• 한국대기환경학회지
• /
• 제6권1호
• /
• pp.85-96
• /
• 1990

Simultaneous removal efficiencies of hydrophilic and hydrophobic gaseous pollutants are experimentally determined, and the macroscopic removal mechanism of pollutants in a dry scrubber is analyzed using the extended model of three phase equilibrium distribution of pollutant at high temperatures that can describe the different morphological conditions of adsorbent and water at varying relative humidities. For the simplicity, the inside of spray dryer is divided into three regions of ; (1) absorption, (2) three-phase equilibrium, and (3) adsorption, and the removal efficiencies of each pollutants at three regions are observed at different experimental conditions to estimate the effects of important parameters of dry scrubber. The laboratory experiments simulate the three regions of spray dryer with the temperature control and thus evaporation rate of water from the slurry particle. $SO_2$ as a hydrophilic gaseous pollutant and vinyl chloride as a hydrophobic toxic gas are selected for the future field application to soid waste incineration, and the two types of slurry are made of the two sorbents ; 10 wt.% $Ca(OH)_2$, and 10 wt.% NaOH. Result of temperature effect shows the height of absorption plus three-phase region is decreased as the operation temperature is increased, which results in the lower removal efficiency of $SO_2$ but higher removal for vinyl chloride in the adsorption region of dry scrubber. The removal efficiency of $SO_2$ is higher by NaOH slurry than by $Ca(OH)_2$ slurry due to the hygroscopic nature of NaOH, while the removal of vinyl chloride is higher in $Ca(OH)_2$ case. From the analysis of redults using three-phase equilibrium distribution model, the effective two-phase partition coefficients can be obtained, and the possible extention in the application of the three-phase equilibrium model in a dry scrubber design has been demonstrated.

• 농업과학연구
• /
• 제20권1호
• /
• pp.9-17
• /
• 1993

'후지' 사과의 저장 및 유통 과정에서의 상품성 향상을 위한 몇가지 수확 후 처리기술을 검토한 결과 다음과 같은 결과를 얻었다. Polyethylene film 포장은 저장 중의 수분손실 방지에 따른 감량억제에 탁월한 효과를 보여 주었으나 저장기간이 걸어짐에 따라 PE 대내의 ethylene 축적으로 인한 과실의 노화가 심하였다. Polyethylene 포장과 ethylene scrubber를 함께 포장한 경우 저장 12주까지 선도유지에 효과적이었으나 장기저장에서는 ethylene scrubber의 효과가 저하되어 선도유지에 대한 효과가 감소되었다. 피막제 중 Prolong 처리는 감량 방지에 대한 효과가 인정되지 않았으나 수용성 wax 처리는 효과적이었다. 그러나 wax 처리는 일부 과실에서 조직의 괴사를 수반하는 장해를 유발하였으나 장해를 받지 않은 과실은 저장 21주까지 매우 신선한 상태를 유지하였다.

• 농업과학연구
• /
• 제20권1호
• /
• pp.1-8
• /
• 1993

동양배 과실의 수확후 처리 중 polyethylene film 포장은 저장중 수분상실에 의한 감량 방지에 매우 효과적이었으나 과피흑변을 증가시킬 수 있으며 장기간 저장시에는 오히려 상품성을 저하시킬 우려가 있다. Ethylene 제거제는 장기저장시 과피면의 생리적 장해의 발생을 다소간 억제시킨 결과를 나타내였으나 심부현상에는 뚜렷한 효과를 나타내지 않았다. 따라서 ethylene 제거제의 활용은 polyethylene film 포장내에 삽입하여 적용하는 것보다는 저장고내의 ethylene을 직접적으로 제거하는데 활용하는 것이 효과적일 것으로 확인되었다. 피막제 Prolong 처리는 과피변을 과습하게 하여 저장중 심한 흑변을 일으킬 수 있고 또한 감량방지 효과가 인정되지 않아 저장전 처리방법으로는 부적합하였다.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.85-92
• /
• 2020

Wet Scrubber reacts the incoming pollutant gas with cleaning water (water + absorbent) to absorb pollutants and release the clean air to the atmosphere. Wet scrubbers and packed tower scrubbers using this principle are widely used in businesses that emit acid gases. In particular, in the etching process using hydrochloric acid (HCl), alkaline washing water (NaOH) having a pH of about 8 to 11 is used to absorb a large amount of acid gas. However, These salts are attached to the injection nozzle (nozzle), filling material (packing), and the demister (Demister), causing air pollution, human damage, and inoperability due to clogging and acid gas discharge. Therefore, In this study, an improvement plan was proposed to manage the washing water with pH 3~4 acidic washing water. The test method takes samples from the Wet Scrubber flue measurement laboratory twice a month for 1 year. Hydrogen chloride (HCl) concentration (ppm) was measured, and nozzle clogging and scale conditions were measured, compared, and analyzed through a differential pressure gauge and a pressure gauge. As a result of the check, it was visually confirmed that the scale was reduced to 50% or less in the spray nozzle, filler, and demister. In addition, the emission limit of hydrogen chloride in accordance with the Enforcement Regulation of the Air Quality Conservation Act [Annex 8] met 3 ppm or less. Therefore, even if the washing water is operated in an acidic pH range of 3 to 4, it is expected to reduce air pollution and human damage due to clogging of internal parts, and it is expected to reduce maintenance costs such as regular cleaning or replacement of parts.

