spinodal decomposition and caused the compositionally separated fine microstructure inside the grains. If the second derivative of the total free energy with respect to Cr composition becomes negative at a given substrate temperature, we may observe a metastable compositional separation inside the Co-Cr alloy films. We expect to exploit the microstructure of CS for ultra-high density magnetic recording.

• Molecules and Cells
• /
• v.25 no.2
• /
• pp.224-230
• /
• 2008

Ceramides are well-known second messengers that induce apoptosis in various kinds of cancer cells, and their effects are closely related to radiation sensitivity. Phytoceramides, the yeast counterparts of the mammalian ceramides, are also reported to induce apoptosis. We investigated the effect of a novel ceramide derivative, N-acetylphytosphingosine (NAPS), on the radiosensitivity of NCI-H460 human lung carcinoma cells and its differential cytotoxicity in tumor and normal cells. The combination of NAPS with radiation significantly increased clonogenic cell death and caspase-dependent apoptosis. The combined treatment greatly increased Bax expression and Bid cleavage, but not Bcl-2 expression. However, there was no effect on radiosensitivity and apoptosis in BEAS2B cells, which derive from normal human bronchial epithelium. Cell proliferation and DNA synthesis were significantly inhibited by NAPS in both NCI-H460 and BEAS2B cells, but only the BEAS2B cells recovered by 48h after removal of the NAPS. Furthermore, the NCI-H460 cells underwent more DNA fragmentation than the BEAS2B cells in response to NAPS. Our results indicate that NAPS may be a potential radiosensitizing agent with differential effects on tumor vs. normal cells.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.298-301
• /
• 1999

This paper presents a design technique based on the root locus method fur a class of $n^{th}$ order plants using PID (Proportional-Integral-Derivative) x (n-1) stage PD controller. It is intended to satisfy both transient and steady state response specifications. This controller can be used instead of a conventional PID controller for the higher order plants to obtain better performances. The controlled system is approximated as a stable and robust second order controlled system. Only adjusting the controller gain, the desired performances of the controlled system are satisfied. For the stable plant including the plant with small dead time, the controlled system is made robustly stable. In case of the unstable plant, when the controller gain is adjusted higher than the critical value, the unstable plant can also be made stable. Robustness properties given by this controller proposed in this paper have also been demonstrated by numerical examples.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.159-169
• /
• 1998

The purpose of this study is to analyze the radiation characteristics of the shaped Cassegrainian antenna. Radiation pattern of the sub-reflector is calculated by GTD (Geometrical Theory of Diffraction) The complete radiation patterns are obtained by summing the reflect field from the surface and the diffracted fields from the edge. The first and the second derivative on the sub-reflector are calculated by the local interpolation technique. The Radiation characteristics of the main-reflector are obtained by integrating the surface current density, which is derived from PO approximation. The radiation integral is expanded by the Jacobi-Bessel series for the purpose of reducing the computation time.