• The Korean Journal of Mycology
• /
• v.14 no.4
• /
• pp.265-271
• /
• 1986

To screen biologically active components of the higher fungi of Korea, the dried carpophores of Auricularia polytricha were extracted with water. The extract was examined for acute toxicity in ICR mice. A low molecular weight toxin of this fungus was purified by a acetone precipitation followed by cellulose, silica gel and Sephadex LH-20 column chromatography. Major symptoms of this toxin were decreasing of normal motility, eye extrusion, hair erection, shivering, trembling of head, paralysis, rapid running or moving before death and depression of respiration. The median lethal doses of the total extract were 1. 28 g/kg and 4. 31 g/kg by i.p. and p.o. administrations, respectively. The amounts of one mouse lethal unit of the total extract and final fraction that killed a 20 g mouse within 30 minutes were 28.5 and 12.0 mg/mouse, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1032-1038
• /
• 2003

The two-level full factorial and mixture design were used to screen ingredient type and to investigate the effects of ingredients on properties of surimi gel from jack mackerel using measurements of breaking forces, deformation values and color. The addition of starch decreased breaking force significantly (p<0.05), but did not affect deformation. The bovine plasma protein (BPP) among non-muscle proteins increased a breaking force and deformation value. However, the dried egg white increased slightly a breaking force, and decreased greatly a deformation value. The breaking force of gel was increased, but deformation value did not change significantly (p<0.05) with adding BPP. The whiteness of gel was slightly improved with the addition of corn starch and BPP. At 78% moisture, the optimum ratios of ingredients were 89.5∼90.0% for alkali surimi, 4.6∼6.0% for corn starch and 4.3∼5.4% for BPP to obtain above 110g for a breaking force, 4.2 mm for a deformation, and 22.5 for a whiteness.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.79-88
• /
• 2007

As the mobile computers such as Personal Digital Assistants (PDAs) or Smart Phone has been widespread in our daily life, the demand of an extensive data input will gradually be increased. Consequently, many alternative soft keyboards have been proposed to satisfy this requirement. However none of them can provide an absolute solutions for that, the segregated guideline for keyboard arrangement and usage still cause much confusion to the user. Therefore, an integrated guideline is seriously required. In order to come up with the integrated guideline for Korean Soft keyboard GUI, the questionnaire and the experimental test compared with five soft keyboards were conducted in this study. As a result this paper presents five guidelines for improving an input speed of soft keyboard on the mobile computing; following familiarity for effective screen use, using a single key rather than grouping key, considering position of prediction word, considering prompt feedback, finally, considering optimized keyboard size.

• Journal of Trauma and Injury
• /
• v.22 no.2
• /
• pp.233-241
• /
• 2009

Purpose: Alcohol is a major risk factor for injuries, but little is known about the relationship between chronic drinking pattern and injuries. The purpose of this study was to evaluate the incidence of alcohol-related injuries and the differences in the characteristics of the injuries between Alcohol Use Disorder Identification Test (AUDIT) categories. Methods: Among a representative sample of the third Korea National Health and Nutrition Examination Survey. 7,697 adults answered questions about injuries, drinking patterns, and socioeconomic status. Incidences of alcohol-related injuries and of non-alcohol-related injuries were calculated, and the relative ratio of injuries between AUDIT categories was analyzed. Results: The incidences of all injuries and alcohol-related injuries were 69.2 and 6.8 per 1000 person-year. After adjustment, the incidences of non-alcohol-related injuries showed no differences between AUDIT categories. But the adjusted relative ratios (RRs) of alcohol-related injuries were 3.73 (95% CI: 1.54~8.99) and 7.70 (95% CI: 3.61~16.44) for risk drinkers and for alcohol-dependent drinkers respectively. No specific body part could be identified as being frequently injured in cases of risk drinkers and alcohol-dependent drinkers. In contrast, the adjusted RRs of fractures, bruises, and open wounds were 1.76 (95% CI: 1.03~3.02), 1.73 (95% CI: 1.15~2.61), and 1.85 (95% CI: 1.17~2.93) for alcohol-dependent drinkers. Assaults occurred 4.66 times more frequently in alcohol-dependent drinkers. Conclusion: Alcohol-related injuries occur more frequently as the person becomes more dependent on alcohol. Fractures, Bruises, open wounds, and assaults occur more frequently in alcohol-dependent drinker. This study suggests that efforts should be carried out in the ED to screen and treat alcohol-use disorders associated with patients injured after drinking.

• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.258-267
• /
• 1973

Chemical analysis and enzymatic hydrolysis of certain Korean acorns were performed in order to make use of the local acorns. Exclusion of tannin from acorns is aided in the processing. Studies of these were undertaken and the results obtained are summarized as follows; 1. Several Korean acorns were used to analyze their proximate composition, tannin and major inorganic principles. The content of acorn tannin was found to be 6.5 to 7.5%. 2. An Attempt was made to screen suitable strains in order to make acorn-tannin-hydrolyzing enzyme accumulated in the culture broth, and Aspergillus flavus and Asp. sp. AN-11, which showed in their culture broths, were obtained from the contaminated acorns. 3. Cultural measures for the strains of Aspergillus flavus and Asp. sp. AN-11 for an improved tannase production and optimal conditions were determined.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.79-85
• /
• 2006

CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structural materials for vehicle, has a wide application in light-weigh structural materials of airplanes, ships and automobiles because of high strength and stiffness, However, there is a design variable to be considered in practical application of the laminate composite materials, these materials are vulnerable to transverse impact. This paper is to study the effects of stacking sequence and curvature on the penetration characteristics of composite laminate shell. They are stacked to $[0_3/90_3]S,\;[90_3/0_3]s\;and\;[0_2/90_3/0]s,\;[90_2/0_3/90]s$ and their interlaminar number two and four. They are manufactured to various curvature radius (R=100, 150, 200mm and $\infty$), When the specimen is subjected to transverse impact by a steel ball, the velocity of the steel ball was measured both before and after impact by determing the time for it to pass two ballistics-screen sensors located a known distance apart. The critical penetration energy of specimen A and B with less interfaces were a little higher than those of C and D. As the curvature increases, the critical penetration energy increases linearly because the resistance to the in-plane deformation as well as bending deformation increases, which need higher critical penetration energy. The specimen A and C have higher critical penetration energy than B and D because of different stacking sequences. We examined crack length through a penetration test. For the specimen A with 2interfaces, the longest circumferential direction crack length were observed on the first interface from the impact point. For the specimen B 4-interface, the longest circumferential direction crack length were observed on the second interface from the impact point.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.85-95
• /
• 1995

Radiation measuring system using wireless communication method with single channel has been diveloped and tested. In this system, radiation signals from GM tube are transformed into digital pulses in pulse processing circuit and modulated in FSK (frequency shift keying) circuit for digital communication and then wirelessly transmitted to a receiving unit. The digital pulses received are then demodulated in FSK circuit and converted into radiation dose/dose rate in the data acquisition unit to display on the screen of a personal computer. The performance of this system was evaluated by using both a pulse generator and a standard radiation source(Cs-137). In both cases, digital pulses with 5V were observed in pulse processing circuit without distortion of their shape through wireless communication system. The experimental results of radiation measurement by this system after several test-irradiation of GM detector to a standard radiation source(Cs-137), showed good agreement with irradiation dose rate within 10% difference, and proved that this system could be effectively utillized as radiation measuring instrument. It is expected that this wireless radiation measuring system developed for the first time in Korea, can be used as a radiation monitor as well as a personal dosimeter if we can further improve this system to adopt wireless multichannel communication system.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3333-3340
• /
• 2010

A three dimensional pharmacophore model was generated for the molecules which are responsible for anti-inflammatory activities targeting Interleukin-2 inducible tyrosine kinase (Itk). 16 structurally diverse molecules were selected as training set to generate the hypotheses using Discovery Studio v2.1. The best hypothesis, Hypo1, comprises two hydrogen bond acceptor (HBA), one hydrophobic aromatic (HA), one ring aromatic (RA) and shows high cost difference (63.71), high correlation coefficient (0.97) as well as low RMS deviation (0.81). Hypo1 has been further validated toward a test set, decoy set and Fischer's randomization method. Furthermore, Hypo1 was used to screen NCI and Maybridge databases. Finally, 2 hit molecules were identified as potential leads against Itk, which may be useful for future drug development.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3025-3029
• /
• 2014

To realize copper-based electrode materials for printed electronics applications, it is necessary to improve the adhesion strength between conductive lines and the substrate. Here, we report the preparation of Cu pastes using (3-glycidoxypropyl) trimethoxysilane (GPTMS) prepolymer as an adhesion promoter (AP). The Cu pastes were screen-printed on glass and polyimide (PI) substrates and sintered at high temperatures (> $250^{\circ}C$) under a formic acid/$N_2$ environment. According to the adhesion strengths and electrical conductivities of the sintered Cu films, the optimized Cu paste was composed of 1.0 wt % GPTMS prepolymer, 83.6 wt % Cu powder and 15.4 wt % vehicle. After sintering at $400^{\circ}C$ on a glass substrate and $275^{\circ}C$ on a PI substrate, the Cu films showed the sheet resistances of $10.0m{\Omega}/sq$. and $5.2m{\Omega}/sq$., respectively. Furthermore, the sintered Cu films exhibit excellent adhesion properties according to the results of the ASTM-D3359 standard test.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.546-549
• /
• 2011

Nano-sized $SnO_2$ thick films were prepared by a screen-printing method onto $Al_2O_3$ substrates. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box as a function of the detection gas. The nano-sized $SnO_2$ thick film sensors were treated in a $N_2$ atmosphere. The structural properties of the nano $SnO_2$with a rutile structure according to XRD showed a (110) dominant $SnO_2$ peak. The particle size of $SnO_2$:Ni nano powders at Ni 8 wt% was about 45 nm, and the $SnO_2$ particles were found to contain many pores according to the SEM analysis. The sensitivity of the nano $SnO_2$-based sensors was measured for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in the target gases. The results showed that the best sensitivity of $SnO_2$:Ni and $SnO_2$:Co sensors for $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature was observed in $SnO_2$:Ni sensors doped with 8 wt% Ni. The response time of the $SnO_2$:Ni gas sensors was 10 seconds and recovery time was 15 seconds for the $CH_4$ and $CH_3CH_2CH_3$ gases.