• 제목/요약/키워드: Screws

검색결과 645건 처리시간 0.023초

3차원 전신 정위 방사선 치료 장치의 개발 (Development of the Whole Body 3-Dimensional Topographic Radiotherapy System)

  • 정원균;이병용;최은경;김종훈;안승도;이석;민철기;박참복;장혜숙
    • 한국의학물리학회지:의학물리
    • /
    • 제10권2호
    • /
    • pp.63-71
    • /
    • 1999
  • 입체조형 치료와 전신 방사선 수술에의 이용을 목적으로 3차원 전신 정위 방사선 치료 장치를 개발하였다. Couch 위에 놓을 수 있는 전신 정위 치료판을 제작하여 방사선 비투과성 카테타 선을 이용하여 치료판 위에 좌표계를 설치하고, MeV-Green(전성 물산, 한국)으로 고정틀을 만들어 환자 자세를 고정시키고, 플라스틱 봉과 봉 지지판을 이용하여 고정틀을 고정하였다. 이러한 설계, 제작으로 입체 조형 치료 등에서 갠트리 회전에 의한 기하학적 제약을 최소화하고 방사선 조사 투과율 이 특정한 방향에서 영향을 받는 문제점을 해소하였다. CT 영상을 통해 치료 표적의 위치를 파악하고 치료판 기준점에 대하여 좌표화하여 모의 치료시와 방사선 치료시의 환자 자세 변화 오차를 줄였다. 3대의 CCTV 카메라를 사용하여 환자 자세 변화를 감지, 수정함으로써 체표변의 외곽선으로 부터 setup 오차를 최소화 할 수 있었다. 치료 효용성을 높이기 위해 이러한 과정을 모니터를 보면서 실시간으로 처리 할 수 있도록 하였고, IDL(Interactive Data Language, RSI, U.S.A.)을 사용하여 image subtraction 방식으로 환자 자세 변화를 가시화하여 오차를 줄이도록 하였다. 내부 장기 움직임에 따른 표적의 움직임을 추적할 목적으로 rotating X-ray 장치를 제작하였다. Landmark 나사를 표적주위 뼈나 표적중심에 삽입하여 이 rotating X-ray 장치를 이용해서 anterior, lateral 두 방향에서 얻은 영상 정보로부터 marker 에 대한 표적의 위치 변화를 가시화 하여 내부 표적의 움직임에 따른 setup 오차를 줄였다. CT 모의치료를 할 수 있도록 IDL 을 이용하여 PC용 모의치료 프로그램을 GUI 환경에서 구현하였고 이 프로그램을 통해서 치료 계획을 위해 CT 에서 수집된 영상정 보를 이용하여 표적을 포함한 장기들의 그래픽 처리, 편집, 전송 등의 작업을 수행하도록 하였다.

  • PDF

족무지 외반증에서 $60^{\circ}$ 원위부 갈매기형 절골술과 $40^{\circ}$ 원위부 갈매기형 절골술 간의 방사선학적 비교 (Radiological Comparison between $60^{\circ}$ Distal Chevron Osteotomy and $40^{\circ}$ Distal Chevron Osteotomy in Hallux Valgus)

