• 제목/요약/키워드: Sea water resistance

Search Result 211, Processing Time 0.029 seconds

Preparation of ZnO nanorods by hydrothermal method and their $NO_2$ sensing characteristics (수열합성법을 이용한 ZnO 나노로드의 제조 및 이산화질소 감응 특성)

  • Cho, Pyeong-Seok;Kim, Ki-Won;Lee, Jong-Heun
    • Journal of the Korean Vacuum Society
    • /
    • v.15 no.5
    • /
    • pp.506-511
    • /
    • 2006
  • ZnO nanorods were prepared by the hydrothermal reaction of a solution containing $Zn(NO_3)_2{\cdot}6H_2O$, NaOH, cyclohexylamine, ethanol and water, and their $NO_2$ and CO sensing behaviors were investigated. By the control of water concentration in solution, the morphology and agglomeration of ZnO nanorods could be manipulated, which is associated with the variation of $[OH^-]$ resulted from an interaction between water and cyclohexylamine. Sea-urchin-like and well-dispersed ZnO nanorods were prepared at low and high water content, respectively. Well-dispersed ZnO nanorods showed 1.8 fold change in resistance at 1 ppm $NO_2$ while there was no significant change in resistance at 50 ppm CO. This selective detection of $NO_2$ in the presence of CO can be used in automated car ventilation systems.

Characteristics of Vibrio mimicus K-1 Isolated from Coastal Sea Water (연안 해수에서 분리된 Vibrio mimicus K-1의 특성)

  • KOH Byeong-Ho;LEE Won-Jae;LEE Myung-Suk
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.27 no.3
    • /
    • pp.292-298
    • /
    • 1994
  • An environmental study was done to examine the distribution of Vibrio mimicus in aquatic environments of Kwangan and Minrak beach, Pusan, Korea. Moreover, both bacteriological characteristics and lethal effects of isolated V. mimicus were observed. Sea water samples were collected monthly from January to September, 1993, and quantitatively analyzed for V. mimicus. This organism was isolated from April(water temperature was $16.3^{\circ}C$), whereas it was not isolated when the water temperature fell below $15^{\circ}C$. V. mimicus counts were not remarkably high, however this study at least describes the distribution and occurrence of the possible highest density in aquatic environments of this region. Among the confirmed V. mimicus strains, the author chose the strongest antibiotic resistant bacterium and named it V. mimicus K-1. This strain has antibiotic resistance to colistin, erythromycin, tetracycline, and penicillin, and most isolates had a higher level of antibiotic resistance than V. mimicus ATCC 33653. The optimum growth for V. mimicus K-1 was observed at $37^{\circ}C$, pH 7.5, and $1\%$ NaCl, respectively. This organism was mostly inactivated by Ultra Violet irradiation (30W, $50^{\circ}C$) for 70 seconds and death lethality increased in proportion to treatment temperature ($D_{50}=5.7min,\;D_{60}=\;2.1min,\;and\;D_{70}=0.7min$).

  • PDF

Effect of Annealing Heat Treatment to Corrosion Resistance of a Copper (구리의 내식성에 미치는 어닐링 열처리의 영향)

  • Kim Jin-Kyung;Moon Kyung-Man;Lee Jin-Kyu
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.29 no.6
    • /
    • pp.654-661
    • /
    • 2005
  • Copper is a well known alloying element that is used to improve the resistance to general corrosion of stainless steel And also Cu cation have the anti-fouling effect to inhibit adhesion of the marine algae and shellfish to the surface of heat exchanger cooling pipe or outside wall of the ship, Therefore there are some anti-fouling methods such as anti-fouling Paint mixed with copper oxide or MGPS(Marine Growth Preventing System) by using Cu cation dissolved to the sea wather solution. Cu cation can be dissolved spontaneously by galvanic current due to Potential difference between Cu and cooling pipe of heat exchanger with Ti material, which may be one of the anti-fouling designs. In this study the effect of annealing heat treatment to galvanic current and Polarization behavior was investigated with a electrochemical points of view such as measurement of corrosion Potential, anodic polarization curve. cyclic voltammetric curve, galvanic current etc The grain size of the surface in annealed at $700^{\circ}C$ was the smallest than that of other annealing temperatures. and also the corrosion Potential showed more positive potential than other annealing temperatures. The galvanic current between Ti and Cu with annealed at $700^{\circ}C$ was the largest value in the case of static condition. However its value in the case of flow condition was the smallest than the other temperatures. Therefore in order to increase anti-fouling effect by Cu cation, the optimum annealing temperature in static condition of sea water is $700^{\circ}C$, however non- heat treated specimen in the case of flow condition may be desirable.

