• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.9-18
• /
• 2003

Two configurations of Film Bulk Acoustic Wave Resonators with acoustic quater-wave bragg reflector layers are theoretically analyzed using equivalent circuits and the difference of their characteristics are discussed. We compare the characteristics of λ/2 mode to those of ideal FBAR with top and bottom electrode contacting air and the characteristics of λ/4 mode to those of ideal FBAR with top electrode contacting air and bottom electrode clamped. We assume that the piezoelectric film is ZnO, the electrode is A1 and the substrate is Si, ABCD parameters are extracted and input impedance is calculated by converting the equivalent circuit from Mason equivalent circuits to the simplified equivalent circuits that ABCD parameters are extracted possible, From the variation of resonance frequency due to the change of thickness of reflector layers and the variation of electrical Q due to the change of mechanical Q of reflector layers, it is confirmed that the reflector layer just under the bottom electrode have the greatest effect on the varation of resonance frequency and electrical Q. It is shown that the number of reflector layers required for the saturation of electrical Q decreases with the increase of the impedance ratio of reflector layers and electrical Q of λ/2 mode is larger than that of λ/4 mode, Electromechanical coupling factor is independent of the number of layers, The impedance ratio of reflector layers becomes larger as the electromechanical coupling factor becomes larger, The electromechanical coupling factor of the two mode are smaller than those of ideal FBARs because of the trapping of acoustic energy in the reflector layers, The insertion loss of the ladder filter decreases with the increase of the number of reflector layers but the bandwidth is not affected much by the number of reflector layers, As the impedance ratio of reflector layers becomes larger the insertion loss becomes smaller and the bandwidth becomes wider, In our analysis of the two mode, characteristics of λ/2 mode appear to be slightly more favorable than that of λ/4 mode

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.6-15
• /
• 2009

In this paper, a new 4-way search window is designed for the high-performance 2D PE architecture in H.264 Motion Estimation(ME) to improve the memory bandwidth. While existing 2D PE architectures reuse the overlapped data of adjacent search windows scanned in 1 or 3-way, the new window utilizes the overlapped data of adjacent search windows as well as adjacent multiple scanning (window) paths to enhance the reusage of retrieved search window data. In order to scan adjacent windows and multiple paths instead of single raster and zigzag scanning of adjacent windows, bidirectional row and column window scanning results in the 4-way(up. down, left, right) search window. The proposed 4-way search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 3.1, though the 1/3-way search window redundantly requires $7.7{\sim}11$ times of data retrieval. Thus, the new 4-way search window scheme enhances the memory bandwidth by $70{\sim}58%$ compared with 1/3-way search window. The 2D PE architecture in H.264 ME for 4-way search window consists of $16{\times}16$ pe array. computing the absolute difference between current and reference frames, and $5{\times}16$ reusage array, storing the overlapped data of adjacent search windows and multiple scanning paths. The reference data could be loaded upward and downward into the new 2D PE depending on scanning direction, and the reusage array is combined with the pe array rotating left as well as right to utilize the overlapped data of adjacent multiple scan paths. In experiments, the new implementation of 4-way search window on Magnachip 0.18um could deal with the HD($1280{\times}720$) video of 1 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps at 149.25MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.21-31
• /
• 2010

This paper presents a design of PLL and SSCG for reducing the EMI effect at the electronic machinery and tools for DisplayPort application. This system is composed of the essential element of PLL and Charge-Pump2 and Reference Clock Divider to implement the SSCG operation. In this paper, 270MHz/162MHz dual-mode PLL that can provide 10-phase and 1.35GHz/810MHz PLL that can reduce the jitter are designed for 2.7Gbps/162Gbps DisplayPort application. The jitter can be reduced drastically by combining 270MHz/162MHz PLL with 2-stage 5 to 1 serializer and 1.35GHz PLL with 2 to 1 serializer. This paper propose the frequency divider topology which can share the divider between modes and guarantee the 50% duty ratio. And, the output current mismatch can be reduced by using the proposed charge-pump topology. It is implemented using 0.13 um CMOS process and die areas of 270MHz/162MHz PLL and 1.35GHz/810MHz PLL are $650um\;{\times}\;500um$ and $600um\;{\times}\;500um$, respectively. The VCO tuning range of 270 MHz/162 MHz PLL is 330 MHz and the phase noise is -114 dBc/Hz at 1 MHz offset. The measured SSCG down spread amplitude is 0.5% and modulation frequency is 31kHz. The total power consumption is 48mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.1-6
• /
• 2011