  • 라종득;박현수;임창석;장영수;전용수;진현배;김경훈
    • 대한족부족관절학회지
    • /
    • 제9권2호
    • /
    • pp.146-150
    • /
    • 2005
  • Purpose: We made a radiological comparison between $60^{\circ}$ distal Chevron osteotomy with short armed two parts and $40^{\circ}$ distal Chevron osteotomy with long armed one part performing operation in cases of hallux valgus angle of less than $40^{\circ}$, intermetatarsal angle of less than $15^{\circ}$. Materials and Methods: 12 cases with $60^{\circ}$ distal Chevron osteotomy and 12 cases with $40^{\circ}$ distal Chevron osteotomy were selected from October 2000 to March 2005. We have analysed the hallux valgus angle, 1-2 intermetatarsal angle, metatarsal length, distal metartarsal articular angle and angulation at osteotomy site on lateral view in each radiological films taken at preoperative, postoperative and 3 months after operation presuming bone union. All cases were women, both sides were 9 cases and average age was 52.3 years old. Results: Data taken at preoperative, postoperative and 3 months follow up films in $60^{\circ}$ distal Chevron osteotomy were as follows; the hallux valgus angles were $32.1^{\circ}$, $10.9^{\circ}$, $13.8^{\circ}$, the 1-2 intermetatarsal angles were $13.6^{\circ}$, $8.5^{\circ}$, $8.4^{\circ}$, the metatarsal length were 60.6 mm, 58.8 mm, 58 mm, the distal metartarsal articular angles were $13^{\circ}$, $6^{\circ}$, $6.6^{\circ}$ and 3 cases were over $3^{\circ}$ angulation at lateral view. In $40^{\circ}$ distal Chevron osteotomy, the hallux valgus angles were $34.5^{\circ}$, $11.6^{\circ}$, $15.3^{\circ}$, the 1-2 intermetatarsal angles were $12.7^{\circ}$, $8.2^{\circ}$, $7.8^{\circ}$, the metatarsal length were 59.2 mm, 56.9 mm, 55.9 mm, the distal metartarsal articular angles were $12^{\circ}$, $7.3^{\circ}$, $7.3^{\circ}$ and there were no case with angulation over $3^{\circ}$ at lateral view. Conclusion: In comparison between $60^{\circ}$ distal Chevron osteotomy and $40^{\circ}$ distal Chevron osteotomy measuring at postoperative and follow up, most of all data were similar, but 3 cases over $3^{\circ}$ angulation at lateral view happened in $60^{\circ}$ Chevron osteotomy. This result showed that $40^{\circ}$ distal Chevron osteotomy fixing with screws through long armed one part may have benefit than $60^{\circ}$ distal Chevron osteotomy fixing with K-wires through short armed two parts in making rigid fixation, even though there is a personal difference of technigue.

  • PDF

견봉 쇄골 관절 탈구의 수술적 치료에서 두 가지 갈고리 금속판의 임상적 비교 - AO Hook Plate와 Wolter Plate - (Clinical Comparison of Two Types of Hook Plate in Surgical Treatment of Acromioclavicular Dislocation - AO Hook Plate and Wolter Plate -)

  • 최재열;김유진;정화재;안진환;신헌규;박세진;이승희;이재욱;최규보
    • Clinics in Shoulder and Elbow
    • /
    • 제15권2호
    • /
    • pp.123-129
    • /
    • 2012
  • 목적: 견봉 쇄골 탈구의 수술적 치료에서 갈고리 금속판의 견봉측 고정장치 (acromial locking system)가 유용한지에 대한 조사를 위하여 견봉측 고정장치가 있는 Wolter 금속판과 그것이 없는 AO hook 금속판 두 가지 방법의 임상적 결과와 합병증을 비교하고자 하였다. 방법: Rockwood 분류 III-V형의 견봉 쇄골 관절 탈구로 수술한 환자 중 1년 이상 추시가 가능했던 71명을 대상으로 하였다. 이 중 Wolter 금속판을 이용하여 수술을 한 환자 39명, AO hook 금속판을 이용한 환자가 32명이었다. 술 후 평가는 Constant-Murley 평가 지표를 이용하여 수술 후 약 1개월, 3개월, 6개월, 12개월에 관절 기능을 점수화하고 운동범위를 측정하였으며 금속판과 골의 방사선적 합병증을 조사 하였다. 결과: 수술 후 1년 추시 Constant-Murley score는 Wolter 금속판 $85.2{\pm}5.3$점, AO Hook 금속판 $83.2{\pm}6.8$점으로 유의한 차이 없이 우수하였다. 운동범위는 수술 후 1개월 및 3개월에서 Wolter 금속판의 운동 범위가 유의하게 높게 호전 되었으나 6개월 이후에는 AO hook 금속판과 차이가 없었다. 수술 후 합병증으로 Wolter 금속판은 4예에서 방사선상 나사못의 이완 및 파열이 나타났으며, AO hook 금속판은 7예에서 견봉하 골용해 소견과 금속판 주위 골절이 나타났다. 결론: 견봉측 고정장치 유무에 상관없이 두 가지 수술 방법 모두 장기적인 임상 결과는 우수하며, 유용한 방법이라고 생각되나 견봉측 고정장치가 없는 AO hook 금속판이 수술 후 초기에 관절운동 제한이 더 많이 관찰 되었으며, 견봉의 골용해도 많았다. 그러나 Wolter 금속판은 큰 절개가 필요하다는 등의 단점이 있고 나사못의 이완 및 파열, 견봉 골절 등이 나타날 수 있어 두 방법 각각의 장단점이 있다고 판단되었다.

