• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.128-128
• /
• 2010

중적외선 영역은 장애물에 의해서 파장의 흡수가 거의 일어나지 않기 때문에 적외선 소자에서 널리 이용되고 있다. 현재 대부분의 중적외선 소자에는 HgCdTe (MCT)가 사용되고 있지만, 3성분계 화합물이 가지는 여러 문제를 가지고 있다. 반면에, 2성분계 화합물인 인듐안티모나이드 (InSb)는 중적외선 영역 ($3-5\;{\mu}m$) 파장 대에서 HgCdTe와 대등한 소자 특성을 나타냄과 동시에 낮은 기판 가격, 소자 제작의 용이성, 그리고 야전과 우주 공간에서 소자 동작의 안정성 때문에 HgCdTe를 대체할 물질로 주목을 받고 있다. InSb는 미국과 이스라엘과 같은 일부 선진국을 중심으로 연구가 되었지만, 국방 분야의 중요한 소자로 인식되었기 때문에 소자 제작에 관한 기술적인 내용은 국내에 많이 알려지지 않은 상태이다. 따라서 본 연구에서는 InSb 소자 제작의 기초연구로 절연막과 pn 접합 형성에 대한 연구를 수행하였다. 절연막의 특성을 알아보기 위해, InSb 기판위에 $SiO_2$와 $Si_3N_4$를 PECVD (Plasma Enhanced Chemical Vapor Deposition)로 증착을 하였다. 절연막의 계면 트랩 밀도는 77K에서 C-V (Capacitance-Voltage) 분석을 통하여 계산하였으며, Terman method 방법을 이용하였다.[1] $SiO_2$는 $120-200^{\circ}C$의 온도 영역에서 계면 트랩 밀도가 $4-5\;{\times}\;10^{11}cm^{-2}$범위를 가진 반면, $240^{\circ}C$의 경우 계면 트랩 밀도가 $21\;{\times}\;10^{11}cm^{-2}$로 크게 증가하였다. $Si_3N_4$는 $SiO_2$ 절연막에 비해서 3배 정도의 높은 계면 트랩 밀도 값을 나타내었으며. Remote PECVD 장비를 이용하여 $Si_3N_4$ 절연막에 관한 연구를 추가적으로 진행하여 $7-9\;{\times}\;10^{11}cm^{-2}$ 정도의 계면 트랩 밀도 값을 구할 수가 있었다. 따라서 InSb에 대한 절연막은 $200^{\circ}C$ 이하에서 증착된 $SiO_2$와 Remote PECVD로 증착 된 $Si_3N_4$가 적합하다고 할 수 있다. 절연막 연구와 더불어 InSb 소자의 pn 접합 연구를 진행하였다. n-InSb (100) 기판 ($n\;=\;0.2-0.85\;{\times}\;10^{15}cm^{-3}$ @77K)에 $Be^+$이온 주입하여 p층을 형성하여 제작 되었으며, 열처리 조건에 따른 소자의 특성을 관찰 하였다. $450^{\circ}C$에서 30초 동안 RTA (Rapid Thermal Annealing)공정을 진행한 샘플은 -0.1 V에서 $50\;{\mu}A$의 높은 암전류가 관찰되었으며, 열처리 조건을 60, 120, 180초로 변화하면서 소자의 특성 변화를 관찰하였다.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.833-840
• /
• 1996

Diamond thin films were deposited on p-type (100) Si wafers using MPECVD. Prior to deposition, ultrasonic striking was done to improve density of nucleation sites with dimond powder of 40~$60\mu$m size. Then diamond thin films were deposited at $^900{\circ}C$, 40Torr and 1000W microwave power using ${CH}_{4}$ and ${H}_{2}$ gases. The purity, the morphology and the microstructur'e and microdefects of diamond thin films were characterized by Raman spectroscopy, SEM and TEM, repectively. In Raman spectroscopy the peaks of non-diamond phase increased as ${CH}_{4}$, concentration increased. In SEM, the morphology of diamond thin films varied from crystalline to cauliflower as ${CH}_{4}$, concentration increased. As ${CH}_{4}$ con centration increased, the density of defects increased, with most defects being {III} twin. ${MTP}_{5}$, were formed with five (II]) planes. As these (Ill) Planes were twinned, ${MTP}_{5}$, represented five-fold symmetry. ]n the interfaces, defects in diamond thin films fanned out from small regions implying nucleation sites.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.64-64
• /
• 2019

