• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.234-240
• /
• 2003

Hardened cement pastes of OPC which contains 10 wt% CSA type expansive additives were immersed in aqueous solution of 10 wt% MgS $O_4$.7$H_2O$ and then investigated by compressive strength, XRD. SEM and DSC etc.. According to the results including the hydration products and the microstructure of the hardened paste, the case of CSA type expansive additives［No. 6(C/(equation omitted) : 2.29, A/(equation omitted) : 0.16)] prepared from raw materials increased the resistance to $Mg^{2＋}$, S $O_4$$^{2-}$ ion diffusion than that of OPC paste due to the densification by the formation of fine ettringite in the first stage and the hydrates according to $\beta$-C$_2$S hydration in the late period.

• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.412-425
• /
• 2021

Because austenitic stainless steel causes localized corrosion such as pitting and crevice corrosion in environments containing chlorine, corrosion resistance is improved by surface treatment or changes of the alloy element content. Accordingly, research using cyclic potentiodynamic polarization experiment to evaluate the properties of the passivation film of super austenitic stainless steel that improved corrosion resistance is being actively conducted. In this investigation, the electrochemical properties of austenitic stainless steel and super austenitic stainless steel were compared and analyzed through cyclic potentiodynamic polarization experiment with varying temperatures. Repassivation properties were not observed in austenitic stainless steels at all temperature conditions, but super austenitic stainless steels exhibited repassivation behaviors at all temperatures. This is expressed as α values using a relational formula comparing the localized corrosion rate and general corrosion rate. As the α values of UNS S31603 decreased with temperature, the tendency of general corrosion was expected to be higher, and the α value of UNS N08367 increased with increasing temperatures, so it is considered that the tendency of localized corrosion was dominant.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.465-473
• /
• 2013

Objectives: This study was undertaken to analyze Staphylococcus aureus from cultivation environments for agricultural products and to confirm antibiotic resistance and enterotoxin genes for the isolated S. aureus. Methods: A total of 648 samples were collected from apple, peach, ginseng and balloon flower farms. S. aureus was isolated from soil, agricultural water, personal hygiene elements (hands, gloves and clothes) and work utensils (boxes). Results: S. aureus was detected in a total of 25 samples and 72 strains were isolated. The resistance rate of the isolated S. aureus strains was confirmed at 33.3%, with 24 resistant strains among the total of 72. Fourteen different patterns types were found, and three pattern types (NV, OX, VA) were confirmed most frequently. As result of the detection of enterotoxin gene type, four gene types (sea: 1, sed: 4, seg: all isolated S. aureus, sei: all isolated S. aureus) were analyzed among a total of nine types. Conclusions: This study demonstrates that personal hygiene techniques should be properly managed, such as washing and sterilization before or after work, because agricultural contamination by S. aureus frequently developed through improper management.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.153-153
• /
• 2016

Aluminum alloys have poor corrosion resistance compared to the pure aluminum due to the additive elements. Thus, anodizing technology artificially generating thick oxide films are widely applied nowadays in order to improve corrosion resistance. Anodizing is one of the surface modification techniques, which is commercially applicable to a large surface at a low price. However, most studies up to now have focused on its commercialization with hardly any research on the assessment and improvement of the physical characteristics of the anodized films. Therefore, this study aims to select the optimum temperature of sulfuric electrolyte to perform excellent corrosion resistance in the harsh marine environment through electrochemical experiment in the sea water upon generating porous films by variating the temperatures of sulfuric electrolyte. To fabricate uniform porous film of 5083 aluminum alloy, we conducted electro-polishing under the 25 V at $5^{\circ}C$ condition for three minutes using mixed solution of ethanol (95 %) and perchloric (70 %) acid with volume ratio of 4:1. Afterward, the first step surface modification was performed using sulfuric acid as an electrolyte where the electrolyte concentration was maintained at 10 vol.% by using a jacketed beaker. For anode, 5083 aluminum alloy with thickness of 5 mm and size of $2cm{\times}2cm$ was used, while platinum electrode was used for cathode. The distance between the two was maintained at 3 cm. Afterward, the irregular oxide film that was created in the first step surface modification was removed. For the second step surface modification process (identical to the step 1), etching was performed using mixture of chromic acid (1.8 wt.%) and phosphoric acid (6 wt.%) at $60^{\circ}C$ temperature for 30 minutes. Anodic polarization test was performed at scan rate of 2 mV/s up to +3.0 V vs open circuit potential in natural seawater. Surface morphology was compared using 3D analysis microscope to observe the damage behavior. As a result, the case of surface modification presented a significantly lower corrosion current density than that without modification, indicating excellent corrosion resistance.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.75-83
• /
• 2014

