• 복식문화연구
• /
• 제6권2호
• /
• pp.127-140
• /
• 1998

A study on the construction of Dan-Ryung in the early 16th century based on the shrouds from excavated tomb of Kim, Heum-Jo(1461-1528) is reported in this paper. This study is aimed at establishing database for a traditional Korean costume construction and emphasizing the necessity for development of methodology in writing report from excavated costume including measuring, construction methods and materials. This paper includes examples of measured length for each part of 'Dan-Ryung', reconstructured drawings, pictures, and construction methods. The followings on the construction of Dan-Ryung in the early 16th century are found in this study: 1) Dan-Ryung robes were made of less expensive hemp, cotton, silk & cotton, and ramie & silk. 2) As a whole, Dan-Ryung was lengthy and spacious and it had straighter and narrower sleeves when compared to the ones from the late Chosun. 3) There existed Moo which was large rectangular guest with double pleats at Dan-Ryung's side seam. Its round collar was constructed with a 3 cm width bias. Ball buttons on the outer collar and loops on the right shoulder are attached. 4) There existed a pair of indirectly attached slim and short strings. Inside string is directly attached. 5) Inside of the shoulder, a U-shaped shoulder pad made of the same cloth as the inner cloth was attached. hand sewing methods used include delicate flat-felled seam stitch, back-stitch and sew-up stitch.

• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.727-732
• /
• 2006

The purpose of this study was to investigate the effects of flame-proof clothing on physiological responses and subjective sensation. We measured rectal temperatures, local skin temperature, clothing microclimate, blood pressure, heart rate, body weight loss and subjective sensation during 90 minutes (30 min of rest, 45 min of exercise and 15 min of recovery periods). Seven male subjects wore flame-proof clothing or reformed flame-proof clothing under the environmental condition of $35{\pm}1^{\circ}C$, $45{\pm}5%$ RH and $25{\pm}1^{\circ}C$, $50{\pm}5%$ RH. The results of this study were as follows; Rectal temperature, mean skin temperature, clothing microclimate and blood pressure were significantly lower levels in reformed flame-proof clothing. Heart rate and body weight loss were also showed lower levels. Subjects replied less hot, less uncomfortable and less wet in wearing a reformed flame-proof clothing. Our present results suggest that the ventilation through of gusset in underarm seam and zipper in sideseam of slacks are qualitatively useful for physiological needs.

• 한국의류학회지
• /
• 제9권3호
• /
• pp.35-44
• /
• 1985

This research explored the effects of abrasion, laundering, and abrasion/laundering interaction upon wear of 15 durable nonwoven fabrics. Wear was measured in terms of changes in tensile strength and stiffness. The test materials consisted of nine different dry-laid commercial interfacing fabrics of various fiber contents and six spunbonded poyester and polypropylene fabrics. Three fixed levels of abrasion and four fixed levels of laundering made up the 3$\times$4 factorial analysis used for the experiment and the analysis of variance. Findings revealed that abrasion had a greater effect than laundering on strength and stiffness of the tested fabrics. Laundering seemed related to the particular fibers used and to the fixation quality of fiber bonds. Spunbonded webs performed better than dry-laid webs in retaining tensile strength Stiffness change occurred more readily than strength change. Lighter, flexible, stretchable fabrics seemed less easily abraded than heavier, stiff, less stretchable fabrics. The interfacing fabrics of 70/20/$10\%$ nylon/polyester/rayon blends with high crosswise stretchability effectively resisted wear caused by abrasion and laundering. Further research is recommended to study the effects of longer abrasion periods and additional laundering cycles o,1 wear qualities of nonwoven fabrics. Additional factors such as amount and fixation methods of bonding agents, the effect of shear distortion, seam construction, and drycleaning solvents could also be studied.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.10-14
• /
• 2012

Pulse laser welding was performed on C22 metal bellows. The results can be summarized as follows: Laser welded metal bellows had less thermal distortion, narrow HAZ, high aspect ratio in comparison with other welding processes like TIG, Plasma welding. Laser welded bellows has higher tensile strengths than that C22 base metal. The value of hardness in laser weld metal was measured 100-120 Hv, it was decreased compared to the base metal. It is reasoned that due to the annealed by heat input during the laser welding.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.350-353
• /
• 2009

The shielding enclosure is very essential device to test the electromagnetic wave power generated by various RF equipments. Some standards for the shielding enclosures were established to test them in right method. Generally, There are IEEE-STD-299 and MIL-STD-285 and NSA-65-6 of the method for measuring the effectiveness of shielding enclosures, the IEEE-STD-299 combined MIL-STD-285 and NSA-65-6 about the method for measuring shielding effectiveness(SE) about 1969 years, but, the measurement point of 299 proposal is many points(including shielding wall, seam, coner beat, shielding door, etc) and demand long time of measurement. To improve SE test method for shielding enclosures was studied and suggested to develop a proper test procedure. First, we measure reference level as frequency range and H/V polarization, secondly, measure leakage point, and finally, measure shield effect and calculate SE. Our method has a merit of the less measurement point than IEEE-STD-299, and shorten time than 299, and define representation SE of shielding enclosure effectively.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.20-24
• /
• 2001

The primary objective of this study was to empirically explore the mechanical properties of marketing Korean fabrics by using KES-FB system and estimate the sewability of Korean clothes by the mechanical properties. From the empirical research, it was found that Korean fabrics for spring and summer has been transformed easier and less flexible by shearing Korean fabrics for autumn and winter. Also, it was found that there is a significant difference in the hand value as tensile, surface and compression. It was found that Korean fabrics for spring and summer has a stiffness and elastic properties of matter and Korean fabrics for autumn and winter has a bulky and abundant elasticity. Finally, it was found that Korean fabrics for autumn and summer in the joint of account of the mechanical properties. Also, the difficulties of process has been expected by sewability like seam-pucker, over feed, sewing and steam-press.

