• Title/Summary/Keyword: Sea Field

Search Result 1,295, Processing Time 0.034 seconds

Magnetic Anisotropy and Tectonic Stress Field of Tertiary Rocks in Pohang-Ulsan area, Korea (포항이남 제3기분지암석의 자기 비등방성과 지구조적 응력장)

  • Kim, In-Soo
    • Economic and Environmental Geology
    • /
    • v.23 no.1
    • /
    • pp.59-71
    • /
    • 1990
  • Magnetic anisotropy of a total of 213 independently oriented Tertiary rock samples from Pohang-Ulsan area has been studied. The sampled strata comprise basalts, tuffs and black shale, and range in age from Eocene to Miocene. The previous palaeomagnetic studies indicate that their magnetic carrier minerals are titanomagnetites. Among 23 sampled sites, 11 sites were found to preserve magnetic load foliation parallel to the bedding plane caused by the Iithostatic load of the overlying strata. Other 4 sites showed magnetic lineation indicating the flow direction of lava and tuffs. The remaining 8 sites revealed the magnetic tectonic foliation nearly vertical to the bedding plane. This magnetic foliation is interpreted to be generated by tectonic compression which acted nearly horizontally during the solidification stage of the strata. The compression directions deduced from the tectonic foliation of the 8 sites can be grouped into internally very consistent two group: a N-S trending one and the other WNW-ESE trending one. It is interpreted that the former N-S compression was associated with the N-S spreading of the East Sea(Sea of Japan) and the dextral strike-slip movement of the Yangsan-Ulsan fault system. The latter WNW-ESE compression is interpreted to represent the folding and reverse faulting activity in the Korean and Tsushima straits during middle/late Miocene times.

  • PDF

Key Layouts of the 5,000 ton' New Scientific Research Vessel of KIOST (5,000톤급 대형 해양과학연구선 설계 특성)

  • Park, Cheong Kee
    • Ocean and Polar Research
    • /
    • v.37 no.3
    • /
    • pp.235-247
    • /
    • 2015
  • The main purpose of procuring the oceanographic research vessel with state-of-the-art technology is to provide a floating laboratory to conduct field work on the global oceans. The vessel should be properly utilized to locate and evaluate unexplored natural resources as well as to contribute international efforts to better understand and manage global environmental issues. Top priorities in the vessel design are high safety standards, noise and vibration control efficiency, and effective application of research equipment. For the accomplishment of all activities, the vessel length over all should be extended ~100 m with a gross tonnage of ~5,900 ton. In particular, the dynamic positioning system II will essentially operate at sea state 6. The high efficiency emissions reduction system will also be adopted in preparation for entry into force of 3rd exhaust emission control (Tier III). About 130 navigational and scientific instruments will be installed. The final design and model test of the new research vessel were reviewed and completed, respectively, in 2014. Currently, the ship is being built on schedule and expected to be delivered in December 2015. Within the near future, the new vessel will assume the role of carrying out multidisciplinary oceanographic researches of the highest standards in a technologically advanced and environment friendly manner.

Source Identification and Estimation of Source Apportionment of Ambient PM2.5 at Western National Park Site in USA (미국 서부 국립공원 지역의 미국 서부 국립공원 지역의 PM2.5에 대한 오염원 확인 및 기여도 추정)

  • Hwang, In-Jo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.26 no.1
    • /
    • pp.21-33
    • /
    • 2010
  • The objective of this study was to estimate the $PM_{2.5}$ source apportionment at the Pinnacles National Monument IMPROVE site in western coastal USA. The PMF was applied to identify the existing sources and apportion the $PM_{2.5}$ mass to each source. To analyze local source impacts from various wind directions, the NPR analysis was performed using source contribution results with the wind direction values measured at the site. Also, PSCF was applied to identify the locations by point sources relative to the back trajectories. A total of 1,634 samples were collected from March 1988 to May 2004 by IMPROVE sampler and 32 chemical species were analyzed by PIXE, PESA, XRF, IC, and TOR methods. The PMF modeling identified seven sources and the average mass was apportioned to gasoline vehicle, secondary sulfate, aged sea salt, secondary nitrate, wood/field burning, diesel emission, and soil, respectively. In this study, the average mass was apportioned to gasoline vehicle (33.0%), secondary sulfate (25.7%), aged sea salt (17.8%), and secondary nitrate (10.1%). Also, this study suggests the possible role for source apportionment study of $PM_{2.5}$ at similar areas such as wildness, national park, and coastal areas in Korea.

