• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Korean Journal of Food Science and Technology
• /
• v.54 no.4
• /
• pp.437-444
• /
• 2022

This study investigated the optimal quality characteristics of sauerkraut made by adding 0.5, 1.0, 1.5, 2.0, and 2.5% (w/w) sea salt to cabbage according to the storage period. The results showed that the pH and salinity of 0.5-2.5% sauerkraut decreased, while its total acidity increased during storage. After 20 d of storage, 1.5% or less sauerkraut showed low yellowness, but high brightness and hardness. Moreover, the lactic acid bacteria in 0.5-2.5% sauerkraut maintained at least 7.06 log CFU/mL until 28 d of storage, suggesting that the lower the salt concentration, the higher were the amount of lactic acid bacteria. The coliform group was not detected after 4 d of storage. In conclusion, the quality characteristics of sauerkraut with a salt concentration of 1.5% or less were excellent until 20 d of storage at 4℃. This study provides valuable data for the safe and high-quality assessment of low-salt sauerkraut in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.955-964
• /
• 2022

According to the statistics of maritime accidents statistics that have occurred in Korea over the past five years, maritime accidents caused by fishing boats have increased every year from 1,646 in 2016 to 2,100 in 2020. In particular, of the 378 capsizing accidents that have occurred in the past five years, 252 capsizing accidents of fishing boats account for a high proportion of 66.7%, therefore, it is urgent to come up with countermeasures. In this study, to determine the cause of the capsizing accident of fishing boat No. 66 poongsung, data such as stability and seawater inflow routes were collected, and the effects of waterproof, additional wood decks, and windbreakers on stability on were quantitatively analyzed. Additional decks, windbreakers, and waterproof installed in No. 66 poongsung cause initial list, deteriorate stability, and fail to meet fishing boat structural standards. In addition, it was analyzed that the stability was weakened due to the characteristics of the hull shape of No. 66 poongsung. To estimate the stability at the time of the accident, the stability at the time of the working in the fishing ground condition, amount of seawater inflow according to the change in sea conditions, hull oscillation situation, and change in stability due to the hull factor were calculated. As a result, the minimum GoM was satisfied at the time of working in the fishing ground, but it could not be restored at the maximum wave height of 4 m, and the minimum GoM was not satisfied at the maximum wave height of 4 m owing to the influence of seawater inflow and oscillation due to the hull list. However, the minimum GoM was satisfied if additional decks and windbreakers installation was excluded among the factors affecting the stability of No. 66 poongsung.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.965-972
• /
• 2022

This is a basic study to establish marine activity criteria based on the seakeeping performance of less than 10-tons fishing vessels. These vessels account for approximately 95% of Korea's currently registered fishing vessels, and accidents and loss of life are also occurring during marine activities such as navigation, and fishing. Accordingly, the Ministry of Oceans and Fisheries has set a regulation of vessel traf ic control to restrict the operation of fishing vessels when the high seas watch takes effect, but it is applied equally without criteria according to the ship ton level and wave height; therefore, many differences may exist in ship fluctuations. Because the fluctuation of the ship owing to the wave height can be a factor in marine accidents by reducing the sense of boarding and performance of equipment, the seakeeping performance must be reviewed during waves to secure safe marine activities such as navigation and fishing. However, the review for the fishing vessel of established marine activity criteria based on the seakeeping performance is insufficient. Accordingly, the seakeeping performance was evaluated for a 10-ton class (G/T 9.77 tons) fishing vessel in Korea, and the level of marine activity according to the significant wave height and ship speed was interpreted by applying the operation and survival of the established seakeeping performance criteria. The analysis results indicated that the roll of the ship exceeded the operation criteria from 0.4m and the survival criteria from 2.2m. The pitch of the ship exceeded the operation criteria from 1.7m and did not exceed the survival criteria until 3.0m. However, the rolling exceeding the survival criteria from 2.2m may not be safe. Therefore, fishing vessels with less than 10-tons can leave before the high seas watch takes effect. However, they did not satisfy the criteria for evaluating the performance of the sea in relation to marine activities. Although this study was limitedly evaluated for 10-ton fishing vessels, it is expected to be of great help in preparing marine activity criteria.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.127-143
• /
• 2022