• 복식
• /
• 제58권4호
• /
• pp.99-112
• /
• 2008

The aim of the study was to look into the construction methods of historical corsetry and compare them with the construction methods of corsetry today. Through a comparative study, it was concluded that the design, material, sewing and functions of corsetry of a certain period are sum of the clothing techniques and fashion of the time. Corset was first appeared at the end of the 16th century. It has been through many changes in terms of items, materials, patterns, sewing methods in order to make right silhouettes of the time. Now corsetry has been developed into various items such as waist nipper, all-in-one, nipper bra, and girdle. All these items have a common purpose, that is to improve the body shape. The corsetry of the past was made of non stretchable materials, so they used to restrict body movements, and required individual fitting several times. Due to the development of thin durable stretchable fabrics, functional bones, and advanced sewing machines, construction methods of seam, hem and opening are simplified compare to their predecessors. Consequently corsetry became less weighted, easy to wear, easy to wash and easy to mass produce. Yet they have consistency in sewing techniques such as using bones or wires to support bodice shape, using durable twill fabrics over plain for attractive body shapes.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.105-115
• /
• 2008

Men's outer wear, such as jackets and coats appeared since the 16th century. They have been changed from doublets, coats, justaucorps, tail-coats, frock coats and morning coats to contemporary men's suits. Since the early 17th century, sleeve patterns of men's outer jackets had been mostly two-pieces close fitted patterns. The purpose of this article is to compare sleeve patterns of various jackets, which appear in various historic costume books. Armhole measurements, sleeve head measurements, amounts of ease, armhole depths, armhole widths, crown heights, sleeve width and sleeve angle had been compared to find out the differences among patterns of different times and styles. Coming to the present, the difference between top sleeve and under sleeve became more obvious, and the sleeve angle became less curvy. Another interesting point is that there had been considerable amounts of ease, which is the difference between sleeve head measurements and corresponding armhole measurements. It is because the sleeve has been attached to the armhole not by seam but by string. It is believed that the present sleeves have more natural curve and shape compared to the past.

• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.1-8
• /
• 2010

탄성파 반사법 탐사는 석탄 구조를 묘사하기 위해 그리고 석탄 채굴법 중 장벽식 채단법(longwall mining)의 위험 경감을 위해 가장 널리 이용되며 가장 효과적인 방법 중의 하나이다. 그러나 이 탄성파 탐사법의 분해능은 화산암의 존재에 의해 영향을 받는다. 호주의 보웬분지(Bowen Basin)와 시드니 분지(Sydney Basin) 일부에 이러한 화산암이 분포하고 있으며, 이러한 지역에서 탄성파 탐사를 이용하여 지하지질구조를 정확히 밝혀내는 데는 어려움이 따를 수 있다. 결과적으로 그러한 지역은 석탄광 후보지로 관성을 끌지 못하게 된다 따라서, 이러한 현무암 지역에서 수행되는 탄성파 탐사의 성공률을 높이기 위한 기법들이 필요하다. 이 연구에서는 탄성파동 방정식에 기초한 모델링 기법을 이용하여 현무암의 물성차, 두계, 횡방향 연장성, 송신원에 대한 상대적인 위치, 다양한 형태의 불균질성이 탄성파 전파에 어떠한 영향을 주는가를 살펴본다. 탄성파 모델링 결과로부터 다음과 같은 결론을 얻었다. 1) 임피던스의 차가 큰 현무암과 다중 흐름(multiple flow)이 있는 경우 다중반사파가 강하게 나타나며 일차반사파가 약하게 나타난다. 2) 현무암층이 앓을 경우 현무암의 존재가 파의 전파에 미치는 효과가 두꺼운 현무암층에 의한 효과보다 적은 것으로 나타났으며, 3) 현무암이 부분적으로 덮여 있을 경우 표변전체가 현무암으로 덮여 있는 경우에 비해 그 효과가 미약하게 나타났다. 4) 저주파의 탄성파(특히 원거리 오프셋에서)가 고주파의 탄성파에 비해 현무암층을 더 잘 통과함을 알 수 있었다. 또한 5) 석탄층이 현무암층으로부터 얼리 떨어져 깊은 곳에 존재할수록 현무암층이 파의 전파에 미치는 영향이 적음을 알 수 있었다. 이러한 연구결과들은 현무암층 하부에 대하여 탄성파 탐사를 수행할 때 발생할 수 있는 문제에 대한 통찰력을 제공할 뿐 아니라 탄성파 잡음을 적절히 처리하고 저주파수 대역의 지오폰으로 원거리 오프셋에서 탄성파 탐사자료를 획득함으로써 탄성파 탐사 결과를 개선시킬 수 있다는 것을 보여준다.