Suction bucket foundation is installed with the differential pressure created by pumping water out of bucket. Bucket foundation has usually been utilized in mooring anchor for offshore platform or floating oil and gas production facilities in the open sea. After suction bucket foundation successfully was applied as the foundation for offshore wind turbines in Europe, it recently attracts much attention in Korea, too. To estimate the penetration resistance of the suction bucket foundation is one of the important matters that should be considered during its installation. This study carried out a series of model tests to investigate the penetration resistance of suction bucket foundation. And the mobilized soil strength factor was reviewed through comparing the experimental results by two installation ways (e.g., push-in-load and suction) and the results calculated by the conventional equation.

• Corrosion Science and Technology
• /
• v.16 no.2
• /
• pp.49-58
• /
• 2017

Many research efforts on the effect of nitrogen on the corrosion resistance of stainless steels have been reported, but little research has been conducted on the effect of nitrogen for the weldment of stainless steels by the seal-weld method. Therefore, this work focused on the determining the corrosion resistance of tube/tube sheet mock-up specimen for sea water condensers, and elucidating the effect of shielding nitrogen gas on its resistance. The pitting corrosion of autogenously welded specimen propagated preferentially along the dendritic structure. Regardless of the percent of shielding nitrogen gas, the analyzed nitrogen contents were very much lower than that of the bulk specimen. This can be arisen because the nitrogen in shielding gas may partly dissolve into the weldment, but simultaneously during the welding process, nitrogen in the alloy may escape into the atmosphere. However, the pitting resistance equivalent number (PREN) of the interdendrite area was higher than that of the dendrite arm, regardless of the shielding gas percent; and the PREN of the interdendrite area was higher than that of the base metal; the PREN of the dendrite arm was lower than that of the base metal because of the formation of (Cr, Mo) rich phases by welding.

• The Korean Journal of Emergency Medical Services
• /
• v.2 no.1
• /
• pp.26-35
• /
• 1998

This study was to exhibit the effective emergency care method for the drowning and non-drowning who are reached two-thousand peoples every year in our country. For investigate the effective emergency care, this study was discussed as follows ; Pathophysiology of the water submersion, Fresh-water & sea-water drowning, Factors affecting survival, and Prehospital management. The conclusions from this study were summarized as follows; 1. Remove the patient from the water. If you suspect neck or spinal injuries, Always support the head and neck level with the back and, begin rescue breathing. 2. Maintain the airway and support ventilation in the water use the jaw-thrust technique to avoid farther injury to the neck or spine. We might encounter more resistance to ventilations than you expect because of water in the airway. Once you have determined that there are no foreign objects in the airway, apply ventilations with more force; adjust ventilations until you see the patient's chest rise and fall but not until you see gastric distention. Do not attempt to remove water from the patient's lungs or stomach. 3. If there is no pulse, begin CPR. 4. Administer high-flow supplemental oxygen; suction as needed. 5. Once the patient is breathing and has a pulse, assess for hemorrhage; control any serious bleeding that you find. 6. Cover the patient to conserve body heat, Handle the patient very gently, and, Transport the patient as quickly as possible to Emergency Department, Continuing resuscitative measures during transport. If the patient have the hypothermia, follow hypothermia management.

