• 한국통신학회논문지
• /
• 제17권10호
• /
• pp.1063-1073
• /
• 1992

본(本) 논문(論文)은 기존의 디지털 오디오 재생장치(再生裝置)로부터 화면처리용(畵面處理用) 신호(信號)를 추출(抽出)할 수 있는 방법을 제안(提案)하고 이들 억제신호(抑制信號)의 효율적(效率的)인 추출(抽出)을 위한 억제회로(抑制回路)를 설계(設計)하였다. 이 회로(回路)는 상용(常用) 프로세서의 주변(周邊) 논리소자(論理素子)로 구성할 수 있도록 설계(設計)하여 범용화(汎用化) 하였고, 주(主) 프로세서 및 그래픽 억제기(抑制機)와 총합구성(總合構成)하여 CD-G 시스템에서 요구되는 3개 독립적(獨立的) 기능인 신호추출(信號抽出), 추출(抽出)된 신호(信號)의 끼워 맞추기, 추출(抽出)된 신호(信號)로부터 억제명령(抑制命令)을 분석(分析)하여 이에 따른 화면표시(畵面表示) 상태를 측정(測定)한 결과 각 기능(機能)이 실시간(實時間)으로 수행(修行)됨을 확인(確認)하였다.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.852-857
• /
• 2011

조선업종은 숙련공의 감소와 노동력 부족을 해결하기 위해 자동화와 기계화가 필요하다. 특히 조선용 핸드레일 제조공정은 표준화된 타 분야와 달리 자동화가 낙후되어 있다. 본 연구에서는 조선용 핸드레일 제작에 사용할 수 있는 철의장 가공자동화시스템을 설계하고 개발하였다. 시스템의 기구부는 절단공정의 효율성, 생산성, 안정성 등을 고려하여 설계하였고, CATIA 와 ANSYS를 사용하여 구조물의 안정성을 확인하였다. 시스템 제어부는 개방성과 확장성을 제공하는 PCNC 콘트롤러를 사용하였고, 터치스크린 방식의 화면 조작을 통해 시스템의 제어 및 모니터링을 할 수 있도록 구축하였다. 개발된 철의장 가공자동화시스템은 수차의 구동테스트 및 가공테스트를 통해 성능의 우수성을 입증하여 실용단계에 있다.

• 한국환경복원기술학회지
• /
• 제11권1호
• /
• pp.39-51
• /
• 2008

These days, one of the issues well discussed is the obstruction or screen of sight to mountain-skyline by buildings. So question is to which heights buildings should be constructed over mountain-skyline and then harmony can be realized between mountain-skyline and building-outline. Based on the mentioned above, this study intends to find out the proper projection- level of buildings over background mountain-skyline when considering the types of mountain-skyline, building-outline and building-layout. The results of this study are first, the proper projection-ratio of buildings over background mountain-skyline can be 0.1 because assessment values on harmony-level are more than 3.0 in almost cases, second, the building-outline influences on the assessment values of harmony-level when the types of mountain-skyline are formed left-high & right-low and right-high & left-low, third, building-layout doesn't influence on the assessment va lues of harmony-level, finally, statistically difference doesn't exist between expert group and non-expert group in the assessment values of harmony-level.

• 스마트미디어저널
• /
• 제5권3호
• /
• pp.49-53
• /
• 2016

인체 전자기장 신호를 검출하여 동작 인식에 이용하는 비접촉방식의 방법은 시간과 공간의 제약이 기존의 시스템보다 덜하므로 관련 연구들이 진행 중에 있다. 본 논문에서는 비접촉방식의 인체전기장 신호를 검출할 수 있는 하드웨어를 구현하여 이를 디지털 파형화 하여 인식률을 높일 수 있는 회로시스템을 설계하였다. 차동 증폭회로의 구현과 비교기를 연동한 디지털 파형화를 위한 회로 시스템을 시뮬레이션과 결합하여 PCB화한 후/ 설계된 전체 회로 시스템에 대한 특성평가를 수행하였다.

• 산업공학
• /
• 제11권2호
• /
• pp.211-225
• /
• 1998

As mentioned in Part I all groupware products have been categorized into three areas which include cooperation/document management systems(CMS), collaborative writing systems(CWS), and decision-making/meeting system(DMS). This study deals with a comparative analysis of the last two areas, which is added to the first. It turns out that DMS has a higher market share than CWS. However. since effective collaboration requires the functions inherent to these two systems. they should be integrated somehow. The systems' functions that have been implemented in response to design issues have been described. Each group of the functions has been divided into three parts which consist of basic function, quasi-basic function. and others. Such a decision has been made according to the frequency rate of the functions provided in the products. While the basic functions in CWS include collaboraive writing beyond restriction of time and place, group awareness. version control. and others, in DMS realtime collaboration. brainstorming. presentation. various task support. policy formation. document management, multimedia, subgroup communication. topic commenter, categorizer, screen capture and various rile transfer. The basic functions are merged into the integrated functional model which was proposed in Part I. Since the model is so flexible that it can partially include the quasi-functions in addition to the hasic functions. a large number of products may stem from the modification of the functional model.

