• Journal of the Korean Institute of Navigation
• /
• v.5 no.1
• /
• pp.25-35
• /
• 1981

Since 1960 tankers and bulk carriers have rapidly increased in size up to 500, 000 dwt. in operating as main system of transportation for the international trade at sea, and studies are doing carried out by various groups with a view to increasing the size still further. However, the service speed of these ships has remained almost constant, and steering devices of them have nearly not changed, comparing with regular size of a dry cargo ship. This creats the dituation where stopping distance and advance are proportionally longer for larger ships. In case of collision at sea, these vessels have been arised some serious casualties, such as sinking, fire and oil pollution. This paper analyzers a study for the handling of super huge vessels to avoid collision at sea, basing on the results of the crash astern test and turning test of them.

• 한국기계연구소 소보
• /
• s.13
• /
• pp.123-141
• /
• 1984

The safety aspects of ship handing have become increasingly important recently, due to the changes in sea transportation. These are characterizes by larger units, increased traffic density on sea lane, sea transport of dangerous cargo, etc. In addition, as a economic aspect of ship handing, it has obtained an increased attention in connection with port development and consideration of allowable ship size for existing ports. One method for evaluation of maneuvering problems is simulation on a computer by means of a mathematical model of the ship maneuvering motion. The present report describes the elements of a mathematical model for ship maneuvering and gives some results of maneuvering predictions through the simulation.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2015

Increasing ozone concentrations are observed over Japan from year to year. One cause of high ozone concentration in the Kanto region, which includes areas inland from large coastal cities such as metropolitan Tokyo, is the transportation of precursors by sea breezes. However, high ozone concentrations are also observed in the morning, before sea breezes approach inland areas. In this point, there would be a possibility of residual ozone existing above the nocturnal boundary layer affects the ozone concentration in the following morning. In this study, we utilized the Weather Research and Forecasting model and the Community Multiscale Air Quality model to evaluate the effect of regional precursors and residual ozone on ozone concentrations over the inland Kanto region. The results show that precursors emitted from non-metropolitan areas affected inland ozone concentrations more than did precursors from metropolitan areas. Moreover, calculated results indicate downward transportation of residual ozone, resulting in increased concentration. The residual ozone was also affected by precursors emitted from non-metropolitan areas.

• Journal of Navigation and Port Research
• /
• v.39 no.2
• /
• pp.131-140
• /
• 2015

The main aim of this paper, via the method of statistical data analysis, is to analyze the current situation of the shipping industry and policies of the shipping industry in Vietnam. Section 1 gives some key information about the current situation of the shipping industry in Vietnam such as: shipping companies and their fleets, seafarers and ports. In view of the many restrictions faced by the Vietnamese shipping industry, section 2 is used to disclose the policies issued by the Vietnamese government in order to help the domestic maritime industry develop further in the near future, and the outcomes of implementing these policies. Besides the fact that some of the measures were feasible and reasonable, some others were not as effective as they were supposed to be, or in fact the initial forecast of their effectiveness was far-fetched. In the last section, after analyzing reasons for the failures, the author proposes that focusing on coastal transportation routes, fleet and port restructuring and skilled labour training were truly necessary to the development of the industry in the immediate period. Furthermore, this paper is also expected to provide a basic foundation for further research by the authors about 'the strategical approach for the development of shipping industry in developing countries: a case of Vietnam' in the near future.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.43-63
• /
• 1996

The purpose of this study is to find out what is the functional role of VTS in order to get the people concerned with marine traffic/transportation understand about VTS. VTS could be described as the essential risk management system in both cost effective on cost-benefit analysis and the sea space or time management at port, coastal environment. The important role of the VTS are those functions such as the decision making infrastructure, the passive/active safety measures at sea. VTS could not control/regulate marine traffic as strong as ATC(Air Traffic Control) owing to the marine traffic characters. However, the right and responsibility of VTS finally are belong to the master, pilot and mariners. For the benefit of the electronic technology development, VTS system also cloud be upgraded to communication system from information system. In connection with these system upgrading, the right and responsibility of VTS/staff should be supported by domestic legal system. The followings are presented for VTS to be effective. First, the cooperation and understanding of VTS between the peoples concerned with marine traffic/transportation are essential. Because they are all data supplier and also information consumers. Second, VTS staff/regulator should be selected, educated, trained accordingly as per their career, ability, quality, qualification, certification and etc. Third, the port reliability from VTS users depends on the factors such as economic interests, safety and effectiveness/efficiency of VTS.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.317-324
• /
• 2010

Marine transportation by ships is characterized by remote, large-volume and lower rates than the others carry system. Ships account for over 80% of all international trading, and marine transportation is an internationally competitive, strategic, and great national important industry. The construction of larger and faster ships has brought about many problems such as cavitations and erosion corrosion. Cavitations and erosion corrosion make damages on materials and leads to break down members due to continuous physical contacts with shock waves and fluids from the generation and extinction of air bubbles in sea water vortex. The steel used for ship constructions was spray-coated with Al wire, and additionally sealed with fluorine silicone sealing material. Results of experiment, corrosion resistance of sealed thermal spray coating was improved, however in cavitation resistance, the large effect was not appeared. Accordingly, this study applied for thermal spray coating to provide better electrochemical characteristics and corrosion resistance in marine environment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.364-379
• /
• 2019