A transparent oxide thin film transistors (Transparent Oxide-TFT) have been fabricated by RF magnetron sputtering at room temperature using amorphous indium zinc oxide (a-IZO) as both of active channel and source/drain, gate electrodes and co-sputtered $HfO_2-Al_2O_3$ (HfAIO) as gate dielectric. In spite of its high dielectric constant > 20), $HfO_2$ has some drawbacks including high leakage current and rough surface morphologies originated from small energy band gap (5.31eV) and microcrystalline structure. In this work, the incorporation of $Al_2O_3$ into $HfO_2$ was obtained by co-sputtering of $HfO_2$ and $Al_2O_3$ without any intentional substrate heating and its structural and electrical properties were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The XRD studies confirmed that the microcrystalline structures of $HfO_2$ were transformed to amorphous structures of HfAIO. By AFM analysis, HfAIO films (0.490nm) were considerably smoother than $HfO_2$ films (2.979nm) due to their amorphous structure. The energy band gap ($E_g$) deduced by spectroscopic ellipsometer was increased from 5.17eV ($HfO_2$) to 5.42eV (HfAIO). The electrical performances of TFTs which are made of well-controlled active/electrode IZO materials and co-sputtered HfAIO dielectric material, exhibited a field effect mobility of more than $10cm^2/V{\cdot}s$, a threshold voltage of ~2 V, an $I_{on/off}$ ratio of > $10^5$, and a max on-current of > 2 mA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.1
• /
• pp.141-152
• /
• 1999

The purpose of this study was to identify correlations among family support, self-esteem and compliance in preventive health behavior in elderly people. The results will provide valuable data for nursing interventions towards help the elderly lead better lives. Those who lived with elderly people in Kimchun were interviewed by the researcher and an assistant. The subjects were 191 elderly people over the age of 65. The study method used was a structured questionnaire and the data were collected from September 17th to September 31th in 1998. The tools for this study were the family support scale designed by Gang Hyun Sook, the self-esteem scale designed by Rosenberg and the preventive health behavior scale designed by Gang Yune Sook. The data were analyzed by the SAS program, Mean, SD, T-test, ANOVA, Pearson Correlation Coefficients. The results of this study are as follows : 1. The mean score for family support was 40.49. The score of family support of the elderly showed significant differences according to age(F=2.66, P<.05), spouse presence(t=4.20, P<.001), family pattern(F=4.56, P<.01), economic status (F=10.47, P<.001) and pocket money(F=10.46, P<.001). 2. The mean score for self-esteem was 29.01. The score of self-esteem of the elderly showed significant differences according to educational level(F=3.47, P<.01), spouse presence(t=2.49, P<.05), family pattern(F=3.79, P<.01), economic staus(F=15.65, P<.001) and pocket money(F=14.04, P<.001). 3. The mean score for compliance with preventive health behavior was 53.15. The score of compliance of preventive health behavior of the elderly showed significant differences according to economic status(F=9.34, P<.001) and pocket money(F=8.13, P<.001). 4. The relation between family support and self-esteem was significantly different(r=.57, P<.001). The relation between family support and compliance with preventive health behavior was significantly different(r=.44, P<.001). The relation between self-esteem and compliance with proventive health behavior was significantey different(r=.51, P<.001), In conclusion, the correlations among lamily support, self-esteem and compliance with preventive health behavior in elderly people showed significant differences.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.281-292
• /
• 1997

The objective of this study was to compare retrospectively the survival and pregnancy rates(PR) of cryopresered-thawed embryos obtained from intracytoplasmic sperm injection (ICSI) or conventional in vitro fertilization (IVF). Ninety-six cycles of cryopresered-thawed embryo transfer (ET) were performed in 79 patients from June, 1996 to September, 1997 and grouped as followings: 20 cycles (16 patients) inseminated by ICSI (ICSI Group) and 76 cycles (63 patients) by conventional IVF (IVF Group). Slow-freezing and rapid-thawing protocol was used with 1.5M propanediol (PROH) and 0.1M sucrose as cryoprotectant. All embryos were frozen-thawed at the two pronuclear (2 PN) stage excluding four cycles in which the early cleavage stage embryos were frozen, and allowed to cleave in vitro for one day before ET. The duration from freezing to thawing was comparable in both groups ($mean{\pm}SD$, $112.1{\pm}80.0$ vs. $124.8{\pm}140.1$ days). The age of female ($31.2{\pm}3.4$ vs. $32.6{\pm}3.3$ years) and the endometrial thickness prior to progesterone injection ($9.4{\pm}2.0$ vs. $9.3{\pm}1.8$ mm) were also comparable in both groups. There was no significant difference in the outcomes of cryopreserved-thawed ET between two groups: survival rate ($85.2{\pm}16.1%$ vs. $82.2{\pm}19.7%$), cleavage rate ($96.9{\pm}6.7%$ vs. $94.7{\pm}13.0%$), cumulative embryo score (CES, $54.5{\pm}31.1$ vs. $49.0{\pm}20.0$), preclinical loss rate (5.0% vs. 5.3%), clinical miscarriage rate (0% vs 29.4%), clinical PR per transfer (35.0% vs. 22.4%), implantation rate (9.9% vs. 5.6%), and multifetal PR (42.9% vs. 17.6%). In conclusion, human embryos resulting from ICSI can be cryopreserved-thawed and transferred successfully, and the survival rate and PR are comparable to conventional IVF.

