• 한국BIM학회 논문집
• /
• 제2권1호
• /
• pp.1-6
• /
• 2012

With the increased awareness of energy consumption as well as the environmental impact of building operations, architects, designers and planners are required to place more consideration on sustainability and energy performance of the building. To ensure most of those considerations are reflected in the building performance, critical design decisions should be made by key stakeholders early during the design development stage. The application of BIM during building energy simulations has profoundly improved the energy analysis process and thus this approach has gained momentum. However, despite rapid advances in BIM-based processes, the question still remains how ordinary building stakeholders can perform energy performance analysis, which has previously been conducted predominantly by professionals, to maximize energy efficient building performance. To address this issue, we identified two leading building performance analysis software programs, Energy Plus and IES (IES ), and compared their effectiveness and suitability as BIM-based energy simulation tools. To facilitate this study, we examined a case study on Building Performance Model (BPM) of a single story building with one door, multiple windows on each wall, a slab and a roof. We focused particularly on building energy performance by differing building orientation and window sizes and compared how effectively these two software programs analyzed the performance. We also looked at typical decision-making processes implementing building energy simulation program during the early design stages in the U.S. Finally, conclusions were drawn as to how to conduct BIM-based building energy performance evaluations more efficiently. Suggestions for further avenues of research are also made.

• 복식문화연구
• /
• 제28권4호
• /
• pp.429-445
• /
• 2020

The purpose of this study is to provide ideas for the development of bag design by analyzing the expression types and aesthetic formativeness of modern bag design using tassels and fringe given the newtro trend pursuing analog sensitivity in modern society. The methods and scope of this study are as follows. First, the related literature and internet data were reviewed in order to examine the expression types and characteristics of the bags of the West and East. Next, the definition and characteristics of tassel and fringe decoration in terms of the history of clothing were analyzed. Finally, the expression types and aesthetic formativeness of tassels and fringe were derived through the analysis of modern bag design shown in the fashion collections since 2010. The bags decorated with the tassels and fringe bring a variety of visual effects depending on the attachment position, direction and material composition, concentrating the gaze and radiating original style. In this study, the expression of tassels and fringe in modern bag design was classified into three types: surface decoration, shape variability, and object combination. Next, the aesthetic formativeness of modern bag design using tassels and fringe as decorative elements appeared through the mixture of heterogeneous materials and playfulness through imagination, exaggeration through extension of length and volume, and retro characteristics through reinterpretation of tradition. This study is expected to contribute to creative ideas of modern bag design which requires a global sense, which has been used in various cultures for a long time.

• 디자인학연구
• /
• 제13권
• /
• pp.27-42
• /
• 1996

With the rapid development of nowadays technologies, the environment of product development is experiencing structural changes than ever. Manufacturers are put under never-experienced pressures to launch their products in the market both faster and less expensively than their competitors while continuously improving product quality These pressures have given birth to so-called, Concurrent Engineering which is a systematic approach to the integrated, concurrent design of products and their related processes, including manufacture and support. Most manufactiring companies now recognize the importance of concurrent engineering and put heavy emphasis on the research and impementation of concurrent engineering. However, with this fundamental change in the process of product development, designers rarely pay attention to this newly demanding process. Designers still stay in the middle of process, satisfying their roles in dealing with aesthetic points of product. Designers badly need to incorporate the concept of concurrent engineering to design to design process and to adapt to this new environment. With these backgrounds, the study sets the objective to understand the nature of concurrent engineering and explore the possibility of it's application to industrial design. Particularly this study focuses on how the concept of concurrent engineering can be applied from the stage of form development to prototyping. At first, background, objectives, and scope of the study are discussed as an introductory part. It is followed by reviewing theories of concurrent engineering such as definition, history, technologies, examples, state of art and so on. Subsequently industrial design is viewed in terms of concurrent engineering and problems in industrial design are identified. Base on the findinss of precedent part of study, new process of industrial design incorporating concurrent engineering is developed. For the demonstration of new process, a case study of design of palm-top printer is introduced. Case study shows how the sketch, and forms can be transformed into prototyping with the simultaneous cooperation with engineering and other related specialists. Finally the study in summarized and future studies are prospected.