A Computed Tomography-Based Anatomic Comparison of Three Different Types of C7 Posterior Fixation Techniques : Pedicle, Intralaminar, and Lateral Mass Screws

  • Jang, Woo-Young;Kim, Il-Sup;Lee, Ho-Jin;Sung, Jae-Hoon;Lee, Sang-Won;Hong, Jae-Taek
    • Journal of Korean Neurosurgical Society
    • /
    • 제50권3호
    • /
    • pp.166-172
    • /
    • 2011
  • Objective : The intralaminar screw (ILS) fixation technique offers an alternative to pedicle screw (PS) and lateral mass screw (LMS) fixation in the C7 spine. Although cadaveric studies have described the anatomy of the pedicles, laminae, and lateral masses at C7, 3-dimensional computed tomography (CT) imaging is the modality of choice for pre-surgical planning. In this study, the goal was to determine the anatomical parameter and optimal screw trajectory for ILS placement at C7, and to compare this information to PS and LMS placement in the C7 spine as determined by CT evaluation. Methods : A total of 120 patients (60 men and 60 women) with an average age of $51.7{\pm}13.6$ years were selected by retrospective review of a trauma registry database over a 2-year period. Patients were included in the study if they were older than 15 years of age, had standardized axial bone-window CT imaging at C7, and had no evidence of spinal trauma. For each lamina and pedicle, width (outer cortical and inner cancellous), maximal screw length, and optimal screw trajectory were measured, and the maximal screw length of the lateral mass were measured using m-view 5.4 software. Statistical analysis was performed using Student's t-test. Results : At C7, the maximal PS length was significantly greater than the ILS and LMS length (PS, $33.9{\pm}3.1$ mm; ILS, $30.8{\pm}3.1$ mm; LMS, $10.6{\pm}1.3$; p<0.01). When the outer cortical and inner cancellous width was compared between the pedicle and lamina, the mean pedicle outer cortical width at C7 was wider than the lamina by an average of 0.6 mm (pedicle, $6.8{\pm}1.2$ mm; lamina, $6.2{\pm}1.2$ mm; p<0.01). At C7, 95.8% of the laminae measured accepted a 4.0-mm screw with a 1.0 mm of clearance, compared with 99.2% of pedicle. Of the laminae measured, 99.2% accepted a 3.5-mm screw with a 1.0 mm clearance, compared with 100% of the pedicle. When the outer cortical and inner cancellous height was compared between pedicle and lamina, the mean lamina outer cortical height at C7 was wider than the pedicle by an average of 9.9 mm (lamina, $18.6{\pm}2.0$ mm; pedicle, $8.7{\pm}1.3$ mm; p<0.01). The ideal screw trajectory at C7 was also measured ($47.8{\pm}4.8^{\circ}$ for ILS and $35.1{\pm}8.1^{\circ}$ for PS). Conclusion : Although pedicle screw fixation is the most ideal instrumentation method for C7 fixation with respect to length and cortical diameter, anatomical aspect of C7 lamina is affordable to place screw. Therefore, the C7 intralaminar screw could be an alternative fixation technique with few anatomic limitations in the cases when C7 pedicle screw fixation is not favorable. However, anatomical variations in the length and width must be considered when placing an intralaminar or pedicle screw at C7.

지대주의 반복적인 착탈에 따른 임플랜트 고정체의 external hexagon과 지대주 internal hexagon의 변화에 관한 연구 (SURFACE CHANCE OF EXTERNAL HEXAGON OF IMPLANT FIXTURE AND INTERNAL HEXAGON OF ABUTMENT AFTER REPEATED DELIVERY AND REMOVAL OF ABUTMENT)

  • 정석원;김희중;정재헌
    • 대한치과보철학회지
    • /
    • 제43권4호
    • /
    • pp.528-543
    • /
    • 2005
  • Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.