In order to evaluate the taxonomical relevance of seeds morphological characteristics, a macroand micro-morphological study was conducted on seeds of Korean Vicia (Fabacea). We collected 19 taxa of genus Vicia distributed in Korea and introduced one taxa from USDA. The morphological characteristic and testa texture of seeds were investigated using a Stereo-microscope (SM) and Scanning Electron Microscope (SEM). Most of Vicia seeds were found spherical or oblong and some seeds were oval and subglose. The largest seed was V. chosenensis ($4.3{\times}3.6{\times}2.6mm$), and the smallest was V. teterasperma ($1.7{\times}1.7{\times}1.5mm$). V. chosenensis and V. hirsuta were separated from other Vicia species by having a shiny in seed finish. In hilum shape, 14 species have linear and V. sepium was distinguished by having a circumlinear. In testa texture, they developed papilae, only V. hirsuta has lophate in level type. Deposition of the sheet-like debris between the papilae was observed in V. chosenensis, V. cracca, and V. unijuga. Polymorphism information content (PIC) values of the 13 qualitative morphological characters (QMC) were in the range of 0.0950 to 8863 with an average of 0.4611. PIC value of seed shape, seed colour, hilum colour were 0.7403, 0.8177, 0.883 respectively. Cluster analysis based on QMC detected three main clades. V. cracca, V. amurensis, V. amoena were involved in Group 1 and V. unijuga f. minor, V. unijuga, V. unijuga f. angustifolia, V. sepium, V. hirticalycina, V. hirsuta, V. linearfolia, V. chosenensis, V. pseudorobus, V. venosa var. cuspidata were involved in Group 2. V. nipponica, V. japonica, V. villosa, V. dasicarpa, V. bungei, V. angustifolia, V. tetrasperma were clustered in Group 3. Our research suggests that morphological characteristic and testa texture of seeds could be used as definers for the identification of genus Vicia.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.282-295
• /
• 2023

Background: Secretory leukocyte protease inhibitor (SLPI) protects tissues from proteases and promotes cell proliferation and healing. SLPI also reduces periodontal inflammation and alveolar bone resorption by inhibiting proinflammatory cytokine expression in rat periodontal tissues and osteoblasts. However, little is known of the role of SLPI in the expression of osteoclast regulatory factors from osteoblasts, which are crucial for the interaction between osteoblasts and osteoclasts. Therefore, we aimed to determine the effects of SLPI on the regulation of osteoclasts and osteoblasts in LPS-treated alveolar bone and osteoblasts. Methods: Periodontitis was induced in rats using LPS. After each LPS injection, SLPI was injected into the same area. Immunohistochemical analysis was performed with antibodies against SLPI, RANKL, OPG, and Runx2 in the periodontal tissue. RT-PCR and western blotting were performed to determine the expression levels of SLPI, RANKL, OPG, and Runx2 in LPS- and SLPI/LPS-treated MC3T3-E1 cells. SLPI/LPS-treated MC3T3-E1 cells were also stained with Alizarin Red S. Results: Immunohistochemical analysis showed that the expression levels of SLPI, OPG, and Runx2 were higher while that of RANKL was lower in the LPS/SLPI group relative to those in the LPS group. The mRNA and protein expression of SLPI, OPG, and Runx2 was higher in SLPI/LPS/MC3T3-E1 cells than in LPS/MC3T3-E1 cells, and RANKL expression was lower. During differentiation, OPG and Runx2 protein levels were higher whereas RANKL levels were lower in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 cells on days 0, 4, 7, and 10. In addition, mineralization and matrix deposition were higher in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 on days 7 and 10. SLPI decreased RANKL expression in LPS-treated alveolar bone and osteoblasts but increased the expression of OPG and Runx2. Conclusion: SLPI can be considered as a regulatory molecule that indirectly regulates osteoclast activation via osteoblasts and promotes osteoblast differentiation.