• 항공우주정책ㆍ법학회지
• /
• 제12권
• /
• pp.210-245
• /
• 2000

This study is to review the problem concerned with aviation safety in Korea and suggest the solution to secure the aviation safety, in respect of regulation. At first, the definition and characteristics of aviation safety are studied, and then the endeavor for the aviation safety of ICAO and FAA are reviewed. All the fields of aviation safety area are included in the scope of this study; airworthiness in aircraft production and maintenance, flight operation, airport operation and air traffic control. The level of safety can be estimated by the frequency of accidents and seriousness. The causes of air accidents can be summarized as five factors; human factor, traffic environment. aircraft, weather, and unexpected incident. The activities to protect accidents are also can be summarized as five areas; man, machine, medium, mission and management. ICAO established the standards and recommends for the aviation safety, and adopted strategic action plan for 21st century. Federal Aviation Administration of USA also contributes for the aviation safety of world wide. Nowadays, ICAO and FAA tries to coordinate each other to set up efficient and effective ways for the aviation safety. ICAO developed safety oversight manual and FAA developed model regulations, individually. However, there has been trials to merge the results of each institute's studies. The direction of this endeavor is to meet the new environment related to globalization of air transport industry. It is necessary for our government to improve the aviation safety regulation system to address the new wave of aviation safety system pursued by international organization. A systematic and comprehensive measure should be devised by cooperation of all the related field and area.

• Journal of Information Technology Applications and Management
• /
• 제19권2호
• /
• pp.59-78
• /
• 2012

The purpose of this longitudinal case study is to shed light on the reliability problems of IS performance evaluation by analyzing the discrepancy between ex ante evaluation in 2011 and ex post evaluation in 2012. Through an information system development project of a public enterprise, the gap between ex ante and ex post evaluation was ascertained and the causes as to why such gap occurs and the success factors that can solve the problems were derived. The ex ante evaluation of IS performance was performed based on both IS success model and BSC model and the ex post evaluation was carried out at the time after the target system has been built up by applying the evaluation measures and process that are similar to the ex ante evaluation. In the ex ante evaluation the business performance improved by the target system was estimated to 18.2%. On the other hand, it was seen as being low at 15.2% in the ex post evaluation and the differences were found to be statistically significant in 6 out of 10 measures. The reasons as to why such gap occurs were diagnosed as being of 2 types : (1) changes in the evaluation psychology according to the differences in the evaluation objectives; and (2) excessive expectation levels of the target system that is formed at the time of the ex ante evaluation. In other words, the users who have excessive expectations tend to overestimate in the ex ante evaluation and, in the ex post evaluation, tend to underestimate lower than the actual performance mainly due to disappointment on the results that do not meet the early expectations. As solutions to overcome the reliability problem of ex ante evaluation, 3 factors were derived : (1) the temperance of excessive expectation levels of the users; (2) a clear definition of the scope and functionality of the target system; and (3) actual commitments for the evaluations of IT performance.

• 패션비즈니스
• /
• 제7권1호
• /
• pp.152-159
• /
• 2003

The considerations on the costumes of the past, which have been conducted to the present for the purpose of creating a new design, are not just a simple imitation, but playing a role as a re-creation of fashion. A corset, one of the underwear items, has an important role to exaggerate, emphasize, or modify the beauty of a human body. It also contributes to form a beautiful silhouette of the outerwear. Specifically, the role of a corset today is more than a physical modification: making an underwear into an outerwear; using detailed decorations or materials of an underwear in the part of other garments. In doing these, decorative functions of costumes have been more and more emphasized. Therefore, a study on the composition or design of a corset would be an important study on the garment item that reflects fashions required by this age. The significance of the study is in its potential to provide reference materials needed in creating new underwear designs or the designs that can be made into outerwear products, by trying and producing a corset of the past. To make the corset, the definition of underwear and the characteristics of a corset were explored based on the review of the materials in the foreign museums, relevant photographs, and literature. The corset was made after understanding its minute details and examining its patterns. Pattern drawing was carried out using a Pattern CAD. As an intial phase of reproducing the corsets in the 17th, 18th, and 19th centuries, the scope of the present study was limited to the late Renaissance age, when corsets began to appear.

• 동의생리병리학회지
• /
• 제27권5호
• /
• pp.587-593
• /
• 2013

Exhaustion syndrome(虛勞) became broadly experienced symptoms in Korean population. In this work, we carried out a systematic literature review on exhaustion syndrome(ES) and chronic fatigue. We searched through the databases Koreanstudies Information Service System, Oriental Medicine Advanced Searching Integrated System, DataBase Periodical Information Academic for the articles published between 1994 and 2013, with the keywords 'exhaustion syndrome(虛勞)', 'consumption(虛損)', 'overexertion syndrome(勞倦)', 'fatigue', 'chronic fatigue' and 'degree of fatigue'. Among the first-run rough-searched 602 articles, we narrowed down the scope within the field of Oriental medicine (126 articles), and finally selected 28 articles appropriate to the intended research field; the selected articles were categorized by literature study(7 papers), clinical treatment (7), clinical diagnosis (5), treatment effects of herbal medicine (2), diagnosis in Sasang medicine and treatment effect of dry cupping therapy (2), and questionnaire-based diagnosis (5). We found that the overall research level on ES remained in the preliminary stages, and more efforts are needed in the field of terminology definition and standardization of diagnosis, and treatment efficacy validation beyond muscle fatigue. Finally, to develop reliable diagnostic devices on ES, we proposed a study design that included the development of objective ES diagnostic indicators and a clinical validation procedure.