Elasticity of the Funnel Ribs and Hydrodynamic Characteristics on the Sea Eel Pots (장어통발의 깔대기 탄성과 유체역학적 특성)

  • Kim, Yong-Hae;Ha, Jeong-Sik
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.23 no.4
    • /
    • pp.157-162
    • /
    • 1987
  • The basic experiments on the plastic sea eel pots used in fishing were carried out in order to investigate the elasticity of the funnel ribs, hydrodynamic resistance, sinking time and diffusion of the bait from June to October, 1987. The elasticity of the bamboo funnel ribs was higher than that of the polypropylene ribs up to the load 150g. The hydrodynamic resistance R (kg) of the pots towing to the head direction horizontally in relation to towing velocity V (m/sec) was expressed as following formula; R=0.36V super(2.01) and coefficient of drag C sub(D) was 0.52. The sinking times of the covered pots by tape fully or partially were late 1-2 second than the typical pots within the water depth 7.5m. The diffusion tendency through the covered pots using dye and sardine extracts solution was concentrated to the entrance more than the typical pots. However, fishing efficiency as number and weight of fish per pots for nine times fishing operation was revealed no difference between the covered pots and the typical pots.

  • PDF

해양환경하에서의 알루미늄 합금 선박용 재료의 기계적 특성과 전기화학적 특성 평가

  • 김성종;고재용;정석기;김정일
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2005.05a
    • /
    • pp.161-165
    • /
    • 2005
  • Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

  • PDF

Studies on Ventilation Control for a Ventilated Supercavitating Vehicle (분사형 초공동 수중운동체의 가스 분사량 제어 연구)

  • Kim, Seonhong;Kim, Nakwan
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.52 no.3
    • /
    • pp.206-221
    • /
    • 2015
  • Supercavitation is a modern technique which can be used to surround an underwater vehicle with a bubble in order to reduce the resistance of the vehicle. When the vehicle is at low speed in the deep sea, the cavitation number is relatively big and it is difficult to generate a cavity large enough to envelope the vehicle. In this condition, the artificial cavity, called ventilated cavity, can be used to solve this problem by supplying gas into the cavity and can maintain supercavitating condition. In this paper, a relationship between the ventilation gas supply rate and the cavity shape is determined. Based on the relationship a ventilation rate control is developed to maintain the supercavitating state. The performance of the ventilation control is verified with a depth change control. In addition, dynamics modeling for the supercavitating vehicle is performed by defining forces and moments acting on the vehicle body in contact with water. Simulation results show that the ventilation control can maintain the supercavity of an underwater vehicle at low speed in the deep sea.

Numerical Analysis on Body Temperature Change with Heating Life Vest (발열구명동의 착용에 의한 인체의 체온변화에 관한 수치해석)

  • Kim, Myoung-Jun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.14 no.3
    • /
    • pp.241-245
    • /
    • 2008
  • The characteristics of temperature profile around human body with heating life vest at sea were investigated in this paper. Especially, the temperature profile of human body was numerically calculated by finite difference method with Mathcad. The main parameters were seasonal mean sea water temperature, heating amount and heating duration time of heating life vest. In this paper, the boundary layer was composed by the difference matters, and the thermal conductivity was calculated with an adjacent cells using thermal resistance method. It was clarified that the body temperature was kept highly and the risk of death from hypothermia was reduced by wearing heating life vest.

  • PDF

The Evaluation of Surface Scaling and Resistance of Concrete to Frost Deterioration with Freezing-Thawing Action by Salt Water (염화물이 함유된 동결수의 동결융해 작용에 따른 콘크리트의 내동해성과 표면열화 평가)

  • Kim, Gyu-Yong;Kim, Moo-Han;Cho, Bong-Suk;Lee, Seung-Hoon
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.11 no.6
    • /
    • pp.143-151
    • /
    • 2007
  • This study presents the experimental results of frost durability including resistance to freezing-thawing and surface scaling of concrete. Mixing design was proportioned with the various water-binder ratio between 0.37 and 0.47 and three different binder compositions corresponding to Type I cement without any supplementary cementitious materials(OPC), Type II cement with 50% blast-furnace slag replacement(BFS50), and ternary cement with Type III cement, 15% fly ash, and 35% slag replacement (BFS35%+FA15%). Test results showed that the mixing design with BFS50% and BFS35%+FA15% exhibited higher durability factor than that made with OPC only. Finally, the use of blend cement containing slag can be used effectively in terms of frost durability of the concrete exposed to severe condition under coastal environment like as flying salt, sea water spray, etc.