Recently, many attempts to run numerical ocean models in cloud computing environments have been tried actively. A cloud computing environment can be an effective means to implement numerical ocean models requiring a large-scale resource or quickly preparing modeling environment for global or large-scale grids. Many commercial and private cloud computing systems provide technologies such as virtualization, high-performance CPUs and instances, ether-net based high-performance-networking, and remote direct memory access for High Performance Computing (HPC). These new features facilitate ocean modeling experimentation on commercial cloud computing systems. Many scientists and engineers expect cloud computing to become mainstream in the near future. Analysis of the performance and features of commercial cloud services for numerical modeling is essential in order to select appropriate systems as this can help to minimize execution time and the amount of resources utilized. The effect of cache memory is large in the processing structure of the ocean numerical model, which processes input/output of data in a multidimensional array structure, and the speed of the network is important due to the communication characteristics through which a large amount of data moves. In this study, the performance of the Regional Ocean Modeling System (ROMS), the High Performance Linpack (HPL) benchmarking software package, and STREAM, the memory benchmark were evaluated and compared on commercial cloud systems to provide information for the transition of other ocean models into cloud computing. Through analysis of actual performance data and configuration settings obtained from virtualization-based commercial clouds, we evaluated the efficiency of the computer resources for the various model grid sizes in the virtualization-based cloud systems. We found that cache hierarchy and capacity are crucial in the performance of ROMS using huge memory. The memory latency time is also important in the performance. Increasing the number of cores to reduce the running time for numerical modeling is more effective with large grid sizes than with small grid sizes. Our analysis results will be helpful as a reference for constructing the best computing system in the cloud to minimize time and cost for numerical ocean modeling.

• Korean Journal of Poultry Science
• /
• v.49 no.3
• /
• pp.145-156
• /
• 2022

The effect of paternal telomere length on reproductive performance, relationship between paternal and offspring telomere length, and association between paternal telomere length and offspring production performance were investigated in Korean native chickens. Using 22 paternal chickens and 329 offspring, the paternal reproductive performance such as fertility, embryo mortality, and hatchability, as well as the offspring production performance such as survival rate, body weight, and weight gain were analyzed. Telomere length was analyzed through quantitative fluorescence in situ hybridization using lymphocytes. No significant differences were observed in fertility, embryo mortality, and hatchability between paternal chicken telomere lengths (P<0.05). These results indicate that paternal telomere length had a weak negative correlation with fertility and embryonic death rate but a weak positive correlation with hatchability. The correlation coefficient between paternal telomere length and offspring survival rate was r=0.17 (P>0.05). The group of offspring with long paternal telomeres showed relatively poor growth performance. Moreover, a significant negative correlation was estimated between paternal telomere length and offspring growth performance (P<0.05). The correlation coefficient between paternal and offspring telomere lengths was r=0.075 (P>0.05). In conclusion, there was a weak association between paternal telomere length and reproductive performance, offspring survival rate, and offspring telomere length, respectively. However, paternal telomere length and offspring growth performance showed a negative relationship. Such results could be due to the re-extension of telomere length by telomere reprogramming in the early embryonic stage and the different degree of telomere shortening between individuals with increasing age after birth.

• Korean Journal of Culture and Social Issue
• /
• v.29 no.1
• /
• pp.75-99
• /
• 2023

The current study aimed to explore the suicidal behaviors and risk factors of completed suicides using psychological autopsy and use them as index variables to classify suicidal types. In addition, this study looked into the influential factors that affect each suicidal type. related to suicidal behaviors and suicidal risk factors by psychological autopsy. In addiction, the distinctions among the classes were analyzed. For this, psychological autopsies were conducted on the families and the close ones of 128 completed suicides. Then, the index variables were finally chosen for classifying suicidal types. The selected index variables for suicidal risk factors were mental disorders, suicide/self-harm, significant changes in physical appearance, marital conflict, adjustment and relationship issues at work/school, unemployment/layoff, jobless status and serious financial problems. The selected index variables for suicidal behaviors were expressing their suicidal attempts, writing suicidal notes, asking for help, the time/place/method of suicidal behavior, past suicidal/self-harm experience and the first person who witnessed the suicide. The Latent Class Analysis(LCA) and the 3-step method were used for classifying suicidal types. Then external variables(financial changes, cohabitation, existence of stressors, changes in stress level or relationships and family members with mental disorder/alchohol problems/ physical disorders, and work/school stisfaction) were applied for distinguishing classes. As a result, 5 classes(financial problems, adjustment problems, complex problems, psychiatric problems, and response to event[s]) were revealed on suicidal behaviors and 3 classes(residence- suicidal attempt- found by family, nonresidence- nonsuicidal attempt- found by acquaintances, residence- nonsuicidal attempt- found by family) were presented on suicidal risk factors. External variables such as gender, marital status, cohabitation, changes in relationships significantly differentiated among the 3 classes. Especially, class 3(residence- nonsuicidal attempt- found by family) tended to cohabit with others, were married, and had a significantly high level of interpersonal conflicts. When comparing the 5 classes of suicidal risk factors, auxiliary variables such as economic changes, cohabitation, stress, relationship changes, and family-related problems, and school/work satisfaction significantly differentiated the 5 classes. Especially class 3 (complex problems) experienced comparatively less family-related problems, but showed an aggravating level of personal stress. Suicial prevention strategies should be provided considering the characteristics of each class and the influential factors.

