• 제목/요약/키워드: Scientific preference

검색결과 92건 처리시간 0.025초

탐구 수업 설계 강좌에서 예비 중등 과학 교사의 위치짓기와 인식적 이해 탐색 (Exploring Pre-Service Science Teachers' Positioning and Epistemic Understanding in a Course about Designing Inquiry-Based Lessons)

  • 하희수;강은희;김희백
    • 한국과학교육학회지
    • /
    • 제40권3호
    • /
    • pp.307-320
    • /
    • 2020
  • 본 연구에서는 탐구 수업 설계 강좌에서 공동의 탐구 수업을 설계하고 시연하였음에도 탐구 수업에 대한 서로 다른 인식적 이해를 보여준 예비교사인 도형과 진우에게 주목하여, 강좌에서 그들의 위치짓기가 탐구 수업에 대해 서로 다른 인식적 이해를 구성하는 과정에 어떻게 반영되었는지 탐색하였다. 이를 위해 두 예비교사의 탐구 수업 설계 및 시연 과정에서 만들어진 산출물들을 수집하고 수업 시연을 녹화 및 전사하였으며, 두 예비교사와의 논의를 녹음 및 전사하여 본 연구의 분석 자료로 활용하였다. 연구 결과, 도형은 강좌 전반에 걸쳐 교수자에게 평가받는 대상으로 위치한 것이 부각된 반면, 진우는 평가 대상으로 위치함과 함께 탐구 수업에 대한 이해를 구체화하고 수업 설계에 관한 전문성을 향상시키는 예비교사로 위치한 것 또한 강좌 전반에 걸쳐 나타났다. 도형과 진우의 위치짓기는 그들이 탐구 수업 설계 및 시연 과정에서 탐구 수업에 대한 인식적 이해를 정교화하는 과정에 반영되었다. 탐구 수업 설계 과정에서는 도형과 진우 모두 탐구 수업을 학생이 교사의 안내 하에 가설을 설정하고 검증하는 사고와 실행 과정을 수행하는 것으로 설명했다는 점에서 공통된 이해를 보였으나, 수업 시연에서 예상치 못한 상황을 마주하면서 상이한 인식적 이해를 구성하는 양상을 보였다. 도형은 자신이 계획대로 수업에서 일어날 수 있는 상황을 예상하고 그에 반응하여 좋은 평가를 받기 위해 학생들이 실험을 진행하여 교사가 예상한 실험 결과가 나오는 수업이라는 통제된 탐구 수업을 추구하였다. 그에 반하여 진우는 학생의 선지식을 바탕으로 한 추론 과정을 중시하면서 탐구 수업을 학생들이 그들의 선지식을 바탕으로 과학자들과 같은 추론 과정을 따라가 지식을 구성하는 과정이라고 이해하였다. 예비교사 교육 과정에서 예비교사의 위치짓기가 그들의 인식적 이해에 어떻게 반영되는지 탐색한 본 연구 결과는 탐구 수업에 대한 예비교사의 인식적 이해 정교화를 지원하는 전략을 마련하는 데에 기여할 것이다.

게임 속 PPL의 효과에 영향을 미치는 요인에 관한 연구 (A Study on the Causes That Have Influence over the Effect of PPL in the Game)

  • 김영락;조윤곤;최귀영
    • 한국멀티미디어학회논문지
    • /
    • 제13권8호
    • /
    • pp.1256-1262
    • /
    • 2010
  • 본 연구는 상당히 활발히 이루어지고 있는 게임에서의 PPL 현실에 비해 그 효과를 다룬 연구들이 많이 수행되지 못한 현실을 고려하여, 게임 속 PPL에 효과에 영향을 미치는 요인에 관하여 연구를 수행하였으며, 구체적으로는 게임의 장르와 게이머의 게임 숙련도에 따라 게임 속에서 PPL 브랜드의 인지도와 선호도에 미치는 영향력이 어떻게 나타나는지를 살펴보고자 한다. 게임의 장르는 크게 역동적인 게임과 정적인 게임으로 분류하여 분석하였으며, 구체적으로는 역동적인 게임으로 레이싱게임인 포르자모터스포츠를 대상으로 하였으며, 정적인 게임으로는 보드게임인 숨은그림찾기를 대상으로 하였다. 게임의 숙련도는 높음과 낮음으로 분류하여 분석하였다. 분석 결과 화면의 변화가 심한 역동적인 레이싱 게임에 비해 정적인 게임 진행방식을 갖고 있는 보드게임에 삽입된 PPL 브랜드에 더 큰 효과를 나타낼 수 있음을 알 수 있다. 그리고 레이싱 게임과 보드 게임에서 모두 게임의 숙련도가 더 높은 사람에게 PPL 효과가 더 있는 것으로 분석되었다.

