• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.58-65
• /
• 2001

This paper describes a new watermarking attach algorithm, a screen mark attack. The screen mark attack is a modified overmarking attach, which attacks a watermarking system by Inserting another watermark into a marked Image. Overmarking attack has a problem that it cannot be applied to a public watermarking software that prohibits the watermark embedder from embedding another watermark Into an already marked image. However, the proposed attack algorithm can be applied to such a pub1ic watermarking scheme. Test results show that the proposed watermarking attack algorithm is successful for commercial watermarking softwares and attacked images show better quality than Images attached by 07her attack tools.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.217-223
• /
• 2016

In this research, a continuous roll-to-roll screen printing system was developed using a flat screen. It has a newly devised sliding mechanism of screen printing module, which can be controlled accurately in sync with a moving web, driven by a roll-to-roll tension control and web-guiding system. In addition, the real-time precision alignment module that consists of a vision camera and an $X-Y-{\theta}$ alignment stage was implemented. With this developed system, the feasibility of continuous printing with minimum pattern width below $60{\mu}m$ was verified, and an overlay of ${\pm}60{\mu}m$ between the laser-patterned reference mark and the printed mark on a 300-mm-wide film was achieved.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.96-104
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The centers of fiducial marks are obtained by using moment, gradient method. The first method is calculating the centroid by using first moment of blob, and the latter method is calculating the center of the circle whose equation is obtained by curve-fitting the boundaries of fiducial mark. The operating system used to implement the whole set-up is carried in Window 98 (or NT) environment. Finally we implemented this system to PCB screen printer.

• The monthly packaging world
• /
• s.124
• /
• pp.194-195
• /
• 2003

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.17-22
• /
• 2003

A kind of image analysis system is used to investigate the structural features of the papers made from Indian mallow. The screen mark on the paper was identified and analyzed. The dusts, shives and fiber bundles were manifested and calculated. In the aspect of Indian mallow hanji's surface characteristics analyzed by an Image analyzer, the average of gray level and its standard deviation hanji from the woody core were rather lower than of bast fiber pulp because of better sheet formation of the formers. Hower. high brightness hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.42-48
• /
• 1994

This paper presents the navigation method for a mobile robot which uses a single camera and fluorescent lamp as a guide mark, projected on a convex mirror. The current position and heading direction of the mobile robot are obtained from the image of the guide mark. While the mobile robot travels to a goal position, the current position and heading direction of the mobile robot are updated continuously and the desired path and actual moving path are displayed on the monitor screen in real time. This proposed method eliminates the need to rotate the camera to track the guide mark, since a panoramic view of the surrounding area is available from the convex mirror, and natural guide marks such as usual florescent lamp on the ceiling or door frame can be used for navigation.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1987

Following results about Y, M, C mask are obtained by the Indirect-Screen Color Separation Method. We mark use of experimental system which are in use for the student education. In the All-Projection Method of transparency Copy, the results are summerized as follows; (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.88-95
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand fur high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The geometrical relationship between PCB, cameras, and xy$\theta$ stage is derived, and analytical equations for alignment errors are also obtained. The unknown parameters including camera declining angles and etc. can be obtained by initialization process. Finally, the proposed algorithm is verified by experiments by using test bench.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.20-25
• /
• 2001

In recent years, the concern about a user center design in increasing, and it's needed to task a user's visual cognitive characteristics for information presentation. Then this study aims to grasp user's cognitive characteristics about the information presentation by analyzing the fixation points. In the experiment, actually subject operated a copy machine. Recorded the fixation point movement of the operation panel by the eye mark recorder. Analysis examined the screen interface of the operation panel from the field of a fixation point trace. The top down type fixation oder by experience or the context became clear as a result. Furthermore, the difference of the fixation order by skill level was also examined. In this study, it was assumed that to grasp the visual cognitive characteristics becomes the key of efficient information.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.2
• /
• pp.165-177
• /
• 1996

This paper presents a navigation method for a mobile robot which can follow a path drawn on a monitor screen. The current position and heading direction of the mobile robot are obtained using a single camera from a single image of the guide mark projected on a convex mirror. This proposed method eliminates the need to rotate or tilt the camera to track the guide mark, because the convex mirror and a stationary camera provide a panoramic view of the surrounding area. As guide marks, fluorescent lamps on the ceiling, door frames, or any other natural line segment can be used without adding any artificial elements to them.