• 제목/요약/키워드: Seal ring

검색결과 113건 처리시간 0.016초

점화안전장치용 격벽 착화모듈 설계 및 신뢰도 분석 (Design and Reliability Analysis of the Through Bulkhead Initiation Module for Arm-Fire-Device(AFD))

  • 장승교;차홍석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.273-276
    • /
    • 2008
  • 오링을 사용하지 않고 기밀을 유지할 수 있는 점화안전장치용 격벽 착화모듈을 설계하였다. 격벽 착화모듈은 도우너 화약에 의해 발생한 충격파가 격벽을 통해 억셉터 화약에 전달되었을 때 동작한다. 격벽 착화모듈의 구조적 안전성을 구조해석을 통해 확인하였고 점화 성능은 10cc 밀폐용기 시험을 통하여 검증하였다. 동작시험 결과를 토대로 통계적 처리방법인 Probit Method를 이용하여 신뢰도 분석을 하였다. 신뢰도 분석 결과를 통하여 격벽 착화모듈의 중요한 설계변수인 격벽두께를 결정하였다.

  • PDF

이축 볼밸브의 볼 경량화를 위한 응력해석 (Stress Analysis of a Trunnion Ball Valve for Ball Weight Reduction)

  • 김형우;조수길;박제인;이재환
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.373-380
    • /
    • 2020
  • 고압을 받는 플랜트용 제품 설계 시에 대부분 강건 구조를 지양하다 보면 안전율이 높아지고 중량이 과다 해지는 문제가 있다. 본 논문은 플랜트용 이축 볼밸브 볼의 경량화를 위하여 밸브의 3차원 모델링과 ANSYS를 적용한 유한요소해석으로 응력해석을 수행한 후에, 허용 응력 범위와 설계 변경 제한 조건 내에서 최적화 과정으로 볼의 중량 감소를 달성하였다. 약 22%의 볼 중량이 감소되었고 응력은 증가하였으나 안전계수는 1.25가 되었다. 볼의 일부분에 과도한 응력이 있으나 대부분 재료의 항복응력 허용치 내에 있어 안전한 상태이다. 유동의 흐름을 제어하는 실링 (seal) 역할을 하는 시트 인서트와 시트 링 등 밸브의 3차원 모델에 대한 정적 구조해석으로 응력 값을 확인하여 안전함을 확인하였고, 또한 대칭 구조인 부분에 대해 2차원 단순 모델의 구조해석으로 같은 결과가 도출됨을 확인하였다. 본 연구의 범위는 볼의 중량 감소라 볼의 감소된 치수가 도출되었으며, 주변 부재의 재설계는 (신제품 개발에 해당되어) 본 연구에 고려되지 않는다.

합류식 하수관거의 유출 특성 분석 조사 (Characteristics and Combined Sewer Overflows)

  • 안기선;장성용;권영호
    • 한국환경과학회지
    • /
    • 제19권6호
    • /
    • pp.747-753
    • /
    • 2010
  • It follows in quality and sewage exclusion method of the investigation objective sector and the Combined Sewer Overflows which is suitable in regional characteristics and the confluence area against the rainfall initially a flow and the medulla and measurement - it analyzes the initial rainfall outflow possibility control plan which is suitable in the domestic actual condition and it proposes the monitor ring plan for the long-term flow and pollution load data accumulation. From the research which it sees the Infiltration water/Influent water and CSOs investigation it passes by the phase of hazard chain and Namwon right time 4 it does not hold reverse under selecting, Measurement it used the hazard automatic flow joint seal Sigma 910 machine and in case 15 minute interval of the I/I, it measured a flow at case 5, 15 minute standing of the CSOs. The water quality investigation for the water leakage investigation of the I/I and the sewage from the point which is identical with flow measurement during on-the-spot inspection duration against 6 items which include the BOD sampling and an analysis, when the rainfall analysis for CSOs fundamental investigation analyzed against 18 items which include the BOD sampling. Consequently, for the optimum interpretation invasion water / inflow water of the this investigation area day average the lowest flow - water quality assessment veterinarian optimum interpretation hazard average per day - lowest flow - it averages a medulla evaluation law department one lowest flow evaluation technique and it selects, it presentation collectively from here it gets, position result with base flow analysis of invasion water / inflow water.