성견의 하악골에 식립된 Miniplate에 가한 조기 부하의 영향에 관한 실험적 연구 (The experimental study of early loading on the Miniplate in the beagle dog)

  • 정용구;이영준;정규림
    • 대한치과교정학회지
    • /
    • 제33권4호
    • /
    • pp.307-317
    • /
    • 2003
  • 본 연구는 miniplate(Titanium C-tube, Martin Co., Germany)를 교정적 고정원으로 사용하여 교정력 및 악정형력을 즉시 가했을 때 miniplate의 안정성 및 주위 조직 반응을 관찰하여 고정원으로서의 유용성을 밝히고자 시행되었다. 네 마리의 비글 성견을 대상으로 하악의 좌우 협측 제3소구치와 제4소구치 사이에 두개의 titanium miniscrew(직경 2.0mm, 길이 7.0mm)에 의해 고정되는 miniplate를 식립하여 15주 동안 200-250gm의 힘을 가한 교정력 적용군과 8주 동안 400-450gm의 힘을 가한 악정형력 적용군으로 분류하였고 대조군은 제4소구치와 제1대구치사이에 식립하고 힘을 가하지 않았다. 동요도는 식립 직후와 희생 직전에 측정하여 비교하였고 희생 후 제작된 조직 절편을 방사선적으로 검사하여 주위 골의 흡수 여부를 관찰하였다. 실험 동물은 관류 고정하고 조직 절편은 레진 포매하여 비탈회 경조직 표본을 제작하였다 miniplate 제거 후의 조직의 치유와 연조직의 관찰을 위해 일부 조직편은 탈회 표본으로 제작하였다. 표본은 H&E 염색 후 광학 현미경하에서 검경하였고 위의 실험내용을 통해 다음과 같은 결과를 얻었다. 1. 교정력과 악정형력을 적용한 두 그룹 모두 miniscrew와 골간의 계면에는 직접적인 골유착이 일어났다. 힘의 크기에 따른 차이는 관찰되지 않았고, 힘의 적용기간이 증가함에 따라 골침착이 증가되었으며, 하중이 가해지지 않은 대조군이 실험군에 비해 골조직이 덜 침착되었다. 2. Miruplate와 miniscrew를 피개하고 있는 연조직은 염증소견 없이 모두 치유가 잘 일어났다. 3. 모든 실험군에서 동요도는 발생되지 않았고, 하중이 가해지지 않은 대조군의 경우 경미한 동요도를 보였으며, 교합력이 직접 가해진 대조군에서 고정원이 탈락될 정도의 동요도를 보였다. 4. Miniscrew 제거 후의 연조직 및 경조직은 정상조직의 형태와 구조로 치유되었다. 이상의 결과로 miniplate(Titanium C-tube, Martin Co., Germany)는 식립 즉시 악정형력 정도의 힘까지 수용할 수 있고, 인접 조직에 자극이 적은 골내 고정원으로서 충분한 가치가 있다고 판단되어 진다.

상완골 근위부 골절의 수술적 요법 (Operative treatment for Proximal Humeral Fracture)