• Safety and Health at Work
• /
• 제13권3호
• /
• pp.357-363
• /
• 2022

Background: Refractory ceramic fibers (RCFs) are a suspected carcinogen but have been widely used as insulations. Depending on the temperature, RCFs can transform into crystalline SiO₂, which is a carcinogen that can be present in the air during bulk RCF handling. This study analyzed the physicochemical and morphological characteristics of RCFs at high temperatures and determined the exposure levels during the semiconductor scrubber maintenance. Methods: Sampling was conducted at a company that manufactures semiconductor scrubbers using RCFs as insulation. Bulk RCF samples were collected both before and after exposure to a scrubber temperature of 700℃. Airborne RCFs were collected during scrubber maintenance, and their characteristics were analyzed using microscopes. Results: The components of bulk RCFs were SiO₂ and Al₂O₃, having an amorphous structure. Airborne RCFs were morphologically different from bulk RCFs in size, which could negatively affect maintenance workers' health. 58% of airborne RCFs correspond to the size of thoracic and respirable fibers. RCFs did not crystallize at high temperatures. The exposure caused by airborne RCFs during the scrubber frame assembly and insulation replacement was higher than the occupational exposure limit. Conclusion: Workers conducting insulation replacement are likely exposed to airborne RCFs above safe exposure limits. As RCFs are suspected carcinogens, this exposure should be minimized through prevention and precautionary procedures.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.190-195
• /
• 2004

The pressure drop in a Venturi Scrubber is predicted using the Eulerian-Lagrangian Method, which is one of the numerical methods to solve the dispersed two-phase flow. KIVA-3V Code is modified to solve the coupled gas-liquid two-phase flow field. The liquid is assumed to be injected through the nozzles with the Rosin-Rammler drop size distribution. The computational results shows good agreement with the experimental data.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.98-104
• /
• 2006

A charged droplet scrubber was introduced to remove visible smokes generated in many industrial facilities. Lab-scale and field tests were conducted in this study. The system consists of a corona discharger to effectively charge the fine particles, fellowed by an electrostatic chamber to promote coagulation between charged fine particles and oppositely charged droplets and a demister to remove resultant particles. Overall collection efficiency, 98.4% was obtained from a lab-scale test, when a high voltage was applied to an ionizer and a charged droplet scrubber. Field tests also show the high collection efficiencies, 93.5% with one stage and 99.4% with two stage system. This system can be used to increase the collection efficiency of the conventional air pollution control devices to satisfy the national emission standard.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2390-2392
• /
• 1998

In this paper, we discuss the development of monitoring system with data process equipment which transfers data from Remote Terminal Unit(RTU) to monitoring computer. The RTUs sense temperature, pressure and PLC(Programmable Logic Controller) nodes conditions of scrubber in semiconductor manufacture processing. The data Process equipment is connected every RTU and a monitoring computer through serial communication. This equipment receives informations from RTU, process data, and transfers them to monitoring computer. To avoid congestion in data communication, task scheduling algorithm used RT O/S(Real-Time Operating System) is embedded in ROM which is a part of data Process equipment.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.214-223
• /
• 2020

본 연구는 L-alanine을 적용한 스크러버의 주류공장 내 CO₂ 제거효율, 모니터링 데이터 분석/평가 및 에너지 저감효율을 평가하였다. 스크러버의 평균 제거율은 90.45%로 10,000 ppm이상의 고농도 CO₂가 유입됨에도 제거효율이 뛰어난 것을 확인하였다. 스크러버 작동 후 작업장 내 CO₂는 2,000ppm 이하로 유지하여 약 74% 이상의 이산화탄소 저감 효율을 확인하였다. 또한 소비되는 전력량을 측정한 결과 스크러버 작동 후 230 kWh로 약 7.26%의 에너지가 절감되는 것으로 나타났다. 즉, 본 개발제품을 적용한 결과로 작업장 내 이산화탄소 농도를 외기유입 없이 낮은 농도로 유지함에 따라 근무자의 작업환경을 개선시킬 수 있었으며 에너지 소비량 또한 저감할 수 있었다. 그러므로 식품, 주류공장 내 고농도 CO₂ 제거 공정으로써 스크러버가 유용할 것으로 기대된다.

• 공업화학
• /
• 제29권5호
• /
• pp.510-518
• /
• 2018

최근에 반도체 산업의 지속적인 발전에 따라 반도체 생산공정에서 발생하는 다양한 오염가스를 처리하는 기술에 대한 관심도 늘어나고 있다. 이처럼 반도체 공정 후 배출되는 폐가스를 제거하는 장치 중의 하나로서 다양한 종류의 스크러버 시스템이 사용되고 있다. 이러한 스크러버 시스템 내 열분해반응기 성능은 폐가스 내 오염원 제거효율과 전반적인 운전안정성에 영향을 미치기 때문에 열분해 반응기의 효율적인 설계가 매우 중요하다. 본 연구에서는 수치해석 방법을 기반으로 반응기 내 폐가스의 열유동 특성을 파악하고자 하였다. 해석기법을 검증하기 위해 온도분포에 대한 해석결과를 실험결과와 비교하였다. 온도결과에 대한 해석과 실험은 약 1.27~2.25% 수준의 낮은 오차를 보였으며 이를 통해 해석결과의 타당성을 확보하였다. 검증된 해석기법을 이용하여, 기존 반응기의 성능개선을 위한 설계 가이드라인을 제시하기 위해 폐가스 형상 변화에 따른 해석을 수행하여 기존모델 및 수정모델에서 폐가스의 거동특성을 비교분석하였다. 본 연구에서 수행한 결과는 다양한 스크러버 시스템 내 열유동 특성을 분석하는데 기초자료로 활용될 수 있을 것으로 기대한다.