• Korean Journal of Ecology and Environment
• /
• v.55 no.2
• /
• pp.99-110
• /
• 2022

We investigated physicochemical properties and isotopic compositions of organic matter (δ¹³C_TOC and δ ¹⁵N_TN) in the old fish farming (OFF) site after the cessation of aquaculture farming. Based on this approach, our objective is to determine the organic matter origin and their relative contributions preserved at sediments of fish farming. Temporal and spatial distribution of particulate and sinking organic matter(OFF sites: 2.0 to 3.3 mg L^-1 for particulate matter concentration, 18.8 to 246.6 g m^-2 day^-1 for sinking organic matter rate, control sites: 2.0 to 3.5 mg L^-1 for particulate matter concentration, 25.5 to 129.4 g m^-2 day^-1 for sinking organic matter rate) between both sites showed significant difference along seasonal precipitations. In contrast to variations of δ¹³C_TOC and δ¹⁵N_TN values at water columns, these isotopic compositions (OFF sites: -21.5‰ to -20.4‰ for δ¹³ C_TOC, 6.0‰ to 7.6‰ for δ¹⁵N_TN, control sites: -21.6‰ to -21.0‰ for δ¹³C_TOC, 6.6‰ to 8.0‰ for δ¹⁵N_TN) investigated at sediments have distinctive isotopic patterns(p<0.05) for seawater-derived nitrogen sources, indicating the increased input of aquaculture-derived sources (e.g., fish fecal). With respect to past fish farming activities, representative sources(e.g., fish fecal and algae) between both sites showed significant difference (p<0.05), confirming predominant contribution (55.9±4.6%) of fish fecal within OFF sites. Thus, our results may determine specific controlling factor for sustainable use of fish farming sites by estimating the discriminative contributions of organic matter between both sites.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.30-36
• /
• 2022

A sensor is needed to continuously and automatically measure the change in HNS concentration in industrial facilities that directly discharge to the sea after water treatment. The basic function of the sensor is to be able to detect ppb levels even at room temperature. Therefore, a method for increasing the sensitivity of the existing sensor is proposed. First, a method for increasing the conductivity of a film using a conductive carbon-based additive in a nanoparticle thin film and a method for increasing ion adsorption on the surface using a catalyst metal were studied.. To improve conductivity, carbon black was selected as an additive in the film using ITO nanoparticles, and the performance change of the sensor according to the content of the additive was observed. As a result, the change in resistance and response time due to the increase in conductivity at a CB content of 5 wt% could be observed, and notably, the lower limit of detection was lowered to about 250 ppb in an experiment with organic solvents. In addition, to increase the degree of ion adsorption in the liquid, an experiment was conducted using a sample in which a surface catalyst layer was formed by sputtering Au. Notably, the response of the sensor increased by more than 20% and the average lower limit of detection was lowered to 61 ppm. This result confirmed that the chemical resistance sensor using metal oxide nanoparticles could detect HNS of several tens of ppb even at room temperature.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.435-445
• /
• 2023

A delta is a depositional landform that is formed when sediment transported by a river is deposited in a relatively low-energy environment, such as a lake, sea, or a main channel. Among these, a delta formed at the confluence of rivers has a great importance in river management and research because it has a significant impact on the hydraulic and sedimentological characteristics of the river. Recently, the equilibrium state of the confluence area has been disrupted by large-scale dredging and construction of levees in the Nakdong River. However, due to the natural recovery of the river, the confluence area is returning to its pre-dredging natural state through ongoing sedimentation. The time-series data show that the confluence delta has been steadily growing since the dredging, but once it reaches a certain size, it repeats growth and retreat, and the overall size does not change significantly. In this study, we developed a model to explain the sedimentation-erosion processes in the confluence area based on the assumption that the confluence delta reaches a dynamic equilibrium. The model is based on two fundamental principles: sedimentation due to supply from the tributary and erosion due to the main channel. The erosion coefficient that represents the Nakdong River confluence areas, was obtained using data from the tributaries of the Nakdong River. Sensitivity analyses were conducted using the developed model to understand how the confluence delta responds to changes in the sediment and water discharges of the tributary and the main channel, respectively. We then used annual average discharge of the Nakdong River's tributaries to predict the dynamic equilibrium positions of the confluence deltas. Finally, we conducted a simulation experiment on the development of the Gamcheon-Nakdong River delta using recorded daily discharge. The results showed that even though it is a simple model, it accurately predicted the dynamic equilibrium positions of the confluence deltas in the Nakdong River, including the areas where the delta had not formed, and those where the delta had already formed and predicted the trend of the response of the Gamcheon-Nakdong River delta. However, the actual retreat in the Gamcheon-Nakdong River delta was not captured fully due to errors and limitations in the simplification process. The insights through this study provide basic information on the sediment supply of the Nakdong River through the confluence areas, which can be implemented as a basic model for river maintenance and management.