기준병상수와 상급병상수의 적정규모에 관한 연구 (A Study on the optimum scale of the number of beds of both the standard and the high-class)

  • 백승준;유승흠;손태용
    • 한국병원경영학회지
    • /
    • 제6권3호
    • /
    • pp.109-129
    • /
    • 2001
  • The purpose of this study was the acquisition of the optimum scale of the apportionment of standard & high-class bed for the maximum profit representative of the desire of customers in a General Hospital with 1,100 beds located in Seoul. This investigation was proceeded by the analysis of the result of the simulation with the survey of both the patients' needs for bed and the degree of the medical service by the grade of the ward. And finally the consequence was obtained as follows: 1. The result of the investigation of the inpatients' preference for the grade of ward classes shows that a private ward reflected 4.3 percent, a semi-private ward 1.7 percent, a three-bed ward 0.1 percent, and a ward with six beds 93.9 percent each other. 2. A questionnaire poll was paralleled of service terms of a medical doctor and a nurse by ward class, the data were used for the standard of the allotment of labor cost by the ward class. The poll shows that the service tenn of a medical doctor and a nurse based on a ward with six beds by ward class showed 1.7 times in internal medicine and 1.9 times in surgery at a private ward; 1.4 times in internal medicine and 1.7 times in surgery at a semi-private room; and 1.2 times both in internal medicine and in surgery at a three-bed ward 3. The resultant findings revealed the most profit per bed and per patient in a private ward. However, an analysis of profit with a standard of unit area by ward class represented a higher profit in both the internal medicine and the surgery semi-private ward than other ward classes. 4. The result of the analysis through simulation based on the data of the prime cost per the ward class proved the optimum scale of the distribution of beds by class as follows: sixteen beds of the internal medicine and twenty three beds of the surgery in the private ward; two hundreds and two of the internal medicine and one hundred and ninety eight of the surgery in the semi-private room; three of both the internal medicine and the surgery each other in the three-bed ward; one hundred and ninety eight of the internal medicine and two hundred and fifty two of the surgery in the ward with six beds. The result of this research exhibits that the income and expenditure of the hospital could be improved by changing parts of wards into private ones(containing the maximum profit per a unit of width) in case the scale of the number of beds is reset with the consideration of the profit per the unit width. In the near future it's strongly expected that the research for the more scientific standard of the allotment of labour cost by ward class and for definition of the optimum scale of the number of beds that actualize the maximum profit with the change of the three elements of the prime cost: cost of materials; labor costs; management expenses.

  • PDF

석면 해체 및 제거 작업의 안전성평가 제도에 대한 설문조사 및 개선 방안에 관한 연구 (Study on Surveying and Improving of Risk Assessment System for Asbestos Abatement)

  • 장재필;노영만;정기효
    • 한국산업보건학회지
    • /
    • 제30권2호
    • /
    • pp.205-212
    • /
    • 2020
  • Objectives: The purpose of this study was to identify the needs and improvement measures of the risk assessment system through a survey of asbestos abatement companies. Methods: This study prepared a questionnaire that includes improvement measures for the risk assessment system(six questions) and the necessity of a risk assessment system for asbestos abatement(one question). The questionnaire was sent to 2,170 asbestos abatement companies and returned by 83 companies(return rate = 3.8%). We conducted frequency analysis, ANOVA, and Chi-squared testing at the 5% significance level. Results: This study analyzed the survey results and identified six main opinions on the risk assessment system and improvement measures. First, giving an advantage to companies with a high grade(S and A grades) in public bidding and/or qualification screening showed a similar preference(agree: 50.6%, disagree: 49.4%). Second, 57.6% of the respondents wanted to allow air showers along with water showers for low risk asbestos work. However, 23.2% of the respondents asserted that only a water shower should be allowed since there is no scientific evidence supporting the removal of asbestos by air shower. Third, in order to prevent missing the enrollment of workers, simply submitting a change report should be allowed when any worker is changed (40.0%). Fourth, 43% of the respondents answered that they did not know how to calculate the proper number of negative pressure units. The reasons given were a lack of guidelines or standards(38.9%), inconvenience (36.1%), and absence of education(25%). Fifth, the respondents who were favorable toward the necessity of a risk assessment system gave higher scores compared to unfavorable respondents on the necessity of the management of workers' work history(favorable respondent = 3.96 out of 5, unfavorable respondent = 2.68) and the necessity of professional training for workers(favorable respondent = 3.71, unfavorable respondent = 2.56). Finally, the respondents favorable toward a risk assessment system showed higher scores on the awareness of calculating the proper number of negative pressure units(4.79) compared to unfavorable respondents(3.3). Conclusions: The opinions of asbestos abatement companies identified through the survey in this study can be usefully utilized as fundamental information to improve the risk assessment system.