  • 박진영;박희곤
    • 대한정형외과스포츠의학회지
    • /
    • 제2권2호
    • /
    • pp.168-175
    • /
    • 2003
  • 근위 상완골 골절은 골절의 형태에 따라 크게 관절편 또는 해부학적 경부, 대 결절, 소 결절, 상완골 간부 또는 외과적 경부의 4개의 골절편으로 나눌 수 있다. 현재 널리 사용되고 있는 Neer의 근위 상완골 골절의 분류는 골절선에 의해 골절편을 나누는 분류가 아니며, 1 cm이상전이나 45$^{\circ}$ 이상의 각형성 이 있는 경 우를 전 이 골절편으로 생각하였다. 골절에 대한 관혈적 정 복 및 내고정술의 일차적 적응증은 골다공증이 없는 젊은 환자에서 발생된 튼튼한 내고정물을 시행할 수 있는 삼분 골절로 만족할 만한 결과를 위해 술후 오랜 기간동안 시행할 재활치료에 잘견딜수 있는 활동력 이 좋은 환자여야 한다. 수술적 치료의 절대적 적응증은 개방성 골절 ,혈관이 나 신경 손상이 동반될 때 , 정복이 불가능한 골절 탈구등이다. 반대로 환자가 골다공증이 심하거나, 근위 상완 골절편의 분쇄정도가 심하며 , 튼튼한 내고정을 시행할 가능성 이 희박한 나이가 많은 경 우에는 관혈적 정복 및 내고정술보다 일차적 인공삽입물을 이 용한 관절성형 술을 시행한 후 조기 재활 치료를 시행하는 것을 고려할 수 있다. 상완골 근위부 골절의 수술적 요법에는 다양한 수술 기법과 이에 따른 여러 합병증이 발생할 수 있으며 지속적 이고 체계적 인 재활 치 료가 꼭 필요하다. 여러 수술 기 법 중 관혈적 정복 및 장력 대 강선 기법을 시행할 때 만족할 만한 결과를 얻 을 수 있다. 이 방법 은 수술적 기법이 어렵지 않고, 골에 대한 고정과 함께 회전근 개의 건부착 부위에 대한 봉합을 추가할 수 있으나 역시 여러 가지 합병증이 있으므로 골절의 양상이 나 환자의 상태 ,환자의 활동력 등을 고려하여 치료 방법을 결정하여야 할것으로 사료된다.EX>46N으로, 슬개건-티타늄 간섭나사군이평균 1067.4$\pm$145N에서평균 601.8$\pm$134N으로, 슬개건-생체흡수성간섭나사군이평균 987.1$\pm$168N에서588.7$\pm$124N으로각각40$\%$, 39$\%$, 50$\%$, 24$\%$, 44$\%$, 40$\%$가감소하였다. 결론: 수술후초기고정력은슬괵건을LA나사(R) 또는Semifix(R)로고정하는방법과슬개건을티타늄및생체흡수성간섭나사로고정하는방법등이우수하였으며, 슬괵건을생체흡수성간섭나사나Endobutton(R)으로 고정하는 방법 등은고정력이 상대적으로매우약함을 알수있었다. 최대인장력은단순인장검사로는이상의대퇴골측고정방법의고정력이초기부하를견뎌내는데충분하다고생각되었으나주기성부하실험후현저히감소되어충분한초기안정성을제공하지못함을알수있었다.를 나타내었다. 또한 3m깊이에서의 측방 선량분포에서 Spoiler의 거리변화(6, 10cm)는 심부선량의 변화에 영향을 주지 않는 것으로 확인할 수 있었다. 그리고 위의 실험측정치를 치료계획 시스템에 입력하여 선량분포를 확인한 결과 Spoiler를 사용하는 경우 OPEN에 비해 선량분포 영역을 표면으로 끌어 올릴 수 있으며 Bolus 보다 피부 보호효과는 어느 정도 유지가 되는 것을 보여주었다. 4.결론 이와 같이 Spoiler는 Bolus와 비교하여 6MV 광자선의 build up 영역을 표면으로 증가시키는 동시에 Skin Sparing(피부보호)효과를 유지할 수 있으며 두경부암의 치료에서 Spoiler의 사용이 가능한 조건으로는 조사면이

  • PDF

견봉 쇄골 관절의 손상을 동반한 원위 쇄골 골절의 수술적 치료 (Operative Treatment of Distal Clavicle Fracture with Acromioclavicular Joint Injury)

