• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.209-215
• /
• 1991

The effect of agitation on the dispersion of organic phase was investigated in an immiscible liquid system (n-hexane/40 wt % p-TSA aqueous solution). Four different types of six-bladed turbine impellers were used : a flat blade type and three screen blade types. The experimental results showed that the extent of dispersion of organic phase at the same agitation speed was decreased in the order of flat blade, 60 mesh, 40 mesh, and 20 mesh screen blades. Otherwise, it was increased with increasing the concentration of TBA as a surfactant agent and with decreasing volume fraction of organic phase. Also, the minimum agitation speed for a complete dispersion was increased in the order of flat blade, 60 mesh, 40 mesh, and 20 mesh screen blades. However, the minimum power consumption did not vary significantly. In this condition, the relationship between Power number and Reynolds number was expressed as $N_p=a\;N_{Re}{^b}$, where the values of constant a and constant b were ranged 2200~4100 and -0.69~-0.63 respectively.

• Journal of Pharmacopuncture
• /
• v.8 no.1
• /
• pp.31-40
• /
• 2005

Objectives : It has long been known about the osteogenic effect of CTF-HAS on bone tissues. However, it has not been determined the effect of CTF-HAS on cancer cells. The purpose of this study is to screen the CTF-HAS mediated differentially expressed genes in cancer cells such as SNU484 gastric cancer cell lines. Oligonucleotide microarray approach were employed to screen the differential expression genes. Methods : CTF-HAS was prepared by boiling and stored at $-70^{\circ}C$ until use. Cells were treated with various concentrations of CTF-HAS(0.1, 0.5, 1.5, 10, 20mg/ml) for 24 h. Cytotoxicity was tested by MTT assay. To screen the differentially expressed genes in cancer cells, cells were treated with 1.5mg/ml of CTF-HAS. For oligonucleotide microarry assay, total RNA was used for gene expression analysis using oligonucleotide genechip (Human genome U133 Plus 2.0., Affimatrix Co.). Results : It has no cytotoxic effects on HepG2 cells in all concentration (0.1, 0.5, 1.5, 10,20mg/ml). More than twofold up-regulated genes were 5 genes. The number of more than twofold down-regulated genes was 10. Discussion : This study showed the screening of CTF-HAS mediated differentially regulated genes using combined approaches of oligonucleotide microarray. The screened genes will be used for the better understanding in therapeutic effect of CTF-HAS on cancer field.

• Environmental Mutagens and Carcinogens
• /
• v.22 no.4
• /
• pp.259-265
• /
• 2002

Phthalate analogues are a plasticizer and solvent used in industry. Phthalates were reported to be a potential carcinogen classified in the category of suspected endocrine disruptors. Most common human exposure to these compounds may occur with contaminated food. They may migrate into food from plastic wrap or may enter food from general environmental contamination. Since these substances are not limited to the original products, and enter the environment, they have become widespread environmental pollutants, thus leading to a variety of phthalates that possibly threaten the public health. Concern about their use has been mounting. To screen and elucidate the endocrine disrupting activity and their mechanism of phthalate analogues, first of all, E-screen assay was performed in MCF7 human breast cancer cells with seven phthalate analogues. In this cell proliferation assay, only dibutyl phthalate (DBP) showed weak estrogenic activity. Also the yeast-based transcription assay to assess the interactions of DBP with the estrogen, androgen, and progesterone receptors was conducted. DBP in the concentration ranges from 10$^{-16}$ to 10$^{-11}$ M was active in the estrogen transcriptional assay, but it did not show the effect on $\beta$-galactosidase activity in the progesterone and androgen transcriptional assays. These data indicate that DBP shows estrogenic potential and can be classified as weak and/or suspected endocrine disrupting chemicals.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.737-741
• /
• 2019

A low-cost and flexible potassium ion (K⁺) sensor was fabricated through a screen-printed process. Uniform and conformal coating of conductive inks was verified by scanning electron microscopy and optical microscopy measurements. The K⁺-sensors showed a high sensitivity, fast response time, and low detection limit. The sensitivity of K⁺-sensor was similar to that of both mechanically normal and bent states. The K⁺-sensor exhibited a good reproducibility with no hysteresis effect and excellent long term stability. In addition, the K⁺-sensor showed an excellent selectivity for K⁺ concentrations in the presence of other interfering cation ions. Successful measurements of K⁺ concentrations in sports drink samples were demonstrated by comparing K⁺ concentration values from K⁺-sensor to those of using a commercial K⁺-meter.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.267-274
• /
• 2014

