• Title/Summary/Keyword: Sea Field

Search Result 1,295, Processing Time 0.034 seconds

3-D Near Field Localization Using Linear Sensor Array in Multipath Environment with Inhomogeneous Sound Speed (비균일 음속 다중경로환경에서 선배열 센서를 이용한 근거리 표적의 3차원 위치추정 기법)

  • Lee Su-Hyoung;Choi Byung-Woong
    • The Journal of the Acoustical Society of Korea
    • /
    • v.25 no.4
    • /
    • pp.184-190
    • /
    • 2006
  • Recently, Lee et al. have proposed an algorithm utilizing the signals from different paths by using bottom mounted simple linear array to estimate 3-D location of oceanic target. But this algorithm assumes that sound velocity is constant along depth of sea. Consequently, serious performance loss is appeared in real oceanic environment that sound speed is changed variously. In this paper, we present a 3-D near field localization algorithm for inhomogeneous sound speed. The proposed algorithm adopt localization function that utilize ray propagation model for multipath environment with linear sound speed profile(SSP), after that, the proposed algorithm searches for the instantaneous azimuth angle, range and depth from the localization cost function. Several simulations using linear SSP and non linear SSP similar to that of real oceans are used to demonstrate the performance of the proposed algorithm. The estimation error in range and depth is decreased by 100m and 50m respectively.

Optimization of Array Configuration in Time Reversal Processing (시역전 처리에서 센서 배열 최적화에 관한 연구)

  • Joo, Jae-Hoon;Kim, Jea-Soo;Ji, Yoon-Hee;Chung, Jae-Hak;Kim, Duk-Yung
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.7
    • /
    • pp.411-421
    • /
    • 2010
  • A time-reversal mirror (TRM) is useful in diverse areas, such as reverberation ing, target echo enhancement and underwater communication. In underwater communication, the bit error rate has been improved significantly due to the increased signal-to-noise ratio by spatio-temporal focusing. This paper deals with two issues. First, the optimal number of array elements for a given environment was investigated based on the exploitation of spatial diversity. Second, an algorithm was developed to determine the optimal location of the given number of array elements. The formulation is based on a genetic algorithm maximizing the contrast between the foci and area of interest as an objective function. In addition, the developed algorithm was applied to the matched field processing with ocean experimental data for verification. The sea-going data and simulation showed almost 3 dB improvement in the output power at the foci when the array elements were optimally distributed.

Activity Changes in Phase II Drug-metabolizing Enzymes UDP-Glucoronosyl Transferase and Glutathione S-Ttansferase to Crude Oil Exposure in Mussel and Rockfish (원유의 노출이 담치와 조피볼락의 phase II 약물대사효소 UDP-glucoronosyl transferase 및 glutathione S-transferase의 활성에 미치는 영향)

  • Park Kwan-Ha;Kim Ju-Wan;Park Eum-Mi;Lim Chul-Won;Choi Min-Soon;Choe Sun-Nam;Hwang In-Young;Kim Jung-Sang
    • Environmental Analysis Health and Toxicology
    • /
    • v.21 no.2 s.53
    • /
    • pp.103-113
    • /
    • 2006
  • This study examined effects of crude oil on the phase II drug-metabolizing enzymes UDP-glucuronosyl transferase (UDPGT) and glutathione S-transferase (GST) in mussel Mytilus edulis and rockfish Sebastes schlegeli, a representative bivalve and a culture fish, respectively. This work also intended indirectly to evaluate the post impact recovery from the massive oil tanker spillage accidents occurred during the summer of 1995 in the sea area off Yosu City, Chonnam. For these, enzyme activities of UDPGT and GST were examined in the fish and mussel following laboratory exposure to fresh crude oil, weathered oil, field-obtained oil residues, or in the field biota samples. Decreased GST activity was observed in rock fish following exposure to oil-soluble fraction (OSF) of fresh oil. A similar diminished GST activity was also observed after OSF of artificially weathered oil. OSF of field oil residues retrieved from the spillage area approximately 1 year later also exerted a slight inhibition of GST to rockfish. There was neither a change in UDPGT in rockfish, nor were there changes in mussel in both enzymes to any oil fractions. We could not observe any difference in the two enzymes either in rockfish or mussel sampled from the field during $1.5{\sim}2.0$ years post spillage, indicating that their enzyme systems might had been recovered by the sampling time. In conclusion, it seems that the inhibition of GST activity in rockfish is a biomarker response to crude oil exposure. The results, however, must be interpreted with care, as the inhibition nay reflect various factors such as oil concentration, duration and water temperature.