• 융합신호처리학회논문지
• /
• 제15권3호
• /
• pp.97-103
• /
• 2014

근래에 와서 출입문의 물리적 보안장치로써 디지털 도어록의 사용이 보편화되었다. 기존의 자물쇠 방식 보다는 훨씬 편리한 기능이지만 도어록에 전기 충격을 가할 경우 열리는 문제점이 노출되었다. 본 연구에서는 도어록 기기를 안으로 숨기고 증강현실을 이용해 도어록을 사용자의 스마트폰 화면에 띄우게 하여 보안성을 높이는 방법을 제안한다. 아울러 메모노트를 띄우는 기능을 추가하여 가족 간의 의사소통을 원활하게 해주는 기능을 부가하였다. 본 연구 결과는 가상으로 만든 출입문과 아두이노와 와이파이 쉴드 그리고 자물쇠를 제어하기 위한 모터를 사용하여 구현하였으며, 만족할 만한 실험결과를 보였다.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1645-1650
• /
• 2015

This paper presents the 3-dimensional electromagnetic field analysis method and correction of sensor distortion that is used by a motor speed sensor. The magnetic sensors are being expanded due to lower price than the other speed sensors such as resolver and encoder. Magnetic sensor generates sine and cosine waves when the motor rotates. However, the sine and cosine signals are distorted due to magnetic noise, which makes the angle error of the sensor, generated near by the Hall element. This paper defines an optimal design variables by using the Taguchi method to minimize output distortion of the magnetic sensor and permanent magnet. To enhance reliability of the magnetic position sensor from sensitivity error, assembly amplitude mismatch and the electrical angle, 3-Dimensional electromagnetic finite element method and correction algorithm errors were performed in due of the magnetic sensor in order to improve the quality of the initial production model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.844-847
• /
• 2003

Display devices are becoming increasingly important as an interface between humans and machines in the growing information society. In display devices, PDP (Plasma Display Panel) has many advantages in that it has wide screen, wide viewing angle and is light weight, thin. In PDP driving method, if the brightness of input image is high, applying the fixed sustain pulse to the PDP panel will raise the PDP power consumption and may damages the PDP panel. To overcome these problems, the Plasma AI driving method was introduced by the Matshushita co. in Japan. The Plasma AI driving module calculates the peak value and average value of 1 frame image and adjusts the gradation and sustain pulses for 1 frame sustain. In this paper, the proposed PDP driving module is based on the Plasma AI driving module. The proposed driving module calculates peak value and average value, and the brightness distribution of 1 frame image. Using brightness distribution, the proposed driving module divides 1 frame input image into 15 image patterns. For each image pattern, minimum sustain pulses and sub-frames are used for the brightness of 1 frame image and the sustain weight for 64, 128, 192 gradation is proposed. Therefore, the sustain power consumption can be reduced.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2197-2204
• /
• 2005

The combination of Gas chromatography (GC) for separation and Flame Ionization Detection (FID) for detection and identification of the components of a mixture of compounds is a fast and strongly proved method of analytic chemistry. The objective of this research was to design a combined High-speed miniature screening Gas chromatograph along with a Flame Ionization Detector for quick, quantitative and qualitative analysis of gas components. This combined GC-FID system is suitable to detect the volatile and semi-volatile hydrocarbons present in a gas mixture. The construction made it less expensive, easy to use and movable. The complete gas path was developed. On/off valves, temperature and flow sensors and their interface electronics were used for controlling purpose. A Microcontroller was programmed to measure the temperature and gas flow using the sensors and to control and regulate them using the electronics and valves. A pocket PC with its touch screen served as a user interface for the system. Software was developed for the pocket PC, which makes the communication possible with the Microcontroller. The system parameters can be indicated in the Pocket PC as simple text and also the analysis result can be displayed.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1479-1486
• /
• 2016

According to the advancement of display devices, the multi-screen contents display environment is growing to be accepted for the display exhibition area. The objectives of this research are to find communications technology and to design an editor interface of contents delivery system for the larger and adaptive multi-display workspaces. The proposed system can find existence of display devices and get information without any additional tools like marker, and can recognize device layout with only web-cam and image processing technology. The multi-display contents delivery system is composed of devices with three roles; display device, editor device, and fixed server. The editor device which has the role of main control uses UPnP technology to find existence and receive information of display devices. extract appointed color in captured picture using a tracking library to recognize the physical layout of display devices. After the device information and physical layout of display devices are connected, the content delivery system allows the display contents to be sent to the corresponding display devices through WebSocket technology. Also the experimental results show the possibility of our device connection and layout recognition techniques can be utilized for the large spaced and adaptive multi-display applications.