한국 산업도자에 있어서 모듈변화의 실측 연구 : 최근 50년간 식기를 중심으로 (A Measurement Study of the Modular Shifts in Korean Industrial Ceramic - On the Tablewares during Last 50 Years)

  • 손연석
    • 조형예술학연구
    • /
    • 제2권
    • /
    • pp.42-89
    • /
    • 2000
  • Industrial ceramic of Korean industrial design, especially tableware show different characteristics in their forms between 1940s-1960s, and 1970s-1990s. The shift of such changes can be verified objectively by module measurement. The validity of the results applying this method is supported by the investigation of the change of aesthetic modes in Korean society. The most obvious change in the figurative characteristics of tableware is in the outline of their external shapes. 'Module' is used to describe and analyze the changes of such an external shape more strictly as the objective method and measuring the module is employed. This method was developed by the combination of the method analyzing figurative art works by Re Corbuise who uses 'module' with Hambidge's method to describe and analyze the works by means of the golden section. The shift of flgurative changes of tableware could be examined objectively and elaborately by such a newly developed method. The industrialization of tableware production in Korea was begun in 1940s. Then its design was not activated, but as the society has been stabilized through the liberation and civil war, design was settled in 1960s. After that, the design has played the essential roles in 1970s. And as the importance of design in producing goods has been recognized according to the economic growth. The design of tableware shows a remarkable difference based on 1960s and 1970s in such an economic growth. It is resulted from the scientific data analysis of the design since 1940 without any preference. According to the results which analyze the external shapes of tableware for last 50 years, the tableware designs show much differences between 1940s-1960s, and 1970s-1990s. The figurative changes of Korean tableware show the similar trends to the transitional aspects of the society. Design is the manifestation of aesthetic modes which have been developed in a close relationship to society and especially economy. In Korea the development of design was initiated by the economic growth and the Korean aesthetic modes were also changed with the economic growth. The transitional shift of aesthetic modes shown in the figurative characteristics of tableware which are divided on the basis of 1960s and 1970s was peak in 1970s with the development of economy and design started in 1960s.

  • PDF

연근정과의 재료 및 조리방법에 관한 연구 (A Study on the Ingredients Preparation Method of Lotus Root Jung Kwa)

  • 조신호;강유경;이효지
    • 한국식품영양과학회지
    • /
    • 제13권1호
    • /
    • pp.42-50
    • /
    • 1984
  • 설탕이나 꿀에졸인 한국의 전통적인 한과류의 하나인 정과를 1600년대 부터 현재 까지 소개된 조리책을 중심으로 정과의 변천과정을 정리하고 아울러 연근정과를 주제로 연근의 삶는 방법과 물, 설탕, 꿀의 배합비, 졸임시간의 변화가 연근정과의 모양, 맛, 질감, 색에 어떤 영향을 주는 가를 관능검사와 기계적 방법으로 알아내어 가장 과학적이고 효과적인 제조방법을 알아낸 결과는 다음과 같다. (1) 조리책에 소개된 정과의 종류는 34종류이며 그 중 연근정과가 가장 많이 소개되었다. (2) 처음에는 정과를 졸일 때. 꿀을 사용했으나 1843년에 출판된 음식법(飮食法)에서 처음으로 설탕을 사용해서 졸인 감자정과가 소개되었다. (3) 연근을 7 mm 두께로 썰어 물 150 ml, 연근 100 g, 식초 4 ml를 넣고 12분간 삶는다. 이 때의 hardness는 5.86 mm였다. (4) 모양, 맛, 진감, 적에 가강 좋은 영향을 주는 물의 량은 200 ml 였고 이 때의 hardness는 3.3 mm 였다. (5) 모양, 맛, 질감, 색에 가장 종은 영향을 주는 설탕의 양은 30 I이었고 이때의 hardness는 3.8mm 이었다. (6) 모양, 맛, 질감, 색에 가장 좋은 영향을 주는 꿀의 앙은 40 g 이었고 이 때의 hardness는 4.9 mm 였다. (7) 가장 좋은 졸임시간은 삶은 연근 100 g에 물 200 ml, 설탕 30 g을 넣고 30분간 졸이다가 꿀 40 g을 넣어 12분간 졸인다. 이 때의 hardness는 4.9 mm 였다. (8) 연근정과를 만드는 가장 좋은 방법은 연근 100 g, 물 200 ml, 설탕 30 g꿀 40 g으로 총 42분간 졸이는 것이다.