• Journal of fish pathology
• /
• v.15 no.1
• /
• pp.25-35
• /
• 2002

Effects of medicinal herb extract on nonspecific immune responses, hematology and disease resistance against Edwardsiella tarda in olive flounder, Paralichthys olivaceus were evaluated. Wormwood, Artemisia asiatica NAKAI and barrenwort, Epimedium koreanum NAKAI were mixed at a ratio of 7 : 3 (w/w) for 2-herbs extract and wormwood, barrenwort, Korean forsythia, Forsythia koreana NAKAI, chrysanthemum, Chrysanthemum zawadskii var. latilobum KITAMURA, peppermint, Mentha arvensis L. var, piperascens MALINV., great burnet, Snaguisorba afficinalis L., Lizard tail. Saururus chinensis BAILL., mulberry, Morus alba L., and star anise, Illicium varum HOOK, f, at the same weight for 9-herbs extract. Two-herbs of 9-herbs extract were prepared by heating after adding 10㎖ of distilled water per g of the herb mixtures. Fish (10.3$\pm$2.5g) were fed the experimental diets supplemented with the 2-herbs or 9-herbs extract at the different concentrations of 0%, 0.1%, 0.5% and 1% per kg diet for 12 weeks. Lysozyme and bactericidal activities of serum, and hematological characteristics were examined during experimental period. After feeding test period, all experimental groups were challenged with E. tarda. Lysozyme activity from the fish fed the diet supplemented with 0.1% or 0.5% of 2-herbs extract was significantly higher than the control. But there was no difference both in bactericidal activity and hematology among each group. Sixty seven % of relative percent survival values (RPS) in the group fed the diet supplemented with 0.1% of 2-herbs was higher than the other group and the control. These results suggest that supplenmentation of 0.1% of 2-herbs extract to a commercial diet may enhance disease resistance in olive flounder. Although both 0.1% and 0.5% 9-herbs extract did not improve non-specific immune reponses, they could enhance disease resistance of 53% RPS, respectively.

• Advances in concrete construction
• /
• v.6 no.4
• /
• pp.345-362
• /
• 2018

In this paper, mechanical and short-term durability properties of fly ash and slag based geopolymer concretes (FAGPC-SGPC) were investigated. The alkaline solution was prepared with a mixture of sodium silicate solution ($Na_2SiO_3$) and sodium hydroxide solution (NaOH) for geopolymer concretes. Ordinary Portland Cement (OPC) concrete was also produced for comparison. Main objective of the study was to examine the usability of geopolymer concretes instead of the ordinary Portland cement concrete for structural use. In addition to this, this study was aimed to make a contribution to standardization process of the geopolymer concretes in the construction industry. For this purpose; SGPC, FAGPC and OPC specimens were exposed to sulfuric acid ($H_2SO_4$), magnesium sulfate ($MgSO_4$) and sea water (NaCl) solutions with concentrations of 5%, 5% and 3.5%, respectively. Visual inspection and weight change of the specimens were evaluated in terms of durability aspects. For the mechanical aspects; compression, splitting tensile and flexural strength tests were conducted before and after the chemical attacks to investigate the residual mechanical strengths of geopolymer concretes under chemical attacks. Results indicated that SGPC (100% slag) is stronger and durable than the FAGPC due to more stable and strong cross-linked alumina-silicate polymer structure. In addition, FAGPC specimens (100% fly ash) showed better durability resistance than the OPC specimens. However, FAGPC specimens (100% fly ash) demonstrated lower mechanical performance as compared to OPC specimens due to low reactivity of fly ash particles, low amount of calcium and more porous structure. Among the chemical environments, sulfuric acid ($H_2SO_4$) was most dangerous environment for all concrete types.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.1
• /
• pp.33-38
• /
• 2010

Emerging of antibiotic resistance of pathogenic bacteria is now a very serious problem in the clinics to treat the diseases, which have been easy to cure by antibiotic treatments before. Unfortunately, antibiotics developed till now are not effective any more against the resistant bacteria. Lots of efforts to discover new antibiotics having novel and unique structures and functions are really urgent and undergoing in the whole world. In this study, we tried to screen and isolate Same unique bacterial strains producing antibacterial substances from the sea water, which is the poor environment for bacteria 10 make their growing. Three bacterial strains among 916 strains isolated showed inhibition clear zone on the marine agar plate growing pathogenic bacteria including Acinetobacter baumannii, Edwardsiella tarda, Pseudomonas aeruginosa, Staphylococcus aureus, Salmonella enterica. One of them, which was identified as Bacillus sp. DH-9 from 16S rRNA gene analysis, showed especially considerable antibacterial activity against S. aureus which is notorious for methicillin resistant S. aureus (MRSA). The growth of S. aureus was totally inhibited when the supernatant of Bacillus sp. DH-9 culture was treated on.