A STUDY ON THE DIFFUSE ATTENUATION COEFFICIENT OF DOWN-WELLING IRRADIANCE AROUND THE YELLOW SEA

  • Min, Jee-Eun;Ahn, Yu-Hwan;Ryu, Joo-Hyung;Lee, Kyu-Sung
    • Proceedings of the KSRS Conference
    • /
    • v.1
    • /
    • pp.459-462
    • /
    • 2006
  • The diffuse attenuation coefficient for down-welling irradiance ($K_d$) is an important parameter for ocean studies including remote sensing applications. For the vast ocean, ocean color remote sensing is the only possible means to get the fine-scale measurements of $K_d$. To develop a technique of estimating $K_d$ from remotely sensed data, the following underwater optical parameters (absorption coefficient (a), attenuation coefficient (c), scattering coefficient (b), diffuse attenuation coefficient ($K_d$), etc.) have been studied. For this research we conducted the field campaign around the Yellow Sea at $8{\sim}9$ June, 2006. We obtained a set of underwater optical parameter data: down-welling irradiance ($E_d$), up-welling irradiance ($E_u$) and up-welling radiance ($L_u$) using TriOS optical sensors and a, c coefficient using Spectral Absorption and Attenuation Meter (AC-S). We then derived $K_d$ values from $E_d$ for each depth.

  • PDF

The secondary excited induction generator in random wave input system

  • Kim, Moon-Hwan
    • Journal of information and communication convergence engineering
    • /
    • v.7 no.2
    • /
    • pp.209-214
    • /
    • 2009
  • The employment of the induction generator is preferable in the natural energy utilization by the minimum maintenance and the mechanical robustness, Another merit is also expected when it is connected to the power network system, because constant-voltage and constant frequency (CVCF) power generation is easily realized in spite of the variation of the rotor speed. However the induction generator needs much amount of the reactive power that reduces power factor in the primary side. The improvement of power factor in the primary side requires large VAR compensator, this point is solved, the merit of the induction machine as a main generator will become more established. This paper proposes a novel approach where the secondary is controlled by a PWM inverter not only to get CVCF power but also to improve the primary power factor. Basically the inverter is controlled so that the field current is supplied from the secondary side in this approach. The required capacity of the inverter is small, because only the slip power is controlled in the secondary side. In the experimental system where the sea wave torque simulator is used, the power factor is well improved by the microcomputer controlled PWM inverter.

A Study on the Development of the Producing Zone Type Marine Dryer (On Weight Reduction Rate and Temperature Variations) (산지형 수산 건조시스템 개발에 관한 연구 (무게 감소율과 온도변동을 중심으로))

  • Kim, Kyong-Suk;Mun, Soo-Beom;Lee, Choon-Wha;Choe, Soon-Yeol;Park, Moon-Kab;Kim, Kyung-Kum
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.4
    • /
    • pp.477-484
    • /
    • 2010
  • The majority of currently domestic dried sea foods is holding sanitary safety on storage and distribution, a structural problem to be in quality serious to sun drying. This paper the productive times and the on-site operation that production is fixed are easy, and it have reported the experimental results that carried out on development of a drying system toward field which can keep the highest quality and economy.

The Export-import Trends of Agricultural Products in Malaysia (말레이시아 농산물 수출입 동향)

  • Kim, Choong-Soo;Lee, Sok-Young
    • Korean Journal of Agricultural Science
    • /
    • v.33 no.2
    • /
    • pp.97-106
    • /
    • 2006
  • To strengthen the competitiveness of agricultural sector of the Korea, the direction of market trends on agriculture of the Malaysia was reviewed. The most dominating agricultural area in value is palm oil products, and forest products, sea products poultry products and rubber products is in order. The cultivated area of highest two top plants, oil palm and rubber, was about 4.4 million hectares in 2005, but it is decreasing year by year. Comparatively, rice field, pine apple and fruits tree cultivating area is increasing in tendency by the year. Among all the agricultural products, those items such as pork meat, poultry, egg were self-sufficient, rice, fruits, vegetables and sea products were about 70 to 80% self-sufficient, and beef meat, goat meat and milk were below 20% self-sufficient. Most of the grains, such as wheat, rice, barley, corn etc. and their processed food were imported. Also, temperate fruits such as apple, pear, and water cultivated as well as sprouting vegetables are imported. Ornamental products as cutting flowers and orchids are exported to mainly to the Singapore, but high quality temperate fruits and vegetables are imported from Australia. Oil palm exportation covers the balance of the other items imported and obtaining the foreign money as well in Malaysia.