  • 강호정;고일현;주종환;천용민;김형식
    • Clinics in Shoulder and Elbow
    • /
    • 제14권1호
    • /
    • pp.59-66
    • /
    • 2011
  • 목적: 견쇄관절의 손상이나 원위 쇄골 골절의 치료에 대해서는 많은 연구가 있으나, 견쇄관절 손상을 동반한 원위 쇄골 골절의 치료에 대해서는 알려진 바가 적다. 저자들은 견쇄관절의 손상을 동반한 원위 쇄골 골절의 수술적 치료 및 결과, 예후를 평가하고자 한다. 대상 및 방법: 견쇄관절의 손상을 동반한 쇄골 외측단에서 2.5 cm 내를 침범한 원위 쇄골 골절로 수술적 치료를 받은 21명 (21예)의 환자를 대상으로 후향적 연구를 시행하였다. 단순 방사선 사진과 CT상 원위 쇄골의 골절선이 견쇄관절로 연장 (5예)되어 있거나, 7 mm 이상의 견쇄관절의 이개 (separation)가 있는 관절내 골절 (9예), 또는 건측과 비교해서 50% 이상 원위 쇄골의 상방전위가 있는 관절내 골절 (7예)을 견쇄관절의 손상이 있는 경우로 분류하였다. Craig 분류상 III형이 16예, V형이 5예였다. 금속판 (9예), 소형나사 (1예), K 강선 및 긴장대 강선 (10예) 및 경 견쇄관절 K 강선 (1예)을 사용하여 골절을 고정하였다. 건측에 비해 100%이상 원위 쇄골의 상방전위가 있었던 1예 및 골편이 작아 고정력이 약하다고 판단된 1예에서 경 견쇄관절(transarticular AC joint) K 강선 고정을 추가적으로 실시하였다. 견봉 쇄골 인대 또는 오구 쇄골 인대의 봉합이나 재건술은 시행하지 않았다. 결과: 21예 중 20예에서 골유합을 얻었으며 골유합까지의 기간은 평균 8.4주이었다. 최종 추시시 5예에서 견쇄관절의 외상성 관절염이 관찰되었고, 4예에서 견쇄관절의 이개가, 2예에서 건측과 비교하여 50% 이하의 상방전위가 남아 있었으나 견쇄관절의 이개 및 상방전위가 술전보다 증가된 예는 없었다. Kona 등의 기준에 따른 기능적 평가상 19예에서 우수, I예에서 양호, 1예에서 보통의 결과를 얻었다. 견쇄관절 손상의 분류에 따른 UCLA 점수는 I형에서 32.6점, II형에서 34점, III형에서 34.1점이었다. 술전 견쇄관절 손상 종류, 술후 잔여 관절의 이개 및 전위, 외상성 관절염의 유무와 임상 결과간에 유의한 연관성은 관찰되지 않았다 (p>0.05). 합병증으로는 K 강선 및 긴장대 강선 고정술로 고정한 1예에서 불유합이 관찰되어 술후 3개월 금속판 고정술 및 골이식술을 시행하여 골유합을 얻었으며, 금속판 고정술을 시행한 1예에서 추시 관찰 중 내고 정물의 이완이 있었으나 추가적인 치료 없이 골절이 유합되었다. 결론: 견쇄관절로 연장된 골절이 있거나 관절내 골절이 있으면서 견쇄관절 간격이 7 mm 이상 벌어진 경우 또는 정상측과 비교하여 50% 이상 원위 쇄골의 상방전위가 있는 견쇄관절의 손상이 동반된 경우라도 원위 쇄골의 정확한 정복과 견고한 내고정을 통해 만족할 만한 결과를 얻었다. 수술 전 견쇄관절의 손상 종류 및 수술 후 경도의 외상성 관절염이나 이개, 상방전위와 임상적 기능 사이에 유의한 연관성은 없었다.

성견 하악 골체부 신장시 신장부위의 증식세포핵항원과 제 1형 교원질 발현에 관한 연구 (EXPRESSION OF PROLIFERATING CELL NUCLEAR ANTIGEN AND TYPE I COLLAGEN IN THE ELONGATED BONE IN THE MANDIBLE OF ADULT MONGREL DOGS)

  • 임순모;안병근;박영주;박희건;박준우;이건주;이용찬;조병욱
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권5호
    • /
    • pp.385-396
    • /
    • 2001
  • The purpose of this experiment was to examine the histological changes and the pattern of expression of proliferating cell nuclear antigen(PCNA) and type I collagen in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. Seven adult male mongrel dogs weighing over 20kg were used for this experiment. The author excluded 3 animals because they died before the planned time of sacrifice. The custom-made linear extraoral device and 4 bicortical fixation screws 2.3mm in diameter, 50mm in total length, 15mm in screw length were used in each animal. The distal part of the distractor produced a 0.75mm gap between proximal and distal bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side from each animal was experimental side and the left side was left intact and served as control. At the experimental side, the mandibular body was osteotomized. After 5-day latency period, the segments were distracted with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were sacrificed at the 4th. 17th, and 32th day after the end of the distraction. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with Masson trichrome and examined under the light microscope. The immunohistochemical examinations using anti-PCNA antibody and anti-type-I collagen antibody were performed to examine the pattern of the expression of PCNA and type I collagen, respectively. Results : 1. The mean increment of the distance between the proximal and distal screw-holding parts of the distractor was 6.8mm. The average elongation of the mandible in the experimental side was 5.3mm. The loss of elongation was 1.5mm in average. 2. New bone was already observed at the 4th. day after the end of distraction. But, bony union was not completed in the distraction gap at the 32th. day after the end of distraction by radiographic and microscopic examinations. 3. The expression rate of PCNA positive cells in the distraction gap had a tendency of decrease from 35.1-68.8% initially, to 49.1%, and finally to 17.6-27.2%. But at the final period, the tissue of the elongated gap still had the ability of cell proliferation. On the other hand, the expression of PCNA positive cells in the control side were negligible through the experimental period. 4. PCNA positive cells were observed primarily both at the central fibrous zone and at the region of just adjacent to CFZ which initiated new bone formation. 5. The expression pattern of the type I collagen was not zone-specific. They were observed diffusely throughout the elongation gap. 6. The predominant mechanism of new bone formation in the distraction gap was intramembranous. But, some of the regenerated bone was formed by endochondral ossification.