Deposition of Aerosols on Leaves in a Cool-temperate Larch Forest in Northern Hokkaido, Japan

  • Tatsuya, Fukazawa;Naoto, Murao;Hisashi, Sato;Masahiro, Takahashi;Masayuki, Akiyama;Takashi, Yamaguchi;Izumi, Noguchi;Hiroyuki, Takahashi;Chikara, Kozuka;Rei, Sakai;Kentaro, Takagi;Yasumi, Fujinuma;Nobuko, Saigusa;Kazuhide, Matsuda
    • Asian Journal of Atmospheric Environment
    • /
    • v.6 no.4
    • /
    • pp.281-287
    • /
    • 2012
  • Aerosol concentrations at the CC-Lag site in the Teshio Experimental Forest increased from winter to spring and sometimes showed extremely high values associated with Kosa and/or forest-fire events. The range and mean of the mass concentrations of aerosol chemical species were as follows: total particulate mass, 1.2-29, 5.0; elemental carbon, 0.061-2.2, 0.43; organic carbon, 0.059-3.5, 0.79; and sulfate, 0.12-6.2, 1.8 ${\mu}g/m^3$. The total masses of the deposited particles on hybrid larch and on bamboo leaves were approximately 35 and 30 ${\mu}g/cm^2$, respectively. The amounts of soil particles on the leaves were 6 ${\mu}g/cm^2$ for the upper part of hybrid larch, 2 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 1 ${\mu}g/cm^2$ for Sasa bamboo leaves. The amounts of deposited black carbon were 2.3 ${\mu}g/cm^2$ for the upper part of hybrid larch, 0.6 ${\mu}g/cm^2$ for the lower part of hybrid larch, and 0.2 ${\mu}g/cm^2$ for Sasa bamboo leaves. Half of the total deposited particular mass was attached on the hybrid larch; however, most of the total deposited mass was adhered on the Sasa bamboo leaves. Regardless of the species, there tend to be more deposited particles on the leaves in the upper part than in the lower part, with only a few meters height difference. Comparing the composition of the deposited particles to that of the atmospheric aerosols without any size cut, the fractions of water-soluble material sulfate and sea salt in the deposited aerosols were about one tenth and one hundredth lower than that in the aerosols, respectively. On the basis of the measured concentration and the deposited amount on leaves, the deposition velocity of black carbon was estimated to be approximately 0.5 cm/s.

Numerical Simulation of Storm Surge and Wave due to Typhoon Bolaven of 2012 (2012년 태풍 볼라벤에 대한 폭풍해일과 파랑 수치모의)

  • Kim, Gun Hyeong;Ryu, Kyong Ho;Yoon, Sung Bum
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.32 no.4
    • /
    • pp.273-283
    • /
    • 2020
  • Numerical simulations of the storm surge and waves induced by the Typhoon Bolaven incident on the west sea of Korea in 2012 are performed using the JMA-MSM weather field provided by the Japan Meteorological Agency, and the calculated surge heights are compared with the time history observed at harbours along the various coasts of Korea. For the waves occurring coincidentally with the storm surges the calculated significant wave heights are compared with the data measured using the wave buoys operated by the Korea Hydrographic and Oceanographic Agency and the Korea Meteorological Administration. Additional simulations are also performed based on the pressure and wind fields obtained using the best track information provided by the Joint Typhoon Warning Center, and the calculated results are compared and analyzed. The waves and storm surges calculated using JMA-MSM wether field agree well with the observations because of the better reflection of the topography and the pre-background weather field. On the other hand, the calculated results based on the weather fields produced using the JTWC best track information show some limitations of the general trend of the variations of wave and surge heights. Based on the results of this study it is found that the reliable weather fields are essential for the accurate simulation of storm surges and waves.

