• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.88-93
• /
• 2004

The main objective of the research is to Propose an algorithm that to estimate the screwing torque from parameters of DC motor current without using any stain gage and torque cell. The auto screw drive system is divided into two parts, one is the DC motor ind the other is mechanical part in which the friction torque and damping ratio are a function of rotational of spindle electro motive force constant. The torque is estimated from the friction torque. The research is concerned with applying the method to an auto screw drive and the advantages and limitations are also discussed in this paper.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.148-169
• /
• 1994

The concept of biologic attachment of load-bearing implants has developed over the past decades as an alternative to the difficulties associated with long term implantation using mechanical fixation and bone cement. The choice of implant material is also as critical an element as site preparation or insertion procedure. The properties of implants that affect host tissue responses are not limited to chemical composition alone, but also include shape, surface characteristics, site of implantation, and mechanical interaction with host tissues. Initial mechanical interlocking prevents micromotion and may be a prerequisite for direct bone apposition. A hard tightening of screws does not necessarily mean a stronger fixation and final tightening of the fixtures is dependent on the experience of the operator. Removal torque is lower than insertion torque. The purpose of this study was to investigate differences in the removal torques at the bone-implant interface of polished and sandblasted Titanium. This experiment will give insight into important factors that must be considered when interpreting in vivo screwing forces on implants during the connection of the transmucosal abutments. We evaluated the significance of different surface textures by comparison of the withdrawal forces necessary for removal of otherwise identical rough and polished implants of Titanium and also evaluated interfacial response on the light microscopic level to implant surface. And the priority of the area of insertion on osseointegration were evaluated. 9 Titanium implants - among them, 3 were for the developmental - of either a smooth or rough surface finish were inserted in the dog mandible in the right side. 3 months later Kanon Torque Gauge was used to unscrew the implants. The results were as follows : 1. No significant difference was seen in the removal torque due to variation in surface treatment, 23 Ncm for the sandblasted and 23.33 Ncm for the polished surface (p>0.05). 2. Implants in the anterior (25 Ncm) mandible showed better resistance to unscrewing in comparison to ones in the posterior (18 Ncm) region (p<0.05). 3. Developmental fixtures (22 Ncm) had similar pullout strength to the control group (p>0.05).

• 한국항공우주학회지
• /
• 제46권12호
• /
• pp.1004-1011
• /
• 2018

최근 우수한 충격 저감 효과로 인해 파이로테크닉 분리 장치의 한 종류인 저충격 파이로 테크닉 분리 너트에 많은 관심이 주어지고 있다. 하지만 파이로테크닉 분리 너트의 경우 일반 너트 대신 분할 너트가 사용되기 때문에 볼트 풀림 거동에 대한 연구가 충분히 이루어지지 않은 측면이 있다. 이에 본 연구에서는 Junker 진동시험을 준거삼아 볼트 풀림 해석을 수행하였다. 해석은 크게 두 단계로 이루어져 있다. 첫 번째 단계는 체결토크를 이용하여 볼트를 분리너트에 체결하는 과정이고, 두 번째 단계는 횡 방향 가진을 통해 볼트가 풀리는 과정이다. 이러한 과정을 통해 볼트 풀림 거동을 얻을 수 있었다. 또한 신뢰성 있는 파이로테크닉 분리 너트의 설계를 위해 체결부 틈새가 볼트 풀림 거동에 미치는 영향을 고찰하였다.