• 정보처리학회논문지D
• /
• 제8D권2호
• /
• pp.181-192
• /
• 2001

XML/EDI는 데이터 전달에 초점을 둔 전통적인 EDI의 범위를 확대하여 전자상거래에 필요한 프레임워크(Framework)를 제공한다는 면에서 전통적인 EDI와 정의가 다르다. 기존의 EDI 서비스를 인터넷 플랫폼으로 옮겨가고 다시 Web 플랫폼으로 옮겨감으로써 EDI 서비스 사용자들은 기존의 서로 다른 EDI 전용 소프트웨어의 사용에 따른 불편함이 없어지고 통합된 환경으로 EDI 서비스를 사용할 수 있다. 본 논문에서는 이러한 전자상거래 시스템의 핵심 요소인 웹 기반 XML/EDI시스템의 전체적인 설계 및 구현에 대해서 기술하였다. 본 논문에서 구축한 XML/EDI 시스템은 문서 생성 모듈, 문서 저장 모듈, 문서 검색 모듈, 문서 관리 모듈, E-mail전송 모듈로 구성된다. XML/EDI 시스템의 요구사항 및 설계 목표에 대하여 소개하고, 상세한 모듈별 기능정의 및 설계사항을 기술하였으며, 구현된 시스템의 실행 과정을 설명하였다.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.137-147
• /
• 2013

Objectives: This study was conducted in order to evaluate the limitations of the regulations on the safety and health standards for special management materials(SMM) under the Industrial Safety and Health Act in Korea. Methods: Hazardous chemicals management systems in Germany(Hazardous Substances Ordinance), the UK(Control of Substances Hazardous to Health Regulations), Japan(Ordinance on Prevention of Hazards due to Specified Chemical Substances) and Korea(Regulation of Occupational Safety and Health Standards, ROSHS) were investigated and compared in terms of 14 items. Results: Among the 14 items, we eventually found seven items which should be amended: 1) definition and scope, 2) general duties clause, 3) principles of management, 4) preventive measures, 5) control measures, 6) risk assessment, and 7) record keeping. The principal limitations of Korean regulations in comparison with those of other countries were that there were no preventive measures such as substitution, and no principles of good practices for the control of exposure to SMM. In terms of control measures, there were no regulations on suitable workplace design, reducing the number of exposed workers, reducing the level and duration of exposure, and reducing the quantity of hazardous substances in ROSHS. Conclusions: Based on the results of this study, ROSHS should be complemented with preventive measures and the principles of management related to SMM. According to the suggestions, an employer who deals with SMM should preferably consider the possibility of substitution and perform substitution so far as is reasonably practicable.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.509-517
• /
• 2011

최근 일본, 뉴질랜드의 대지진과 같은 대규모 자연재해가 빈번하게 발생하고 있으며, 그 피해규모 역시 방대하다. 자연재해로 인한 긴급 상황에 효율적으로 대처하기 위해서는 재해지역의 정보를 신속 정확하게 취득하는 것이 중요하다. UAV는 낮은 고도에서 비행할 수 있고, 적은 운용비용으로 재해지역의 정보를 수집할 수 있는 효과적인 방법이다. 본 연구에서는 국내외 재해탐지용 UAV운용 관련 규정에 대한 조사 및 분석을 수행하여, 문제점을 도출하고 개선방안을 제시하고자 하였다. 재해탐지용UAV는 항공법 상 명확한 규정이 수립되어 있지 않지만 초경량비행장치로 분류할 수 있으므로 초경량비행장치에 재해탐지용UAV의 정의, 범위, 탑재장비 등의 항목이 추가되어야 할 것이다. 또한 비행허가절차로 인해 효율적인 운용이 어려운 실정이며, 이러한 문제 해결을 위한 예외 규정의 제정이 필요하다. 향후, UAV를 적용한 실제 재해탐지 사례를 바탕으로 현행 규정에 대한 분석적인 연구가 병행된다면 실시간 재해탐지 및 피해조사를 위한 체계적인 개선방안을 제시할 수 있을 것이다.