  • PDF

성견 하악골 절단 후 기계적 골 견인에 의해 형성된 골 신장부에 대한 시기별 조직학적 변화 (HISTOLOGICAL CHANGES IN THE ELONGATED BONE AFFECTED BY OSTEODISTRACTION OF THE MANDIBLE IN THE DOG)

  • 백선호;안병근;박영주;박희건;박준우;이건주;이용찬;조병욱
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권5호
    • /
    • pp.404-416
    • /
    • 2001
  • Purpose : Traditionally, the treatement of choice has been a bone grafting procedure to increase the length of bone in case of actual length discrepancy. But, bone grafting procedure has many disadvantages, for example, graft resorption, donor site morbidity, and so on. So, many trials have been performed to avert the use of autogenous bone graft via introducing new materials or methods. And, one of those trials has been realized by the development of a technique inducing bone lengthening by osteotomy (or corticotomy) and slow gradual distraction of the osteotomized segments. This new technique of bone lengthening dates back to the early 20th century. But, the majority of information concerning the biology of new bone formation during bone lengthening and technical details of the procedure were produced by extensive clinical and experimental studies performed by Ilizarov, a Russian surgeon. According to Ilizarov, with adequate blood supply, preservation of periosteum, rigid fixation of the osteotomized segments, and proper rate and rhythm of distraction, intramembranous bone rapidly develops within the distraction gap in the limb lengthening procedure. In the limb lengthening, many orthopedic surgeons try to observe the biologic and clinical principles recommended by Ilizarov. In the oral and maxillofacial region, however, not a few studies must be performed to apply this surgical technique in the clinical cases. Besides, the mechanism of bone formation in the distraction gap is not clear, yet. The purpose of this experiment was to scrutinize serially the histological changes in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. In addition, it was performed to confirm the presence of specific region(s) which was important in the bone formation in the gap through the observation of the expression pattern of osteocalcin and osteonectin with the immunohistochemical examination. Materials and Methods : The experimental and control specimens were obtained from seven adult male mongrel dogs weighing over 20kg. The distractors were custom-made linear extraoral devices and bicortical fixation screws were 2.3mm in diameter, 50mm in total length, 15mm in screw length. The distractors were devised to produce a linear gap of 0.75mm between two bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side of each animal was corticotomized perpendicular to the occlusal plane and then two bony segments were separated completely by careful manipulation of the segments with bone forceps. The left side of each animal was left intact. This side was served as control. At sixth day after osteotomy and fixation of the segments were performed, distraction of the segments was commenced with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were euthanized at the 16th. 29th, and 44th day after the osteotomy. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with H&E. The prepared specimens were examined under the light microscope. And, immunohistochemical examinations using anti-osteocalcin antibody (OC1, Biodesign, USA) and anti-osteonectin antibody (Haematologic Technologies Inc., Essex, VT) to locate the expressions of osteocalcin and osteonectin, respectively, were performed. Results : 1. New bone was observed already at the 16th. day after osteotomy. This suggests that new bone formation in osteodistraction was commenced at an early stage of the regenerative process. But, radiologically and microscopically, bony union was not completed in the distraction gap at the 44th. day after osteotomy. Therefore, rigid fixation must be maintained between the bony fragments till the complete bony union is confirmed clinically rather than one month or so after the completion of distraction.

  • PDF