  • PDF

전립선비대증의 진료지침 개발을 위한 한국문헌의 메타분석 (Meta-analysis of the Korean Literatures for Developing Clinical Practice Guidelines of Benign Prostatic Hyperplasia)

  • 유승흠;김춘배;강명근;송재만
    • Journal of Preventive Medicine and Public Health
    • /
    • 제30권3호
    • /
    • pp.643-664
    • /
    • 1997
  • This study is to provide evidence-based recommendations for the most-effective treatments of benign prostatic hyperplasia based on patient preference or clinical need, and to meta-analyze the Korean literatures for the development of BPH treatment guidelines. For these analyses, extensive literature searches (208 articles), with priority given to the Korean Journal of Urology, were conducted from 1960 to August, 1996. Meta-analysis, like all statistical analysis, has two main functions: data summarization (qualitative meta-analysis) and smoothing o. pattern recognition (quantitative meta-analysis). As well, critical reviews and syntheses with the mean and 90-percent confidence intervals for the likelihood were used to evaluate empirical evidence and significant outcomes of the BPH treatment literatures (106 articles). For this task, the Methodologic Panel for BPH Guidelines was composed of multidisciplinary experts in the field. The results of the study were summarized as follows: For all that watchful waiting is an appropriate treatment strategy for the majority of patients with prostatism, we couldn't find the Korean literatures which carried this article. The literatures on alpha-1-adrenergic receptor blockers provide no evidence to suggest that any one alpha blocker is more effective than another. The finasteride reduces the size of the prostate, on average, and leads to a small yet perceptible reduction in sysptoms. Of all treatment options, prostate surgery with transurethral resection of the prostate (TURP), transurethral incision of the prostate (TUIP), and so on, offers the best chance for symptom improvement. However, surgery also has the highest rates of significant complications. Therefore, surgery need not always be a treatment of last resort. Balloon dilation of the prostatic urethra is clearly less effective than surgery in relieving symptoms, but it is associated with fewer complications. Emerging technologies for treating BPH include lasers, coils, stents, thermal therapy and hyperthermia. Established technologies will also be reanalyzed as results of new trials are reported. Although this study has some limitations due to lacking for good quality literatures, ' it provides a cornerstone for our medical research. It represents the most current scientific knowledge regarding the clinical epidemiology including treatment of BPH. It will be revised and updated as needed.

  • PDF

재래식 된장과 시판된장의 관능적 특성 및 소비실태 (Consumption Pattern and Sensory Evaluation of Traditional Doenjang and Commercial Doenjang)

  • 안선정;복혜자
    • 한국식생활문화학회지
    • /
    • 제22권5호
    • /
    • pp.633-644
    • /
    • 2007
  • The study results regarding the ingredient differences, sensory characteristics, purchasing type, usage and improvement direction for home-made traditional doenjang and factory produced commercial doenjang are as follows. The L-value indicates that home-made traditional doenjang has a higher value in average than the factory produce done, and the a-value indicates the opposite. Home-made traditional doenjang had higher water content than commercial doenjang ; however the pH values of commercial doenjang and home-made were 5.34 and 5.32 respectively, which was very similar. Factory produced commercial doenjang showed higher protein content than the home-made traditional doenjang. Regarding the correlation between ingredients, there was a significantly negative relationship between the L-value and a-value but a significantly positive relationship between the L-value and b-value. There were no significant relationship with water content, pH and protein content. For the color and taste, which are the sensory characteristics, commercial doenjang showed higher value than the traditional doenjang, but for smell, the values were similar. Regarding grittiness, the factory produced commercial doenjang had bigger particles than the traditional doenjang. Preference was a bit higher in the traditional doenjang. Of the 380 study subjects, most were from 40 to 49 years old (65.5%), and the most family type were nuclear families which was a total of 400 people (69%). Moreover, the most residential type was apartment which was 355people (61.2%), and for the monthly income, more than 2,510,000won was 48.3%. For the educational background, college education was 304 people (52.4%), and high school education was 199 people, 34.3%. In the usage, most of the people eat doenjang more than once a week, and usually their parents make the doenjang. People used both commercial doenjang and home-made traditional doenjang >home-made only >factory produced commercial doenjang only in that order. The reasons for using the home-made traditional doenjang aredelicate taste and flavor>more nutritious> anti-cancer ingredients in that order. The reason they use the factory produced commercial doenjang is because they don't know how to make it at home. The things that needed to be improved in the home-made traditional doenjang are bad smell> entire quality> flavor> color in order, indicating that studies for reducing bad smell are required. The things that needed to be improved in the factory produced commercial doenjang are taste & flavor> entire quality>bad smell> color in that order, indicating that people are more concern about it tasting like home-made than the smell. From the above results, we can see that better functional doenjang should be developed for family health and to increase the consumption of the doenjang, which has good functional psychological activities, also more various types of foods that use doenjang and scientific studies to reduce the home-made doenjang smell should be continuously studied. Moreover, studies on how to make the factory produced commercial doenjang taste more like traditional doenjang should be performed.