The purpose of this study is to identify a relationship between the time taken and the characteristics of touch key for touch-screen-based in-vehicle information system (IVIS) and to suggest a new Fitts' law formula that is added a driving speed parameter. Many studies already have shown that Fitts' law is well fitted in various devices for primary tasks, but there is no study of Fitts' law for secondary task in dual-task situation. Fitts' law may not be applied to the secondary task as it is, because the secondary task performance can be affected by the amount of attention for the primary task. To verify this, we carried out an experiment that showed whether pointing task to touch-screen-based IVIS during driving is affected by driving speeds or not. In the experiment, 30 people were volunteered for participants and the participants carried out driving task and pointing task on the screen of IVIS simultaneously. We measured the time to point a touch key on IVIS for every condition (3 driving speeds${\times}5$ touch key sizes${\times}7$ distances between steering wheel and touch key). As a result, there was an effect of driving speed on the pointing time. As we extended the index of difficulty of the conventional Fitts' law formula by incorporating driving speed, we established an extended Fitts' law formula for pointing on IVIS, which showed better accordance with dual task situation. This study can be evidence that secondary task performance is affected by degree of concentration on primary task, and the extended Fitts' law formula can be useful to design interfaces of IVIS.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.115-119
• /
• 2003

The thick film type sensor having Pt/Na Super Ionic Conductor(NASICON) solid electrolyte/Pt/$Na_2$$SO_4$/Pt catalyst system for $SO_2$gas was fabricated by screen-print method. The phase of Na Super Ionic Conductor solid electrolyte sintered at different temperature of 1050, 1150,$ 1250^{\circ}C$ and for different time of 1.5, 2.5, 3.5 hr were investigated by XRD. The Electromotive Force variation of the sensor with $SO_2$concentrations and operating temperatures were investigated. The major phase of Na Super Ionic Conductor film sintered at 115$0^{\circ}C$ for 3.5 hr was sodium zirconium silicon phosphate($Na_3$Zr$_2$$Si_2$PO$_{12}$). The Nernst's slope of Na Super Ionic Conductor sensor for $SO_2$gas with the variation of concentration from 10 to 100 ppm was 167.14 ㎷/decade at the operating temperature of $500 ^{\circ}C$. The increase of oxygen partial pressure was not affected to the variation of Nernst's slope.e.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.1
• /
• pp.38-47
• /
• 2013

$PM_{10}$ concentrations were measured at four monitoring sites at the Daechaung station of the Seoul subway. The four locations included two tunnels, a platform, and a waiting room. The outside site of the subway was also monitored for comparison purposes. In addition, the effect of the platform screen doors (PSDs) recently installed to isolate the $PM_{10}$ in a platform from a tunnel were evaluated, and a comparison between $PM_{10}$ levels during rush and non-rush hours was performed. It was observed that $PM_{10}$ levels in the tunnels were generally higher than those in the other locations. This might be associated with the generation of $PM_{10}$ within the tunnel due to the train braking and wear of the subway lines with the motion of the trains, which promotes the mixing and suspension of particulate matter. During this tunnel study, it was observed that the particle size of $PM_{10}$ ranged from 1.8 to 5.6 ${\mu}m$. It was revealed that the $PM_{10}$ levels in the tunnels were significantly increased by the PSDs, while those in the platform and waiting room decreased. As a result, in order to estimate the effect of ventilation system on $PM_{10}$ levels in the tunnels, fans with inverters were operated. It was found that the concentration of $PM_{10}$ was below 150 ${\mu}g/m^3$ when the air flow rate into a tunnel was approximately 210,000-216,000 CMH.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.155-175
• /
• 2007

As intellectual terror threats increase, we feel the limit in coping with those threats and the things we do are placing traditional X-ray machines & ETD and increasing aviation security staffs. In fact, even if air transportation system is the fast and most efficient transportation methods, it is true that there are many inconveniences to endure due to terror threats. In the name of security, even if we make a lot of efforts and time to screen both good-natured passengers, baggage, cargo and suspicious passengers, it is impossible to screen perfectly and it is not an efficient methods. Therefore, we introduce profiling system that reduce the effort to screen good-natured passengers but focus on screening dangerous passengers and baggages. Profiling system strengthens aviation security, using the concept "Selection & Concentration". Israel started to introduce manual profiling system in aviation security, which is interviewing suspicious passengers and it has been used in crime investigation since 1960. And it has been upgraded and diversified to CAPPS(Computer Assisted Passenger Screening Program) and SPOT(Screening Passenger by Observation). So, this theses is to study on the concept & kind of profiling and profiling methods adopted in airlines. Also it presents the method of introduction of profiling system in Korea and the necessity of making law on it.

• Particle and aerosol research
• /
• v.17 no.2
• /
• pp.37-42
• /
• 2021

Although the installation of droplet protection screen (DPS) is known to prevent droplet transmission, there is still a lack of knowledge in effectiveness of DPS installation to block the airborne transmission. In this study, the prevention ability of DPS against airborne transmission was evaluated according to the DPS height. When the DPS was not installed, the maximum concentration of PM1.0 at the location opposite to infected person was 35% of that at the infected person location. When the DPS was installed, the DPS effectively prevented the airborne transmission, consequently approximately 7% of generated particles were measured at the opposite location from particle generation position (infected person location). The prevention ability of DPS increased with DPS height, the maximum prevention efficiency of 95.1% was obtained when the DPS height was 900mm. Moreover, the speed of airborne transmission was delayed by installation of DPS, and the delay time increased with DPS height.