• Applied Microscopy
• /
• v.32 no.4
• /
• pp.385-398
• /
• 2002

The purpose of the present study is to investigate whether stromal cells supporting specific microenvironment for hematopoiesis of bone marrow are affected by toxicants and therapeutic drugs such as antibiotics and anticancer drugs and whether laminin-1 is associated with such effects. SD rats were intraperitoneally injected with 75 mg/kg of cyclophosphamide which is widely used to treat infant's solid tumor, leukemia and myeloma and sacrificed after 3 days, 1 week, 3 weeks or 5 weeks of injection. The bone marrow extracted and paraffin-sectioned was analyzed using immunohistochemical staining. A part of tissues was subjected to electron microscopy following reaction with rabbit anti-laminin antibody, biotinylated goat anti-rabbit IgG conjugated with 12 nm gold particles, and staining with uranyl acetate. 1. The bone marrow tissue at day 3 post injection with cyclophosphamide displayed dilated venous sinus, partial necrotic death, and decreased number of hematopoietic cells. Laminin-1 was intensively stained in the reticular and adipose tissues. 2. Up to 5 weeks post injection, laminin-1 was stained at a low level in the stromal tissue of bone marrow and the number of hematopoietic cell was increased. 3. Deposition of the gold particle which represents laminin-1 expression was observed at the highest level in the stromal cells of bone marrow obtained 3 days after injection, and decreased after 1 to 5 weeks. These results suggest that stromal cells which play a role in supporting microenvironment for bone marrow hematopoiesis augment induction of laminin-1 expression and activation upon administration of cyclophosphamide.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.303-314
• /
• 1989

The electrum-silver-sulfide mineralization of the Geojae island area was deposited in three stages (I, II, and carbonate) of quartz and calcite veins that crosscut Late Cretaceous volcanic rocks and granodiorite(83 m.y.). Stages I and II were terminated by the onset of fractunng and breCCIation events. Fluid inclusion data suggest that the gold-sulfide-bearing stages I and II each evolved from an initial high temperature( near $370^{\circ}C$) to a later low temperature(near $200^{\circ}C$). Each of those stages represented a separate mineralizing system which cooled prior to the onset of the next stage. The relationship between homogenization temperature and salinity in stages I and II suggests a complex history of boiling, cooling and dilution. Evidence of boiling indicates a pressure of < 100 bars, corresponding to a depth of 500 to 1,250m assummg hthostatlc and hydrostatic pressure regimes, respectively. Fluid inclusion and mineralogical evidence suggest that the electrum-silver mineralization was deposited at a temperature of $220-260^{\circ}C$ from ore fluids with salinities between 1.9 and 8.1 equivalent wt.% NaCl. Total sulfur concentration is estimated to be $10^{-3}$ to $10^{-4}$ molal. The estimated $fs_2$ and $fo_2$ range from $10^{-11.8}$ to $10^{-14}$ atm and $10^{-35}$ to $10^{-36}$ atm, respectively. The chemical conditions indicate that the dominant sulfur species in the ore forming fluids was a reduced form($H_2S$). Rapid cooling and dilution of ore-forming fluids by mixing with less-evolved meteoric waters led to gold-silver deposition through the breakdown of the bisulfide complex($Au(HS)_2$) as the activity of $H_2S$ decreased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.667-676
• /
• 2006