  • PDF

Estimation of the thickness of floating silty clay sediment using dual frequency single beam echo sound system (이중 주파수 에코 사운드 시스템을 이용한 부니층 두께 조사)

  • Ha, Hee-Sang
    • Journal of the Korean Geophysical Society
    • /
    • v.5 no.3
    • /
    • pp.219-231
    • /
    • 2002
  • Single beam echo sounding was used to delineate bathymetry sea bottom in the area of hydrography and marine navigation. This research was aimed at measuring the thickness of floating silty clay sediment with dual frequencies echo sounding system. There occur discrepancies in penetrating depth through sea beds between high frequency(200 KHz) and low(33 KHz) frequency. RI density logging was employed to characterize the floating silty clay sediment of Guangyang bay, which was chosen to investigate the proposed site for reclamation field. The volume of floating silty clay sediment was used to design by estimating size of reclamation site. The estimation strategies developed in this study will be readily applicable to measure the Pattern of sedimentation via regular hydrographic survey in the future.

  • PDF

EVALUATION OF "INCREASING TREND" IN SEAWIFS-OBSERVED ANGSTROM EXPONENT DURING 1998-2006 OVER EAST-ASIAN WATERS

  • Fukushima, Hajime;Ogata, Kazunori;Li, Liping
    • Proceedings of the KSRS Conference
    • /
    • 2008.10a
    • /
    • pp.336-339
    • /
    • 2008
  • Monthly mean data of Angstrom exponent and Aerosol optical thickness (AOT) from Sea-viewing Wide Field-of-view Sensor (SeaWiFS) measurements over the East Asian waters were analyzed. Increasing trend of the satellite-derived Angstrom exponent was found over 1998-2006 while AOT mean was observed stable during the same period. Statistical test showed that annual increase in Angstrom exponent of about 0.01 is statistically significant over three study sub-areas out of six surrounding waters of Japan. Comparison with Aqua/MODIS-derived Angstrom exponent time series over June 2002 through June 2008 showed consistent correlation, with similar statistical significance. The trend of Angstrom exponent was interpreted as increase in fraction of small aerosol particles to give quantitative estimates on the variability of aerosols. The mean increase is evaluated to be about +0.35%/yr or more in terms of the contribution of small particles to the total AOT, or sub-micron fraction (SMF).

  • PDF

Variations of 'Rightward Bias' with Typhoon Using an Ideal 3D Primitive Equation Numerical Model (3차원 수치모델상에서 태풍통과시 '우측쏠림현상')

  • Hong, Chul-Hoon;Masuda, Akira;Hirose, Naoki
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.53 no.4
    • /
    • pp.637-649
    • /
    • 2020
  • An ideal 3D primitive equation model is implemented to investigate upper ocean response to typhoons, focusing on rightward bias (RWB) which means an appearance of an intensified sea surface cooling to the right side of the typhoon track. The model has 26-stratified levels and a flat bottom (1000 m), covering a rectangular domain of about 3,060 km×3,300 km with four open boundaries. The sea water is forced by an atmospheric pressure and a gradient wind of the typhoon. The model well reproduces the RWB in previous observations and theoretical analyses. For the fast moving typhoon (FMT) (-8m/sec), the model shows that in the mixed layer (ML), the RWB in the SST noticeably appears clearly illustrating the coupling between inertial motion and wind stress, but in the subsurface layer (-100m), the RWB does not emerge since a cyclonic current field (CCF) caused by wind stress curl is primarily dominant. For the slowly moving typhoon (SMT) (-3m/sec), however, the RWB does not emerge because the coupling is weakened and the CCF is rather predominant even in the ML. In the model, we conclude that the RWB noticeably emerges in the FMT but does not emerge in the SMT related to predominance of CCF.