Studies on Anisakis Type Larvae (Anisakis 형(型) 유충(幼蟲)에 관한 연구(硏究))

  • Lim, Jung Teck
    • Korean Journal of Veterinary Research
    • /
    • v.15 no.2
    • /
    • pp.293-307
    • /
    • 1975
  • As it has been known recently that anisakis type larvae harbouring in marine fishes are a causal agent of zoonosis to human and probably to land living mammal animals, attention was focused on the study on the larvae in an aspect of epidemiology or epizootiology. The present work was conducted from 1966 to 1975 for i) survey on the harbouring status of anisakis type larvae in marine fishes of this country, ii) observation on the response to the experimental infestation of the larvae to the pigs, in the reason that they could well fetid raw fish viscera occasionally containing the larvae as a high protein source of swine food, and iii) observation on the larval resistance and response to vermicidal agents for the purpose of prevention of the larval infection to the mammal animals. The data obtained in the studies were summarized as follows: 1. In the survey on the status of larvae harbouring in main species of marine fishes of this country, 15 species, a total of 1,940 fishes, were observed and the result was summarized in table 2. Average number of larvae, in upper rank of 5 out of all 15 species of fishes, were as highest as 156 larvae ranging 74 to 450 in Pseudosciaena manchurica (chamjogi), 54.5 ranging 15 to 240 in Trichiurus haumela (kalchi), 35.6 ranging 8 to 112 in Trachurus japonica (junggengi), 30.6 ranging 4 to 65 in Parapristipama trilineatum (benjari) and 20.5 ranging 3 to 48 in Nibea argentata (boguchi) respectively. In morphological observation, size of the larvae in the fishes were varied, ranging from 2 to 32mm long, and a tendency to larger size and number of larvae in the fishes, which were wider sea migration, higher age and lager bodily size, was observed The favorite places harbouring the larvae in fishes were mainly around the intraperitoneal viscera such as mesentery, omentum, liver, pyloric suspensory, fat tissue and cloaca, and rarely in body muscles of fish. Fishes heartily infested with the larvae showed stunted growth decreased egg formation and severe damage of liver. 2. In the experimental infestation of the larvae to normal pigs, as illustrated in table 3, a group with large dose of larvae (a total of 1,800 larvae, 300 larvae Per dose, twice in a dart for 3 days) showed acute clinical syndrome terminatine death with a week course, whereas two groups with less dose of larvae (a total of 180~360 larvae, 10 larvae per dose, at 5 days interval for 70~180 days) showed subclinical syndrome with remarkably stunted growth as. much as approximately one half of body size in contest to the control pigs. In the pathological findings, a group with large dose of larvae showed macroscopically larvae penetrating to the gastric wall with severe gastroenteritis, and histopathologically various acute lesions caused by active larvae penetration into the wall of stomach and interstine, whereas two groups with less dose of larvae showed chronic lesions such as hypertrophy and verminous granulomatous swelling of gastric wall, suggesting strongly the possibility of natural infestation of larvae to swine. 3. In the resistance of the larvae to the chemical solutions, the larvae tolerated for 2 days in 15 percent solution of sodium chloride and acetic acid, and for 7 days in 70 percent solution of ethyl alcohol. In the resistance to the temperature, the larvae died within 1 second at $62^{\circ}C$ and tolerated for 24 hours at $-3^{\circ}C$, 12 hours $-5^{\circ}C$ respectively. 4. For the experiment on the vermicidal effect to larvae, general vermicidal drugs such as Neguvon, Combantrin, antimony Potassium, piperazine adipate and piperazine dihydrochloride, oxidizer such as potassium permanganate and potassium chlorate, and dyes such as gentian violet and crystal violet were used, and among them, as illustrated in table 6, potassium permanganate was proved as the best. In the successive test for the practical use of potassium permanganate, vermicidal effect in seawater solution of potassium permanganate and common-water solution of potassium permanganate were compared, and then retested by dipping the fish viscera including the larvae into the two different solutions of potassium permanganate. The result through these tests indicated that 0.01 percent common water and sea-water solution of potassium permanganate could be apparently recommended as a preventive vermicidal solution, having 90 to 100 percent vermicidal effect by dipping for 12 to 24 hours even though sea-water solution of potassium permanganate had a tendency to slightly less effect than the common-water solution of potassium permanganate (Table 8).

  • PDF

Study on Effects of Seawater Fouling on a Plate-Frame Heat Exchanger (해수 파울링이 판형 열교환기 성능에 미치는 영향에 대한 고찰)

  • Heo, Jaehyeok;Lee, Dong-Won;Kim, Min-Hwi;Baik, Wonkeun;Yun, Rin
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.29 no.8
    • /
    • pp.391-400
    • /
    • 2017
  • Understanding of seawater fouling characteristics is critical in designing a heat exchanger adapted in an effluent utilization system for a power plant. We reviewed three types of fouling mechanisms of general, biological, and crystallizing for a plate-frame heat exchanger, to be used for heat exchanging with heated effluent from a power plant. Also, mathematical models for each type of seawater fouling were suggested. Actual thermal resistance calculated from seawater fouling models were compared and implemented in designing a plate-frame heat exchanger. The bio-fouling model revealed the largest thermal resistance and the highest number of plates for a plate-frame heat exchanger under the same heat load. Overall heat transfer coefficient and pressure drop of a plate-frame heat exchanger under fouling conditions was lower by 58 percent and higher by 2.85 times than those under clean conditions, respectively.