• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.144-149
• /
• 2006

In this study ice making characteristics are experimentally investigated for the ice slurry generating system which is pneumatically operated. The experimentations are conducted under the various test conditions such as chilled water inlet temperature, aqueous solution concentration, flow rate of cooling water, scraper pitch and frequency of cylinder stroke. For the above experimental conditions, ice making characteristics of the slurry ice generating system are evaluated in terms of the overall heat transfer coefficient, heat transfer rate and the amount of slurry ice generation. And the experimental results show that the heat transfer rate of the system increases as the flow rate of cooling water solution increases and the concentration of ethylene glycol and inlet temperature of chilled water decreases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1974-1979
• /
• 2007

In this study, Ice slurry generator heat transfer characteristics are experimentally investigated for the ice slurry generating system with scraper which is pneumatically operated. The ice slurry generator has the same shape as the vertical double tube type heat exchanger. Refrigerant is flowing in the outside tube and ethylene glycol solution in the inside tube. Refrigerant and solution water are parallel flow type which entering bottom of generator and leaving top of generator. The experimentations are conducted under the various test conditions such as compressor speed and cooling water temperature. For the above experimental conditions, heat transfer characteristics of the ice slurry generating system are evaluated in terms of the overall heat transfer coefficient and the heat transfer rate. And the experimental results show that the heat transfer rate of the system is increased as the compressor speed increases and the cooling water temperature decreases.

• 한국수산과학회지
• /
• 제49권2호
• /
• pp.224-233
• /
• 2016

The objective of this study was to develop an artificial neural network (ANN) model for the acoustic identification of commercially important fish species in Korea. A broadband echo acquisition and processing system operating over the frequency range of 85-225 kHz was used to collect and process species-specific, time-frequency feature images from six fish species: black rockfish Sebastes schlegeli, black scraper Thamnaconus modesutus [K], chub mackerel Scomber japonicus, goldeye rockfish Sebastes thompsoni, konoshiro gizzard shad Konosirus punctatus and large yellow croaker Larimichthys crocea. An ANN classifier was developed to identify fish species acoustically on the basis of only 100 dimension time-frequency features extracted by the principal components analysis (PCA). The overall mean identification rate for the six fish species was 88.5%, with individual identification rates of 76.6% for black rockfish, 82.8% for black scraper, 93.8% for chub mackerel, 90.6% for goldeye rockfish, 96.9% for konoshiro gizzard shad and 90.6% for large yellow croaker, respectively. These results demonstrate that individual live fish in well-controlled environments can be identified accurately by the proposed ANN model.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.1-15
• /
• 1999

The structural and environmental characteristics of typical pig houses in different growth phases were surveyed and analyzed. Based on the data for thirty six selected farms in four provinces, Gyonggi-do, Gangwon-do, Choongnam, and Chonbook, in Central Korea, the goal is to eventually establish standard pig houses of sow and litter, nursery pigs, and growing-finishing pigs. The survey included farm scale, production specialization, structural dimensions of the houses and their ventilation systems, cooling and heating systems, and floor and pit systems related to manure collection. The survey showed 90∼99% of growing-finishing curtain installation rate was lower by 10∼20%. The sidewall curtain system, although popular, is not well insulated which leads to excessive heating costs in winter. Regarding flooring and manure collection system of the house, there was quite a lot variability among provinces, with 30∼80% of the houses installing scraper systems with concrete-slat floors in comparison with 30∼60% using a slurry system. Gangwon-do and Choongbook Chungwoo-goon are the predominant regions that installed a scraper system. A general trend toward enlargement and enclosure of pig houses for all growth phases was gaining popularity in most regions in recent years. A steady shift to three site production from a lumped system was also observed to prevent a disease transfer. The structural design of a standard pig house with its environmental control systems including ventilation and heating/cooling system was suggested for further validation study. In-depth analysis of the survey data is presented in the Results and Discussing section.

• 한국축산시설환경학회지
• /
• 제14권3호
• /
• pp.183-192
• /
• 2008

본 연구는 스크레파 축사에서 톱밥을 미리 충전하고 주기적으로 돈분뇨슬러리을 투입하는 연속호기성 퇴비화 시스템 공정에서 효율적인 퇴비화 환경요인 지표의 기초자료로 활용하기 위하여 퇴비화 과정 중 온도, 수분, 수분수지 등 환경요인과 최종 퇴비의 이화학적 특성을 조사하였다. 1. 퇴비 발효기간 동안 발효층의 온도가 $50{\sim}70^{\circ}C$ 범위로서 정상적인 온도를 유지하였고, 겨울기간 동안에도 높은 온도를 유지하여 퇴비 발효가 활발하게 진행되었다. 발효조의 높이별 온도는 중간층 온도가 가장 높고 하부층 온도가 가장 낮았으며 두 층간 온도차는 $5{\sim}20^{\circ}C$를 나타내었다. 퇴비발효조의 수분함량이 50%내외일 때 발효조 온도가 $20{\sim}30^{\circ}C$로서 정상적인 발효가 일어나지 않았다. 발효조 시설물 내부의 상대습도는 최저 55%에서 최고 88% 범위에 있었다. 따라서 퇴비사의 습한 공기를 제거하기 위한 휀 장치를 설치하는 것이 필요할 것으로 사료된다. 퇴비화 기간 동안 수분수지를 분석한 결과 총 투입 수분의 90%가 증발되는 것으로 산출되었다. 2. 본 연구의 퇴비화 방식은 발효조에 수분조절제인 톱밥을 한 번 투입하고 분뇨를 연속적으로 투입하여 5월 가량 연속적으로 사용이 가능하여 톱밥 $1m^3$으로 돈분뇨슬러리 $3,13m^3$의 퇴비화 처리가 가능하였다. 3. 퇴비화 기간이 약 5개월간 발효를 거치므로 퇴비의 비료성분 함량이 높았으며 탄소함량은 34% 질소 함량은 1.62%를 나타내었고 탄질비는 21을 나타내었다.