Wave-induced ship motion and load responses are usually investigated on the assumption that the incident waves are long-crested. The realistic sea waves are however short-crested irregular waves. Real practice reveals that the ship motion and load responses induced by short-crested waves are different from those induced by long-crested waves. This paper aims to conduct a comprehensive study on ship motions and loads in different wave fields. For this purpose, comparative studies by small-scale model towing tank test and large-scale model sea trial are conducted to experimentally identify the difference between ship motions and loads in long-crested and short-crested irregular waves. Moreover, the influences of directional spreading function of short-crested waves on ship motions and loads are analyzed by numerical seakeeping calculation. The results and conclusions obtained from this study are of great significance for the further extrapolation and estimation of ship motions and loads in short-crested waves based on long-crested wave response results.

• Journal of the korean society of oceanography
• /
• v.39 no.1
• /
• pp.57-71
• /
• 2004

Based on the data obtained under the China-Korea joint project (1997-2001) and historic observations, the distribution, transportation and sedimentation of sediment in the southern Yellow Sea (SYS) are discussed, and the controversial formation mechanism of muddy sediments is also explored. The sediment transport trend analysis indicates that the net transport direction of sediment in the central SYS (a fine-grained sediment deposited area) points to $123.4^{\circ}E,\;35.1^{\circ}N$, which is a possible sedimentation center in the central SYS. The sediment transport pattern is verified by the distribution of total suspended matter (TSM) concentration and ${\delta}^{13}C$ values of particulate organic carbon (POC), the latter indicates that the bottom water plays a more important role than the surface water in transporting the terrigenous material to the central deep-water area of the SYS, and the Yellow Sea circulation is an important control factor for the sediment transport pattern in the SYS. The carbon isotope signals of organic matter in sediments indicate that the Shandong subaqueous delta has high sedimentation rate and the deposited sediments originate mainly from the modern Yellow River. The terrigenous sediments in deep-water area of the SYS originate mainly from the old Yellow River and the modern Yellow River, and only a small portion originates from the modern Yangtze River. The analytical results of TSM and stable carbon isotopes are further confirmed by another independent tracer of sediment source, polycyclic aromatic hydrocarbons (PAHs). Five light mineral provinces in the SYS can be identified and they indicate inhomogeneity in sources and sedimentary environment. The modern shelf sedimentary processes in the SYS are controlled by shelf dynamic factors. The muddy depositional systems are produced in the shelf low-energy environments, which are controlled by some meso-scale cyclonic eddies (cold eddies) in the central SYS and the area southwest of the Cheju Island. On the contrary, an anticyclonic muddy depositional system (warm eddy sediment) appears in the southeast of the SYS (the area northwest of the Cheju Island). In this study, we give the cyclonic and anticyclonic eddy sedimentation patterns.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.5
• /
• pp.595-605
• /
• 2012

Fine particles ($PM_{2.5}$) were collected and analyzed from April 2010 through January 2011 in Chungju to investigate the characteristics of $PM_{2.5}$ and its ionic species. The annual mean concentrations of $PM_{2.5}$, ${SO_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ in the particulate phase were 40.84, 7.61, 7.14 and $3.74{\mu}g/m^3$, respectively. $PM_{2.5}$ concentrations were higher in fall and spring than in winter and summer. The elevated concentrations episodes are the main factor that enhanced the $PM_{2.5}$ concentrations in the fall. Among the major ionic species ${SO_4}^{2-}$ showed the highest concentration, followed by $NO_3{^-}$ and $NH_4{^+}$, $NO_3^-$ exhibited higher concentrations during the winter, but ${SO_4}^{2-}$ and $NH_4{^+}$ were not showed seasonal variation. The high correlations were found among $PM_{2.5}$, ${SO_4}^{2-}$, $NO_3{^-}$ and $NH_4{^+}$ during all seasons except for spring. The evaluation of backward trajectories and meteorological records show that the highest $PM_{2.5}$ concentration levels occurred during W-NW weather conditions, which influenced by the emission sources of China area. The low pollution levels generally occurred during E-S weather conditions, which influenced by the East Sea and south of the Yellow Sea. The elevated $PM_{2.5}$ mass concentrations arouse the concentration of $NO_3{^-}$, but no effects on ${SO_4}^{2-}$ and $NH_4{^+}$.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.104-108
• /
• 2009

As the demands of ocean resource development increase, many offshore structures are required. To cope with the active ocean developments, many types of construction methods have been applied for offshore facilities, including oil, gas and harbors. One of the challenges is to transport and install the heave bridge caisson. Several construction methods are well understood. However, for the sake of safety and reliability, the F/D installation method can be utilized. While the caisson is carried by an F/D, the mooring force of the tug boat and the structure stability from exiting motions in the dock should be checked against external loadings and sea conditions. The external loads can be classified with wind force, current force, and wave force. In the stability analysis, transportation velocity and draft of F/D are important factors. The dynamic stability and hook load for crane barge installation for the same caisson are also studied. Considering external loads and dominant factors, the stability of caisson during transportation has been investigated.