• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.731-736
• /
• 2011

In this study, the safety of the driving gear reducer of ESW traveling sea water screen was evaluated through seismic analysis. Mode analysis of gear reducer was performed for reliability of analysis. Seismic analysis was performed in Operating Basis Earthquake(OBE) and Safe Shutdown Earthquake(SSE), which was applied as design condition using Floor Respnse Spectrum(FRS). The maxsimum displacement of gear reducer under OBE and SSE were 0.0137 mm and 0.0241 mm, respectively. The maximum stress of gear reducer under OBE and SSE were 2.42 MPa and 4.36 MPa, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.11
• /
• pp.880-889
• /
• 2002

The purpose of the present study is to examine the factors affecting the heat transfer limitations of screen mesh heat pipe for electronic cooling by theoretical analysis. Diameter of pipe was 6 mm, and mesh numbers are 50, 100, 150, 200 and 250 and water was selected as a working fluid. According to the change of mesh number, wick layer, inclination and saturation temperature, capillary pressure, pumping pressure, liquid friction coefficient in wick, vapor friction coefficient, capillary limitation, entrainment limitation, sonic limitation and boiling limitation we analyzed by theoretical design method of a heat pipe. As some results, the capillary limitation in small diameter of heat pipe is largely affected by mesh number and wick layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1379-1382
• /
• 2009

The 3D display has been used in optical projection technology to connect twenty mini- projectors with seamless image tiling. In this way, we can improve the projected resolution by reducing each project screen and increase projected area by connect several mini-projectors. In this article, the illumination system uses the LED light source, non- telecentric structure and LCOS panel, and it's total length is less than 10 centimeter. It can build a seamless large display by tiling multiple projectors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.968-974
• /
• 2017

In this paper, modeling of brushless DC motor (BLDC) driving system for platform screen door control applied fuel cell power generation system has been proposed. At first the system configuration and operational principle of the developed fuel cell simulator has been investigated and the design of BLDC motor driving system is studied and the overall performance and dynamics of the proposed system could be effectively examined by simulation. PSIM simulation program is implemented to verify the performance and compatibility of the fuel cell power generation system and BLDC motor control system modeling.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.1-6
• /
• 2008

LCD multimedia system is necessary to display and transfer the effective image informations. However, this system uses several LCD screens, so the problem of gap between the LCD screens occurs. In order to solve this problem, this paper presents a method of using binary Fresnel lens. This kind of binary fresnel lens makes each screen enlarge and minimize the gap. The optimization of design parameters of binary Fresnel lens is presented.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.886-888
• /
• 2014

텍스트(Text)와 이미지(Image)만을 지원하던 EPUB2.0에서 오디오(Audio), 비디오(Video), 벡터 그래픽(SVG), 벡터 수학식(MathML), 다중 CSS3, 무제한 글꼴 내장, 세로쓰기, 자바 스크립트(Java Script) 등의 멀티미디어(Multimedia) 기능을 지원하는 EPUB3.0이 발표되면서 전자책의 시장이 더욱 발전하고 있다. 본 연구는 이러한 최근 동향에 따라 EPUB3.0 기반의 전자책 리더를 EPUB File Controller, EPUB File Analyzer, File Analyzer, EPUB Viewer로 분류하여 설계하고 다양한 콘텐츠를 N-Screen에서 사용할 수 있도록 구현하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.183-186
• /
• 2007

In this paper, we present a new game interface design for First Person Shooters (FPS). Previously, FPSs on computer are commonly played using keyboard/mouse or joystick along with PC display. We improve the communication environment between player and game world by means of new control system including large screen, laser gun, and directional device, which create a real life-like space for players. Because traditional display for FPS uses CRT, it cannot support large screen display due to limitation of CRT technology. We designed and implemented a new input device using laser recognizable display. We implemented a new FPS based on Quake III that is in accordance with the new devices. Results suggest that the combined interface creates a method which helps beginners to enjoy playing a FPS immediately and gives experienced players a new gaming experience.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.35-41
• /
• 2012

To control screen door installed in the subway platform, geared BLDC motors have been being used. However, because of the geared mechanisms, the control profile of the screen door in slow speed is very poor. Moreover, geared mechanism tends to leads system malfunctions and low efficiency. To overcome those problems, in this paper, the techniques of developing hi-efficiency direct drive gearless PMAC motor controller and application example to control the screen door of subway platforms are proposed. The developed system has advantages that; the energy efficiency has been increased by adopting gearless PMAC motor; the system break-down factor has been decreased due to the actuator mechanism has been simplified. In this paper, the screen door control system structure, PMAC motor drive circuit design, implementations of vector control algorithm, and test results are shown.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.157-167
• /
• 2023

As a new trend in the development of urban public spaces, the use of right-angle LED screens perfectly combines building facades with naked-eye 3D visual effects, providing designers with a brand-new creative platform. How to create a realistic naked-eye 3D effect on a right-angle LED screen and bring an immersive visual experience to the audience has become a question worth exploring. So far, production companies have yet to announce the relevant design ideas and complete production methods. In order to explore the production principle and production process of the naked-eye 3D effect of the right-angle LED screen, we summarize the basic production principle of the naked-eye 3D impact of the right-angle LED screen through case analysis. Based on understanding the production principle, the actual case production test was carried out, and a complete production process of the naked eye 3D visual effect of the right-angle led screen was tried to be provided by off-line rendering. For the problem of how to deal with image deformation, we provide two production methods: post-production software correction and UV mapping. Among them, the UV mapping method is more efficient and convenient. Referring to this paper can help designers quickly understand the production principle of the naked eye 3D effect of right-angle LED screens. The production process proposed in this paper can provide a reference for production method for related project producers.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.259-267
• /
• 2017

Furniture should change according to space. Therefore, it is important that the flexibility of the furniture, the functional efficiency, the economical efficiency and the convenience of the furniture of today. These characteristics are also important for seminar tables that are used temporarily by a large number of people. The seminar furniture currently in use has no shielding plate, there are two forms of table and shielding plate folding table. Therefore, in this research, furniture design and product development that can complement the shortcomings of the seminar furniture currently in use were done. Analysis of problems through overseas investigation and domestic market research, design planning and design, and prototyping. We have sought to optimize the volume by applying the characteristics of RTA furniture to develop a lightweight, lightweight, lightweight, easy to install and easy to use shielding plate, and open and closed system. Basically developed two types of shielding board seminar table basic shape and Roll Screen type, we expanded the scope of application such as each color and pattern. In order to reduce the weight, we replaced the parts such as anchor bolts and hinges and the shielding plate with Roll Screen and pursued volume optimization. As a result of this research, it is expected that the system of mechanisms such as packaging standardization and damage prevention for weight reduction and volume optimization will contribute to building competitiveness by domestic office prefabricated furniture industry's original technology.