• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.221-224
• /
• 2008

할선강성을 이용하여 모멘트저항골조의 모멘트재분배를 수행하는 선형해석법을 연구하였다. 제안된 방법에서는 모멘트재분배가 요구되는 부재의 소성힌지에 회전스프링을 모델링한 후, 이 스프링의 할선 강성을 조정하여 비탄성변형으로 인해 저감된 부재의 휨강성을 반영한다. 회전스프링의 할선강성을 조정하여 선형해석한 결과, 해당 부재와 전체 구조물에서 힘의 평형이 만족될 때까지 계산을 반복한다. 할선강성해석을 통해, 소성힌지의 비탄성변형에 의한 하중의 재분배가 고려될 수 있으며, 해당 소성힌지에서의 요구회전변형이 변형능력을 초과하지 않는지 비교함으로써 안전성을 평가할 수 있다. 검증을 위해, 제안된 방법은 기존의 연속보에 대한 실험연구와 비교되었으며, 기존건물의 평가에 적용되었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.85-92
• /
• 2003

Hysteretic behaviors of a seismic isolator are identified by using the regularized output error estimator (OEE) based on the secant stiffness model. A proper regularity condition of tangent stiffness for the current OEE is proposed considering the regularity condition of Duhem hysteretic operator. The proposed regularity condition is defined by 12-norm of the tangent stiffness with respect to time. The secant stiffness model for the OEE is obtained by approximating the tangent stiffness under the proposed regularity condition by the secant stiffness at each time step. A least square method is employed to minimize the difference between the calculated response and measured response for the OEE. The regularity condition of the secant stiffness is utilized to alleviate ill-posedness of the OEE and to yield numerically stable solutions through the regularization technique. An optimal regularization factor determined by geometric mean scheme (GMS) is used to yield appropriate regularization effects on the OEE.

• 한국지진공학회논문집
• /
• 제13권2호
• /
• pp.59-68
• /
• 2009

안전하고 경제적인 내진설계를 위해서는 설계 초기단계부터 모멘트재분배와 부재소성변형을 고려하는 것이 바람직하다. 본 연구에서는 할선강성해석을 사용하여 각 부재의 재분배된 모멘트와 소성변형을 직접적으로 고려할 수 있는 내진설계방법을 개발하였다. 모멘트재분배에 의하여 발생된 비대칭 부재강성을 나타내기 위하여, 비강접 단부접합부를 갖는 보-기둥요소(NREC요소)를 사용하여 구조물을 모델링하였다. NREC요소에 사용되는 할선강성은 건물 및 부재의 요구연성도에 기반하여 결정하였다. 할선강성 구조모델에 대한 선형해석을 수행하여 내진설계를 위한 부재력과 소성변형을 구하였다. 본 연구에서는 할선강성해석을 모멘트골조와 이중골조의 내진설계에 적용하였고, 설계결과를 정밀한 비선형해석 결과와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.985-988
• /
• 2008

철근콘크리트 구조물의 비탄성 내진설계를 위하여 할선강성을 사용한 선형해석법을 연구하였다. 제안된 방법에서는 기존의 탄성해석과 동일한 보-기둥 요소 및 면요소를 사용하여 구조물을 모델링하며, 비탄성거동의 영향을 반영하기 위하여, 비탄성변형이 예상되는 부재에 탄성강성 대신 할선강성을 사용한다. 할선강성을 사용하는 부재의 분포와 할선강성의 크기는 설계자가 의도하는 구조물의 소성메커니즘과 설계목표연성도에 의하여 결정된다. 이 구조해석모델에 대한 선형해석을 통하여 부재의 비탄성 설계강도를 직접 결정하고, 할선강성해석으로부터 구한 절점변위를 이용하여 할선강성보의 변형을 소성힌지에 발생된회전변형으로 변환한 후 소성변형에 대한 안전성을 평가한다. 제안된 방법을 이용하여 2차원 모멘트골조및 이중골조에 대한 내진설계를 수행하였으며, 3차원 골조에도 적용하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.498-501
• /
• 2004

A new slab design using secant stiffness, Direct Inelastic Slab Design, was developed. Since basically the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of slab because it can analyzes the inelastic behavior of structure using iterative calculations for secant stiffness. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and compared with traditional nonlinear analysis, and experiments. The Direct Inelastic Slab Design, as an integrated analysis/design method, can directly address the design strategy intended by the engineer, such as moment strength and ductility limit. As a result, economical and safe design can be achieved.