The reduction of $Hg^{2+}$ in the aqueous phase results in the production of dissolved gaseous mercury(DGM), and the volatilization of DGM has been identified as an important mechanism for the loss of Hg from waterbodies to the atmosphere. Although mercury emission in the world is known to be mostly from Asia, there have been few studies of measuring DGM concentrations in lakes in Asia. In this study, DGM concentrations were measured at Juam reservoir($35^{\cir}00'N,\;127^{\circ}14'E$), Korea. The results showed that the average concentrations of DGM at the upper and down stream of the lake during summer time were $95{\pm}8\;and\;130{\pm}15$ pg/L, respectively and the concentration of total mercury(TM) at the upper and down stream was $2.1{\pm}0.7,\;1.7{\pm}0.3$ ng/L respectively. Average DGM concentration during summer time($101{\pm}14pg/L$) was approximately 5.5 times higher than that during fall($18{\pm}0.1pg/L$). The DGM concentrations ai the midstream decreased from 32 to 13.7 pg/L during rain event, while the TM concentrations increased from 2.2 ng/L to 2.7 ng/L indicating the deposition of mercury from the atmosphere. Also, the diurnal patterns between DGM concentrations and UV intensities were observed. Water temperatures and DOC concentrations were significantly related to DGM concentrations, while TM concentrations were negatively related to DGM concentrations(p<0.0001). Comparing with the study of Dill et al.,(2006) the average concentrations of DGM $(109{\pm}15pg/L)\;and\;TM(2.2{\pm} 0.4ng/L)$ at Juam reservoir were approximately 3 and 2.2 times higher than those measured in other lakes(DGM: $38{\pm}16pg/L$, TM: $1.0{\pm}1.2ng/L$).

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.221-235
• /
• 1989

Gold-silver mineralization of the Goryeong-Waegwan area was deposited in three stages of quartz and calcite veins which fill fissures in Cretaceous sedimentary rocks of the Sindong Group. Radiometric dating indicates that mineralization is Late Cretaceous age(98 Ma) likely associated genetically with intrusion of a small biotite granite stock. Fluid inclusion and stable isotope data indicate that Au-Ag ore was deposited at temperatures between $280^{\circ}C$ and $230^{\circ}C$ from fluids with salinities between 1.7 and 8.7 equiv.wt.% NaCl. Evidence of boiling indicates pressures of <100 bars, corresponding to depths of 425 and 1,150m, respectively, assuming lithostatic and hydrostatic loads. Within ore stage I there is an apparent decrease in ${\delta}^{34}S$ values of $H_2S$ with paragenetic time, from +1.4 to -2.5 per mil. This pattern was likely achieved through progressive increases in pH and activity of oxygen accompanying boiling. Measured and calculated hydrogen and oxygen isotope values of ore-forming fluids(${\delta}D$ = -90 to -100 per mil; ${\delta}^{18}O$ = +3.9 to -11.4 per mil) indicate meteoric water dominance, approaching unex-changed meteoric water values. Au-Ag deposition is thought to be the result of cooling and dilution of a boiling fluid through mixing with less evolved meteoric waters.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.775-785
• /
• 1999

Background : The herbicide paraquat can cause severe lung injury and fibrosis in experimental animals. In this study we have investigated the changes in lung endothelin-1(Et-1) levels and immunohistochemical localization in relation to treatment with cyclophosphamide and methylprednisolone in paraquat induced pulmonary fibrosis in guinea pigs. Material and methods : 29 male Hartley guinea pigs were divided into 4 groups. Group I was normal control. Paraquat was instilled into the lung of guinea pig of group II, III and IV unilaterally. Group II was treated with cyclophosphamide and methylprednisolone. Group III was treated with methlprednisolone. Group IV was not treated. The degree of fibrosis was evaluated by H-E stains and Masson's trichrome stains and cell activity was assessed by Et-1 immunohistochemical stains. Statistical evaluation was performed using the Kruskawallis oneway analysis. Results : Paraquat induced an increase in numbers of fibroblasts and total amount of lung collagen in Group IV compared to the normal controls. There was no significant difference in total numbers of fibroblasts between any of paraquat instilled groups, but there was significant increase in total amount of collagen in Group IV compared to group II and III (p<0.05). The treatment of cyclophosphamide and methyprednisolone suppressed the growths of both fibroblasts and collagen, but this suppression was stastically significant only in the case of collagen Et-1 immunoreactivities of bronchial epithelium, type II pneumocytes, endothelial cells and fibroblast in group II and III were decreased compared to those in group IV. Conclusion : These results demonstrate that Et-1 is an important contributing factor in the pathogenesis of pulmonary fibrosis. Et-1 is synthesized and released by bronchial epithelium, Type II pneumocyte, endothelial cells, alveolar macrophages and fibroblasts. Especially they are associated with alveolar macrophage and fibroblasts. We conclude that combined therapy of cyclophosphamide and methylprednisolone are more effective in the control of Et-1 expression and collagen deposition.