Analysis of Reliability of Weather Fields for Typhoon Maemi (0314) (태풍 기상장의 신뢰도 분석: 태풍 매미(0314))

  • Yoon, Sung Bum;Jeong, Weon Mu;Jho, Myeong Hwan;Ryu, Kyong Ho
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.32 no.5
    • /
    • pp.351-362
    • /
    • 2020
  • Numerical simulations of the storm surge and waves induced by the Typhoon Maemi incident on the south sea of Korea in 2003 are performed using the JMA-MSM forecast weather field, NCEP-CFSR reanalysis weather field, ECMWF-ERA5 reanalysis weather field, and the pressure and wind fields obtained using the best track information provided by JTWC. The calculated surge heights are compared with the time history observed at harbours along the coasts of Korea. For the waves occurring coincidentally with the storm surges the calculated significant wave heights are compared with the measured data. Based on the comparison of surge and wave heights the assessment of the reliability of various weather fields is performed. As a result the JMA-MSM weather fields gives the highest reliability, and the weather field obtained using JTWC best track information gives also relatively good agreement. The ECMWF-ERA5 gives in general surge and wave heights weaker than the measured. The reliability of NCEP-CFSR turns out to be the worst for this special case of Typhoon Maemi. Based on the results of this study it is found that the reliable weather fields are essential for the accurate simulation of storm surges and waves.

Current Status of Registered Korean Patents Related to the Health Functional Food for Skin Care (피부미용 관련 건강기능식품 국내 특허 등록현황)

  • Chung, Kap-Taeck;Lee, Sang-Hyun
    • The Korean Journal of Food And Nutrition
    • /
    • v.25 no.2
    • /
    • pp.308-316
    • /
    • 2012
  • Proper skin care promotes good metabolism and the biological activity of skin, helps maintain the skin in a healthy and beautiful state when combined with nutritional nourishment. Health functional foods are being used for the purpose of enhancing efficient skin care. Health functional foods related to skin care maintain the epidermis, dermal fibroblast layer and subcutaneous tissue that form the skin. Efficient functional foods alleviate the signs of endogenous aging that come with getting older and exogenous aging caused by sunlight. Even though the field of skin care related to health functional foods has received less attention and been the subject of less research compared to functional cosmetics which are developing widely, this area of skin care that maintains and improves the layer of dermal fibroblast through the intake of food, is expected to progress with the commercialization of products in many fields when the related technical research development is galvanized and the related patents are applied for. Research into health functional foods related to skin care in Korea started rather late in comparison to other advanced countries where patents for relevant techniques have been applied for since 1990's together with research conducted on how they might be used for practical purposes. This study used the key words 'skin care, health functional food' to search for Korean patents that have been applied for at the Korean Intellectual Property Office from 1983 to 2011 using the KIPRIS database, in order to help researchers in the related fields by organizing the patented formulas for health functional foods for skin care which have gained attention recently. According to the number of registrations in each industry field, the total number of patents was 1,120 we screened the major patents among them, the field with the largest number was food foodstuff non-alcoholic beverage and preparation or treatment(A23L) with 135, then natural plant medicine & medical supplies and cosmetics(A61K) with 112, microorganisms or enzymes(C12N) with 63, heterocyclic compounds(C07D) with 44, horticulture or cultivation of sea weeds, forestry(A01G) 16 times, listed from the highest to the lowest number of applications. It has been revealed that food, foodstuff, non-alcoholic beverage and preparation or treatment(A23L) was the industry field where the most patents for health functional foods related to skin care were registered.

A Development of Data Management Platform for Shipboard Machinery Equipment to Share Maritime Field Data Exchange based on ISO 19847/19848 (ISO 19847/19848 기반 해상 필드 데이터 공유를 위한 선박 기관부 데이터 관리 플랫폼 개발)

  • Woo, Yun-Tae;Hwang, Hun-Gyu;Kim, Bae-Sung;Shin, Il-Sik;Jung, Hui-Sok;Park, Min-Sik;Lee, Jang-Se
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.22 no.12
    • /
    • pp.1577-1588
    • /
    • 2018
  • Recently, many researches are progressing to support the operation and maintenance works of vessels using analyzed result based on various information of equipment. The interfaces of communication equipment are standardized very well, but the interfaces of machinery and other parts are not standardized yet. For that reason, there has limitations for data exchange and management. To solve the problem, the ISO is establishing new standards which are ISO 19847 for shipboard data servers th share field data at sea and ISO 19848 for standard data for shipboard machinery and equipment. In this paper, we developed a data management platform for shipboard machinery equipment, and tested the field data exchanging using the developed platform based on the standards. To do this, we analyzed the requirements of the standards and related researches, and designed an architecture of shipboard data platform that satisfied the requirements. Also, we developed components of the designed platform architecture and verified the effectiveness for it.