• Journal of Life Science
• /
• v.25 no.4
• /
• pp.456-462
• /
• 2015

We investigated the effects of fermented Sargassum thunbergii (FST) on platelet aggregation and serum lipid levels in rats made obese by a high fat diet. Six-week-old male SD-rats were randomly assigned to four groups as CON, HF-CON induced by high fat diet (HF), ST supplemented with HF (HFST100), and the fermented ST supplemented with HF group (HF-FST100). After 6 weeks, the results showed that the final weight and weight gain had decreased in the HF- FST100 group compared to the HF-CON group. Also, the food efficiency ratio was significantly reduced in the HF-FST100 group compared to HF-CON. The organ weights other than heart and spleen were significantly lower in the HF-FST100 group than in the HF-CON group. The levels of serum GOT and GPT significantly decreased in the HF-FST100 group over the HF-CON group. In addition, the total cholesterol, triglyceride and LDL-cholesterol levels were lower in the HF-FST100 group than in HF-CON, while the HDL-cholesterol level was higher in the HF-FST100. The ability of platelet aggregation of groups supplemented with FST was lower than the HF-CON group. These results suggest that FST may be beneficial in improving lipid profile and platelet aggregation in obesity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.697-704
• /
• 2013

The inhibitory effect of ethanol extracts from Curdrania tricuspidata leaves (CTL) on osteoarthritis was investigated in primary cultured rat cartilage cells and a monosodium-iodoacetate (MIA)-induced arthritis rat model. To identify the effects of CTL 80% ethanol extracts (CTL80) and CTL 10% ethanol extracts (CTL10) against $H_2O_2$ treatment in vitro, cell survival was measured by the MTT assay. Cell survival after $H_2O_2$ treatment increased with CTL80 and CTL10 close to normal up to $300{\mu}g/mL\;H_2O_2$. The mRNA expression of matrix metalloproteinases (MMPs) was determined MMP-7 and MMP-13 (known catabolic factors), were significantly inhibited by CTL 80 and CTL10; a $200{\mu}g/mL$ dose of CTL80 especially decreased MMP-13 expression. In vivo, osteoarthritis was induced by an intra-articular injection of MIA into the knee joints of rats, then CTL80 and CTL10 orally administered daily for 35 days. After the animals were sacrificed, histological evaluations of their knee joints revealed a reduction in polymorphonuclear cell infiltration and smooth synovial lining in the CTL80-500 group. Micro-CT analysis of hind paws from CTL80-500 and CTL10 showed a protection against osteophyte formation, soft tissue swelling, and bone resorption. In conclusion, CTL ethanol extracts are effective in ameliorating joint destruction and cartilage erosion in MIA-induced rats. CTL decreases and normalizes articular cartilage through preventing extracellular matrix degradation and chondrocyte injury, and could potentially serve as a therapeutic treatment for humans.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.106-110
• /
• 2009

In order to reduce the bitter taste and improve the bioavailability of red ginseng extract(RGE), inclusion complexes (RGE-CD) of the extract with ${\alpha}-,\;{\beta}-,\;{\gamma}$-cyclodextrin were prepared and studied for their sensory quality and bioavailability compared to RGE. By complexation, the bitter taste-reducing efficacies of ${\alpha}$-CD and ${\beta}$-CD were much lower than that of ${\gamma}$-CD. In comparative sensory analysis for the bitter taste, RGE-${\gamma}$-CD10, prepared using 10%(w/w) of ${\gamma}$-CD, showed a score of 1.93(decreased by about 78%) compared to RGE as the control. In addition, in sensory analysis for flavor, RGE-${\gamma}$-CD10showed a score of 5.60. Upon increasing the amount of ${\gamma}$-CD to 15%(w/w) and 20%(w/w), respectively, the bitter taste of RGE-${\gamma}$-CD was removed and the flavor of RGE disappeared(scores of 2.67 and 1.67, respectively). Therefore RGE-${\gamma}$-CD10 was chosen as an optimum. The same dosages of RGE and RGE-${\gamma}$-CD10 were orally administered to SD(Sprague-Dawley) rats on a saponin basis, and the plasma concentrations of ginsenoside Rg1 and Rb1 were measured over time to estimate the average AUC(area under the plasma concentration versus time curve) of the ginsenosides. After the oral administration, there were no significant differences in the AUC values of the RGE and RGE-${\gamma}$-CD 10 groups for ginsenoside Rg1. However, AUC values for ginsenoside Rb1 were $25.8{\mu}g{\cdot}hr/mL$ in the RGE group and $81.5{\mu}g{\cdot}hr/mL$ in the RGE-${\gamma}$-CD 10 group, respectively. Therefore, the bioavailability of ginsenoside Rb1 in the RGE-${\gamma}$-CD 10 group was significantly higher by up to 315% compared with that in the RGE group(p = 0.0029). These results show that the bitter taste of RGE can be simultaneously removed by the complexation of RGE and ${\gamma}$-CD(RGE-${\gamma}$-CD) along with increased bioavailability.