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

환경관리주의 환경교육에 대한 비판적 고찰 - 원인규명에서 해결기제로의 전환을 위하여 - (A Critical Approach on Environmental Education Biased to Environmental Possibilism - From Clearing up the Cause to Problem-Solving Mechanism -)

  • 김태경
    • 한국환경교육학회지:환경교육
    • /
    • 제18권3호
    • /
    • pp.59-74
    • /
    • 2005
  • We can't deny Korean EE has basically developed on the basis of Environmental Possibilism (Environmental management or Reformism) in lots of aspects. I would show three representative proofs here, the first, the philosophy of Korean EE has been mainly focused on dichotomy of human-techno centrism and eco-centrism with no considering other alternative environmentalism since 4th Formal Curriculum, 1981. The second, simultaneously, the concept of EE has not distinguished from it of Science education. (Furthermore, unfortunately some says EE has been a part of Science education, although there should be many differences on its contextual aspect.) And the third one is that the limit of possibilism which market economists have worried, has scarcely mentioned in various kinds of EE-related teaching materials. Possibilism is basically likely to be accompanied by science and economics-oriented approach, and in this aspect this dichotomy, human-techno centrism and eco-centrism, has come from perspectives of Economical development process and over-addicted belief to Science. So it is enough to say that Korean EE has basically developed with biased to Environmental possibilism, in other words, biased to preference to it. And I'll critically focus on these two axes of possibilism, Science and Economics and its dichotomy. Of course, we should accept there are so many same parts in its contents between EE and Science, but we should know its contextual differences for triangular position of environmentalism suitable to EE and also overcome science-dependant approach to EE. Although science-dependant approach to EE and dichotomy could provide some tools for clearing up the causes of environmental problem, especially always it has insisted fundamental causes of environmental problem originated in human faults and over-use of eco-source or over-economic development, but now it is old-fashioned discourse, furthermore it come to have unavoidable limits in the debates of problem-solving mechanism to environmental problems. The paramount important thing is to supply the ways or thoughtful mechanism for solving or coordinating the Environmental problems, not just searching for cause of it. But scientific approach and its dichotomy based on possibilism have continuously born cause & effect in EE-related discourse. So there are so much needs to transfer from continuous bearing of cause & effect to constructive alternatives at least in environmentalism of EE. Traditionally, dichotomical division in EE Environmentalism, human-techno centrism and eco-centrism, couldn't have Provided any answers to our real society, it just gives us only cause & effects of Environmental problems. And also we can't find the description on the limits of capitalism market approach to Environmental problems especially in Korean EE text books, other teaching materials and its teaching-learning process, although market approach economist has been proved its fault beyond its functional merits as Environmental management tools. So we should introduce other alternative Environmental philosophy instead of Possibilism such as eco-socialism insisted by Schmacher M. and Boochin etc, or marxist-environmentalism for relative and comparative views to market-thought such as commodification. In this aspect we need to accept Oriental philosophy based on moderation(中庸) as new another alternatives with the reflection that we have recognized monism as representative Oriental philosophical environmentalism. Fundamentally monism has done its role with providing relative concepts to Dichotomy Enlightenment, but we can't say it has been core concept for understanding of oriental environmentalism, and we can't distinguish monism from oriental philosophy itself, just because oriental thought itself was basically monism. So conceptual difference should be recognized between EE and Science education in teaching-learning process on the basis of life-philosophy(Philosophie des Lebens) from epistemology. For this transformation, we should introduce existentialism in Science education, in other words, only existential Science education based on phenomenology or interpretivism can be EE. And simultaneously we need some ways for overcoming of scientific foundationalism which has been tradition making science not stand on existentialism, formulating and featuring of almost all of natural things and its phenomenon from after enlightenment in western world, but it has malfunctioned in fixing conception of science just into essentialism itself. And we also introduce integrated approach to science and society for EE like STS. Those are ways for overcoming of Environmental possibilism in EE.

  • PDF