• 생태와환경
• /
• 제37권2호통권107호
• /
• pp.137-148
• /
• 2004

Merritt-Cummins의 체계에 기초하여 한국에 정리 ${\cdot}$ 보고된 수서곤충류(10목 96과 257속)를 6개 섭식기능군 유형의 분석과 검증을 실시하였다. 총 257개 속 가운데포식자인 섭식기능군이 122개 (47%)속으로 가장 많았으며, 두 번째와 세 번째로 높은 점유율을 나타낸 섭식기능군은 gathering-collectors(33개 속, 13%)와 shredders(21개 속,8%)로 나타났다. 그 다음으로는 Scrapers가 20개 (7%) 속으로 나타났으며, filtering-collectors (12개 속,5%)와 plant-piercers(6개 속, 2%)의 순으로 나타났다. 그러나 7개 목의 총 43개 속에 해당하는 분류군은 섭식기능군이 밝혀지지 않았다. 생물군집의 안정성을 유지하는데 있어 섭식기능군의 기능을 규명하기 위하여 속 수준에서의 상대적 저항력과 회복력이 분석되었다. 그 결과 섭식기능군 gathering-collectors와 scrapers는 군집 내에서 각각 개척자와 기능적 중간자로서의 역할을 수행하고 있음이 규명되었다. 상대적 저항력과 회복력의 등급화의 실질적은 적용은 하천생태계에 대한 포괄적인 연구의 수행에 높은 응용성을 지니는 것으로 분석되었다.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.512-519
• /
• 2001

Sink roll has been used in molten Zn-0.2%Al alloy bath of continuous galvanizing line in sinking and stabilizing process of the steel strip in molten metal bath. In this process, although the scraper scraps off the sink roll surface, the dross compounds is builded up on the sink roll surface and the life time of the sink roll is shorten by the dross compounds. The present study was investigated the application of the spray coating layer on sink roll body for improving durability In molten Zn-0.2%Al alloy. Through the durability tests in molten Zn-0.2%Al alloy with various ceramic and cermet coating layer, the optimum bond and top coating material was obtained. As the results, the system of STS430F base metal, WC-l7Co bond and $ZrO_2-SiO_2$ top coating was clarified to be the best quality of durability in molten Zn-0.2%Al alloy.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.263-264
• /
• 2000

여과포 표면상에 도달하는 입자의 농토를 낮추거나 균일하게 유지시킬 경우, 부착된 입자층 두께의 성장으로 인한 압력손실의 증가율을 줄일 수 있고 이로 인하여 탈진 주기 또한 감소시킬 수 있다. 탈진조작의 저감으로 인하여 여과포의 수명 증대로 여과포의 교체 시기를 연장시킬 수 있으므로 여과포 집진장치의 운전 및 유지 보수비의 저감을 이룰 수 있다. 본 연구에서는 집진용기의 중간부분에 위치한 접선 유입관을 통하여 오염입자를 함유한 기체유동을 유입시킨 후, 원심력과 난류확산에 의하여 집진용기 내벽과 내통(inner tube) 벽면에 부착된 입자는 중력에 의하여 용기 바닥으로 모인 후 바닥면에 설치된 스크래퍼(scraper)를 통하여 분리 처리될 수 있는 새로운 형상의 집진장치를 개발하고자 하였다. (중략)

• 한국기후변화학회지
• /
• 제6권3호
• /
• pp.167-173
• /
• 2015

The purpose of study is to identify trophic pathways from organic matter to macroinvertebrates in terms of the consumer and to characterize the food webs in an intermittent stream system of the Echi River in Japan. The ${\delta}^{13}C$ values of macroinvertebrates and their potential food sources indicated the scraper (Psephenoides spp., Ecdyonurus levis) and collector-gatherer (Ephemera strigata, Paraleptonphlebia chocolata) feed on periphyton and POM (particulate organic matter) in situ. Davidius lunatus, and Hexatoma spp., which were identified as predators, may feed upon Ephemera strigata and Stenelmis larvae, respectively. At station characterized by seepage water, the ${\delta}^{15}N$ values of Ecdyonurus levis, Lymnaea auricularia, and Rhyacophila nigrocephala larva probably showed relatively lower values according to its diets. Even in homogenous species, the trophic pathways of macroinvertebrates in situ exhibited considerable variation; this reflected the trophic pathways from organic matter to the consumer depending on habitat characteristics in stream.