• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.131-135
• /
• 2002

This paper describes a new ultra-fast contingency screening algorithm for on-line TSA without time simulation. All machines are represented in a classical model and the stability index is defined as the ratio between acceleration power during a fault and deceleration power after clearing the fault. Critical clustering of machines is done based on the stability index, and the power-angle curve of the critical machines is drawn assuming that the angles of the critical machines increase uniformly, while those of the non-critical ones remain constant. Finally, the critical clearing time (CCT) is computed using the power-angle curve. The proposed algorithm is tested on the KEPCO system comprised of 900-bus and 230-machines. The CCT values computed with the screening algorithm are in good agreement with those computed using the detailed model and the SIME method. The computation time for screening about 270 contingencies is 17 seconds with 1.2 GHz PC.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권5호
• /
• pp.225-233
• /
• 2001

SIME(SIngle Machine Equivalent) method has been recognized as a useful tool to determine transient stability of power systems. In this paper, SIME method is used to develop the KEPCO transient stability assessment (TSA) tool. A new screening algorithm that can be implemented in SIME method is proposed. The salient feature of the proposed screening algorithm is as follows. First, critical generators are identified by a new index in the early stage of the time domain simulation. Thus, computational time required to find OMIB(One Machine Infinite Bus) can be reduced significantly. Second, clustering critical machines can be performed even in very stable cases. It enables to be avoid extra calculation of time trajectory that is needed in SIME for classifying the stable cases. Finally, using power-angle trajectory and subdividing contingency classification have improved the screening capability. This algorithm is applied to the fast TSA of the KEPCO system.

• 대한유전성대사질환학회지
• /
• 제16권2호
• /
• pp.62-69
• /
• 2016

Newborn screening of some urea cycle disorders has little benefits because of early severe symptoms before the result, low sensitivity (especially hypocitrullinemia) and poor prognosis. But in case of citrullinemia, citrin deficiency and argininosuccinic aciduria diagnosed as elevated citrulline, newborn screening is helpful for early diagnosis and treatment before the symptom. Distinction between the clinical forms of these diseases is based on clinical findings and biochemical results, however, they may not be clearcut. Treatment is different from each other, so exact diagnosis is essential. Here, the diagnostic algorithm for elevated citrulline after tandem mass screening has been proposed. Minimizing total process time from sampling to report of the results is important in Korea for diagnosis and treatment of these disorders.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.229-239
• /
• 2018

Purpose: There is a difficulty in Environmental Stress Screening (ESS) test design for weapon system's electrical/electronic components/products in small and medium-sized enterprises. To overcome this difficulty, I propose an easy ESS test design approach algorithm that is optimized with only one environment tolerance design information parameter (${\Delta}T$). Methods: To propose the mass production weapon system ESS test design for cost-effective optimization, I define an optimum cost-effective mathematical model ESS test algorithm model based on modified MIL-HDBK-344, MIL-HDBK-2164 and DTIC Technical Report 2477. Results: I clearly confirmed and obtained the quantitative data of ESS effectiveness and cost optimization along our ESS test design algorithm through the practical case. I will expect that proposed ESS test method is used for ESS process improvement activity and cost cutting of mass production weapon system manufacturing cost in small and medium-sized enterprises. Conclusion: In order to compare the effectiveness of the proposed algorithm, I compared the effectiveness of the existing ESS test and the proposed algorithm ESS test based on the existing weapon system circuit card assembly for signal processing. As a result of the comparison, it was confirmed that the test time was reduced from 573.0 minutes to 517.2minutes (9.74% less than existing test time).

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.142-149
• /
• 2022

In increasing the safety and usage of lithium-ion battery packs, reducing the parameter deviation between cells, such as voltage and temperature within the battery pack, is important. In this study, we propose a screening method to reduce parameter deviation between cells in battery packs. Screening algorithms are constructed based on Fuzzy logic and quantitatively express the similarities between battery cells. Screening is applied by utilizing series resistance components after experiments of electrical characteristics that consider the operation status of battery packs. After screening, the standard deviation of series resistance components according to the similarity ranking is compared and analyzed, and their conformity are verified with the algorithm parameters.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.185-193
• /
• 1993

In this paper, the peak detection algorithm was developed for the purpose of screening of the target compounds. Algorithm is divided into searching the characteristic ion and peak detection. The heuristic knowledge about analytical chemistry was applied for the searching the characteristic ion. Peak detection was accomplished in comparison with the peak identification strings and pattern strings around the retention time. Pattern strings are composed with the number which generated by pattern identification function. The variables of pattern identification function are the codes which represent the difference of two adjacent abundances Some of the free steroids were selected to demonstrate the proposed algorithm.

• 전력전자학회논문지
• /
• 제27권3호
• /
• pp.265-274
• /
• 2022

This paper proposes a machine learning-based screening algorithm to build the retired battery pack of the energy storage system. The proposed algorithm creates the dataset of various performance parameters of the retired battery, and this dataset is preprocessed through a principal component analysis to reduce the overfitting problem. The retried batteries with a large deviation are excluded in the dataset through a density-based spatial clustering of applications with noise, and the K-means clustering method is formulated to select the group of the retired batteries to satisfy the deviation requirement conditions. The performance of the proposed algorithm is verified based on NASA and Oxford datasets.

• 한국가스학회지
• /
• 제7권1호
• /
• pp.1-9
• /
• 2003

본 연구에서는 가스공정에서 중요시되는 화재/폭발에 대한 위험성 평가 기법으로, 공정위험 지수법인 Dow's F&EI와 정성적 위험판별기법인 장치스크리닝 기법의 특성에 산업별로 위험시되는 사항에 대한 전문가 의견을 수렴할 수 있도록 전문가 시스템-장치 및 공청의 사고사례 및 전문가의 의견 수렴된 시스템을 도입하여 위험 지수에 전문가적 reward/penalty를 주고 공정 장치의 종합위험도 지수를 계산하여 보다 정밀한 위험장치 검색을 할 수 있는 형태인 다중판별 장치스크리닝 기법(Multi-distinction Equipment Screening Algorithm, MESA)을 제안하였다. 그리고 이에 대한 사례연구로 LPG 지하저장공정의 위험도 순위에 대해 전문가 시스템이 도입되지 않은 경우와 도입된 경우의 위험판단 해상도를 파악하여 제안 알고리즘의 유용성을 입증하였다. 그리고 이와 같은 위험도 순위에 따른 장치의 물리적 특징을 파악함으로써 안전장치 및 mitigation 장치 그리고 비상대응계획에 대한 정보를 제공할 수 있으리라 기대한다.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.55-61
• /
• 2001

SIME(Single Machine Equivalent) method has been recognized as a useful tool to determine transient stability of power system. In this paper, SIME method is used to develop the KEPCO transient stability assessment (TSA) tool. A new screening algorithm that can be generators are identified by a new index in the early stage of the time domain simulation. Thus, computational time require to find OMIB(One Machine Infinite Bus) can be reduced significantly. Second, clustering critical machines can be performed even in very stable cases. It enables to be avoid extra calculation of time trajectory that is needed in SIME for classifying the stable cases. This algorithm is applied to the fast TSA of the KEPCO system in the year of 2010.