• Computers and Concrete
• /
• 제31권1호
• /
• pp.53-69
• /
• 2023

The rotational stiffness of a semi-rigid beam-to-column connection plays an important role in the reduction of the second-order effects in the precast concrete skeletal frames. The aim of this study is to present a detailed nonlinear finite element study to reproduce the experimental response of a semi-rigid precast beam-to-column connection composed by corbel, dowel bar and continuity tie bars available in the literature. A parametric study was carried using four arrangements of the reinforcing tie bars in the connection, including high ratio of the continuity tie bars passing around the column in the cast-in-place concrete. The results from the parametric study were compared to analytical equations proposed to evaluate the secant rotational stiffness of beam-to-column connections. The good agreement with the experimental results was obtained, demonstrating that the finite element model can accurately predict the structural behaviour of the beam-to-column connection despite its complex geometric configuration. The secant rotational stiffness of the connection was good evaluated by the analytical model available in the literature for ratio of the continuity tie bars of up to 0.69%. Precast beam-to-column connection with a ratio of the continuity tie bars higher than 1.4% had the secant stiffness overestimated. Therefore, an adjustment coefficient for the effective depth of the crack at the end of the beam was proposed for the analytical model, which is a function of the ratio of the continuity tie bars.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.221-241
• /
• 2022

Perfobond rib connectors are widely used in composite structures to achieve the composite action between the steel and the concrete, and empirical expressions for their strength and secant stiffness have been obtained by numerical simulations or push-out tests. Since perfobond connections are generally in an elastic state in the service process and the structural analysis are always based on the elastic properties of the members, the secant stiffness is not applicable for the normal structural analysis. However, the tangent stiffness of perfobond connections has not been introduced in previous studies. Moreover, the perfobond connections are bearing tension and shear force simultaneously when the composite beams subjected to torque or local loads, but the current studies fail to arrive at the elastic stiffness considering the combined effects. To resolve these discrepancies, this paper investigates the initial elastic stiffness of perfobond connections under combined forces. The calculation method for the elastic stiffness of perfobond connections is analyzed, and the contributions of the perfobond rib, the perforating rebar and the concrete dowel are investigated. A finite element method was verified with a high value of correlation for the test results. Afterwards, parametric studies are carried out using the reliable finite element analysis to explore the trends of several factors. Empirical equations for predicting the initial elastic stiffness of perfobond connections are proposed by the numerical regression of the data extracted by parametric studies. The equations agree well with finite element analysis and test results, which indicates that the proposed empirical equations reflect a high accuracy for predicting the initial elastic stiffness of perfobond connections.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.345-356
• /
• 2008

선행 연구에서는 할선강성에 대한 선형해석을 수행함으로써 편리하게 비탄성 설계를 할 수 있는 직접 비탄성 스트럿-타이 모델이 개발되었다. 본 연구에서는 기존 직접 비탄성 스트럿-타이 모델을 개선하여, 반복계산 없이 할선강성에 대한 한번의 선형해석으로 철근콘크리트 부재의 비탄성 설계를 수행할 수 있는 간략화된 직접 비탄성 스트럿-타이 모델 (simplified direct inelastic strut-and-tie model, 이하 S-DISTM)을 개발하였다. S-DISTM은 철근콘크리트 부재를 콘크리트 압축 스트럿과 철근 인장 타이로 모델링한다. 스트럿과 타이 요소는 설계자의 설계 전략에 따라 탄성강성 또는 할선강성의 선형 재료 모델을 사용한다. 스트럿과 타이 요소의 파괴 기준을 정의하기 위하여 콘크리트 압축파괴 및 철근 인장파단 등을 고려하였다. S-DISTM을 사용하여 깊은보, 연결보, 전단벽 등 다양한 전단지배 철근콘크리트 부재의 비탄성 설계를 수행하였고, 비탄성 설계로 결정된 철근양, 변형 능력 등을 기존 실험 결과와 비교하였다.

• Steel and Composite Structures
• /
• 제14권1호
• /
• pp.1-20
• /
• 2013

This paper presents the formulation for a novel force-based 1-D compound-element that captures both material and second order P-${\Delta}$ nonlinearities in steel frames. At the nodal points, the element is attached to nonlinear rotational and a translational springs which represent the flexural and axial stiffness of the connections respectively. By decomposing the total strain in the material as well as the generalised displacements of the flexible connections to their elastic and inelastic components, a secant solution strategy based on a direct iterative scheme is introduced and the corresponding solution strategy is outlined. The strain and slope of the deformed element are assumed to be small; however the equilibrium equations are satisfied for the deformed element taking account of P-${\Delta}$ effects. The formulation accuracy and efficiency is verified by some numerical examples on the nonlinear static, cyclic and dynamic analysis of steel frames.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.384-387
• /
• 2003

A new Direct Nonlinear Strut-Tie Model design method performing iterative calculations using secant stiffness was developed. Since basically the proposed design method uses elastic analysis, it has the advantages of convenience and stability in numerical analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it analyzes the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member. Through iterative calculations on the structure preliminary designed with member sizes, the strength and ductility demands of each member can be estimated so that they satisfy the given design strategy, and as the result economical and safe design is achieved.