Development of EvaGreen Based Real-time PCR Assay for Detection and Quantification Toxic Dinoflagellate Pfiesteria Piscicida and Field Applications (유독 와편모조류 Pfiesteria Piscicida 탐지 및 정량 분석을 위한 EvaGreen 기반 Real-time PCR기법 개발과 현장 적용)

  • PARK, BUM SOO;JOO, JAE-HYOUNG;KIM, MYO-KYUNG;KIM, JOO-HWAN;KIM, JIN HO;BAEK, SEUNG HO;HAN, MYUNG-SOO
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.22 no.1
    • /
    • pp.31-44
    • /
    • 2017
  • Pfiesteria piscicida is one of heterotrophic dinoflagellate having toxic metaboliges, and it is difficult to detect and quantify this dinoflagellate via light microscope due to small size and morphological similarity with Pfiesteria-like dinoflagellate (PLD) species. Alternatively, we developed quantitative real-time PCR assay based on EvaGreen and determined field accessibility throughout the investigation of distribution in the entire Korean coastal waters and population dynamics in Shihwa Lake. The P. piscicida-specific primers based on internal transcribed spacer 1 (ITS 1) were designed and the specificity of primers was confirmed by PCR with other genomic DNAs which have genetic similarity with target species. Through real-time PCR assay, a standard curve which had a significant linear correlation between log cell number and $C_T$ value ($r^2{\geq}0.999$) and one informative melting peak ($88^{\circ}C$) were obtained. These results implies that developed real-time PCR can accurately detect and quantify P. piscicida. Throughout the field applications of real-time PCR assay, P. piscicida was distributed in western (Mokpo and Kimje) and easthern (Gangneng) Korean coastal water even though light microscopy failed to identify P. piscicida. In the investigation of population dynamics in Shihwa Lake, the density of P. piscicida was peaked in June, July and August 2007 at St. 1 where salinity (${\leq}15psu$) was lower than the other 2 sites. In this study, we successed to develop EvaGreen bassed real-time PCR for detection and quantification of P. piscicida in fields, so this developed assay will be useful for various ecological studies in the future.

Effects of Different Altitudes and Cultivation Methods on Growth and Flowering Characteristics of Elsholtzia splendens (재배지대와 유형이 꽃향유의 생육 및 개화 특성에 미치는 영향)

  • Young Min Choi;Jin Jae Lee;Dong Chun Cheong;Hong Ki Kim;Hee Kyung Song;Seung Yoon Lee;So Ra Choi;Hyun Ah Han;Han Na Chu
    • Korean Journal of Plant Resources
    • /
    • v.37 no.4
    • /
    • pp.392-400
    • /
    • 2024
  • This study was conducted to find the flowering and growth characteristics according to the different altitudes (plains and mid-mountain regions) and cultivation methods (field and plastic houses cultivation) of Elsholtzia splendens. Experimental regions located at 12 meters and 500 meters above sea level were selected for the plains and the mid-mountain, respectively, and the same method was applied for cultivation management by different altitudes and cultivation methods. In the mid-mountain region, flower bud emergence (2-3 days), flowering (9 days), and full bloom (6-7 days) stages of Elsholtzia splendens were earlier than in the plains, and field cultivation was earlier than plastic house cultivation. The plant height, the main stem diameter, and the number of branches tended to increase gradually after an initial rapid growth at 59 to 69 days after planting date. The days of duration of sunshine (less than 8 hours) from the rainy season (June 20) to the period when vegetative growth increases gradually (59 to 69 days after planting) was 22 to 29 days and 26 to 35 days in the plains and the mid-mountain regions respectively, and this period was estimated time of transition from vegetative growth to reproductive growth. The spikes growth of Elsholtzia splendens by cultivation altitudes was higher in the mid-mountain region than in the plains, and there were no statistically significant differences in growth characteristics except for the main stem diameter, the number of branches, and the dry matter. Also, the amount of flowering and growth was higher in the plastic house cultivation compared to the field cultivation. As a result, some differences in flowering amount were observed when cultivating Elsholtzia splendens for landscaping purposes, but it was considered possible to cultivate in both plains and mid-mountain regions. This study therefore provides ecological information for understanding the relationship between weather characteristics and growth of Elsholtzia splendens.