• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.66-71
• /
• 2011

This study analyzed the mechanical characteristics and evaluated their subsequent performance for two types of seals which reinforced characteristics with lower friction and anti-wear functions among the foremost important features in the automotive engine seals; one with the addition of glass fiber to PTFE(Polytetrafluoro ethylene); the other with the addition of self-lubricant molybdenumin addition to the glass fiber. Based on the configuration design of seal installed to the front part in the automotive engine, this study carried out interpretations on the stress and reaction for those two types of oil seals to compare the maximum stress and contact load generated from the seal steel, rubber and PTFE lip. This study also verified the stress concentration and anti-wear performance through the coefficient of friction, torque and durability test by producing two types of PTFE seals actually.

• 오토저널
• /
• 제7권1호
• /
• pp.48-54
• /
• 1985

One of the most probable reason of the apex seal damage in IR-2500 industrial Wankel (rotary) engine was believed to be the engine detonation. Both analytical and experimental studies were made with a view th find out engine detonation pressure. The stagnation detonation pressure $p_{03}$' was estimated based on the data from IR-2500 engine detonation tests, such as engine firing pressure, state of fresh charge at BDC and polytropic compression exponent. The estimated stagnation detonation pressure for the natural gas fueled IR-2500 engine was in excess of 3,700 psia. With natural gas liquid added to the natural gas the octane value of the fuel was lowered, thus, making the engine more prone to detonate. The estimated detonation pressure for the case with the mixed fuel was about 3,400 psia which was sufficiently high to break the apex seal. The subsequent engine lab tests performed on two identical engines with sole difference in the apex seal thickness between the two engines proved that the engine knock, in fact, was the villain of the apex seal failure.ilure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.433-434
• /
• 2009

• 한국가스학회지
• /
• 제26권6호
• /
• pp.24-29
• /
• 2022

이 논문은 LPG 자동차의 캠축베어링 시일의 오일누설, 컴퓨터커넥터 핀 손상에 의한 접촉불량, 베이퍼라이저 배부불량으로 인한 고장사례에 대하여 현상을 분석, 연구한 것이다. 첫 번째 사례는 실린더 헤드를 분해하여 확인한 결과 타이밍 시스템에서 가까운 엔진의 흡기캠축의 베어링과 시일의 조립부 손상으로 인해 이 부위로 엔진오일이 누설되는 것을 확인하였다. 두 번째 사례는 엔진컴퓨터로 공급되는 자동차의 시동을 제어하는 전원선의 커넥터 핀이 손상되어, 전원이 공급되지 않아 시동이 꺼진 것을 확인하였다. 세 번째 사례는 베이퍼라이저 내부에 이물질의 퇴적으로 인해 가스의 흐름이 원활하지 못하여 엔진의 부조화현상이 발생되었다. 결국, 베이퍼라이저에서 믹서로 적은 양의 가스를 공급하게 되고, 믹서의 스로틀 열림량을 제어하는 컴퓨터는 그 열림량만큼 공기를 공급하게 됨으로써 연소실에서 혼합기는 희박한 상태가 되어 엔진의 적정출력을 내지 못하는 것을 확인하였다. 따라서, 자동차가 최적의 운전조건이 될 수 있도록 자동차관련 시스템의 관리를 철저하게 해야한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.421-422
• /
• 2002

The purpose of this paper is to investigate the leakage characteristics of the valve stem in the gasoline engines. Especially, three factors affecting oil leakage are the power cylinder, engine head system, and the positive crankcase ventilation system. Which is the most variables, analysis difficulty is the valve stem seal characteristics. The testing system is used with oil motoring system. The leakage of an engine is analyzed for the cylinder temperature, atmosphere pressure, positive pressure, negative pressure, revolution of the camshaft and the surface roughness of the valve stem.

• Tribology and Lubricants
• /
• 제15권4호
• /
• pp.297-303
• /
• 1999

O-rings in automotive engines are important components such as a coolant pipe, engine oil circulating lines and fuel injector for sealing that makes efficient performance of the engine. Life cycle of O-rings is effected in environments of the O-ring seal, like that applied pressure, working temperature, precompressed ratio and materials. It is related in extrusion, expansion and fatigue failure of O-rings. In this paper, an pressurized, compressed elastomeric O-ring inserted into a rectangular groove is analysed numerically using the nonlinear finite element method. The calculated FEM results showed that extrusion ratio and contact stress are strongly related to the gap clearance and edge radius of the groove.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.1-6
• /
• 2007

본 논문은 LPG 엔진에서 밸브스템의 표면거칠기가 오일 누설에 미치는 영향에 대한 실험적 결과를 제공하고자 한다. 밸브스템시일은 밸브스템과의 미세한 밀봉간극을 통해 유출하는 오일을 차단하기 위한 부품이다. 이들 두개의 부품사이에서 발생되는 밀봉성은 밸브스템과 밸브스템시일의 누유안전성과 수명연장에 관련된 중요한 요소이다. 본 실험결과에 의하면, 밸브스템의 표면거칠기를 중심선 표면거칠기, Ra로 나타낼 경우 $0.4{\sim}0.5{\mu}m$가 최적의 가공조건이고, 표면의 거칠기 단면형상은 균일하게 분포되도록 가공하는 것이 가장 이상적인 설계조건이 될 것이다. 기본적으로 매끄러운 밸브표면과 균일하게 분포된 거칠기 형상을 유지하는 것이 밸브스템과 밸브스템 시일장치의 간극을 통해 빠져나가는 누유량을 줄일 수 있다.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.95-101
• /
• 2012

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. The canned type electric water pump without mechanical sealing elements was selected to meet the requirements for operational reliability and life. However, the electric water pump for internal combustion engine generates much more heat loss than for hybrid electric vehicle since it is operated by the electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump as an inverter integrated water pump has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of $125^{\circ}C$, water pump speed of 6000 rpm, coolant temperature of $106^{\circ}C$ and coolant flow rate of 120 L/min was used as a standard condition. Therefore, flow fields and temperature distribution inside the water pump were obtained. Also, we checked the feasibility of the canned type for the electric water pump in comparison with the mechanical seal type.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.191-196
• /
• 2005

A full-bead of multi-layer-steel (MLS) engine head gasket is used to seal the combustion gas. Finite element analyses were conducted to assess the dependence of the sealing performance of full-bead on the forming process consisting of embossing and flatting operations. It is demonstrated that the sealing performance is enhanced with more severe deformation of the bead plate during the embossing, i.e., with the increase in the punching depth, the punch height, the punch width and the friction coefficient of the bead plate against the punch and die, and with the decrease in the width of die cavity. Meanwhile, the flatting process that is employed to adjust the height of the embossed full-bead has no influence on the sealing performance.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.207-212
• /
• 2004

Full-beads of multi-layer steel engine head gaskets that are used to seal the combustion gas between the head and the block are subject to cyclic bending stresses due to the variation of the head/block gap during engine operation. The S-N curve for the fatigue durability assessment of the full-bead formed on NBR-coated SUS301 thin plate is deduced from the axial fatigue test results because of the difficulty in conducting the bending fatigue test of thin plate. The experimental verification of the deduced S-N curve is presented. It is shown that the NBR coating increases the endurance limit of the plate significantly. Mechanism of crack nucleation and propagation in the full-bead is discussed with photographs of the fatigue cracks.