• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.31-39
• /
• 2015

This paper presents the static and kinematic positioning accuracy by the real-time GPS positioning modes of the low-cost GPS receivers using NTRIP-based augmentation service. For this, acquires both the raw measurements data of the field tests by LEA 6T GPS module of u-blox AG, and correction communication via NTRIP caster with RTKLIB as an open source program for GNSS solution. With computing the positions of the check points and road tracks by six kinds of GPS positioning modes which are Single, SBAS, DGPS, PPP, RTK, and TCP/IP_RTK, compared these results to the reference position of the check points. The position error average and rmse of the static test by GPS L1 RTK surveying showed $N=0.002m{\pm}0.001m$, $E=0.004m{\pm}0.001m$ in horizontal plane, and $h=-0.116m{\pm}0.003m$ in vertical, these results are very closed to the coordinates with the geodetic receiver. Especially, in case of the kinematic test with obstacles located on both sides of road, the computed track with ambiguity fixing showed very similar trajectory considerably from VRS network RTK mode. And also, evaluate and verify the performance of the TCP/IP_RTK mode developed based on TCP/IP protocol.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.21-30
• /
• 2010

In this paper, the parallel distributed rainfall runoff model(K-DRUM) using MPI(Message Passing Interface) technique was developed to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The K-DRUM model which is based on GIS can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. The comparison studies were performed with various domain divisions in Namgang Dam watershed in case of typoon 'Ewiniar' at 2006. The numerical simulation using the cluster system was performed to check a parallelization effectiveness increasing the domain divisions from 1 to 25. As a result, the computer memory size reduced and the calculation time was decreased with increase of divided domains. And also, the tool was suggested in order to decreasing the discharge error on each domain connections. The result shows that the calculation and communication times in each domain have to repeats three times at each time steps in order to minimization of discharge error.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.99-110
• /
• 2009

The main purpose of the current research is to developments a real-time Hardware In-the-Loop (HIL) simulation testbed for the satellite formation flying navigation and orbit control. The HIL simulation testbed is integrated for demonstrations and evaluations of navigation and orbit control algorithms. The HIL simulation testbed is composed of Environment computer, GPS simulator, Flight computer and Visualization computer system. GPS measurements are generated by a SPIRENT GSS6560 multi-channel RF simulator to produce pseudorange, carrier phase measurements. The measurement date are transferred to Satrec Intiative space borne GPS receiver and exchanged by the flight computer system and subsequently processed in a navigation filter to generate relative or absolute state estimates. These results are fed into control algorithm to generate orbit controls required to maintain the formation. These maneuvers are informed to environment computer system to build a close simulation loop. In this paper, the overall design of the HIL simulation testbed for the satellite formation flying navigation and control is presented. Each component of the testbed is then described. Finally, a LEO formation navigation and control simulation is demonstrated by using virtual scenario.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.11
• /
• pp.93-104
• /
• 2018

Purpose - For small and medium sized firms, CEO characteristics are main factor influencing firms' prosperity as well as performance. So it is quite natural that many people are interested in factors of CEO that matters. In this research, CEO characteristics in terms of capabilities and skill or special knowledge necessary to run the business are invested for manufacturing firms. Precedent studies reveal that CEO characteristics such as psychological factors including desire to succeed, tendency to take risks, personal factors including age, year of running business, and task related factors including managing capability, communication skills, network influence firm performance for manufacturing firms. However, these studies simply verify whether or not those factors affect firm's managing performance. This study, however, goes further to investigate how is the affecting process from CEO's capabilities and organization characteristics to firm's core competence, and from core competence to advantages, and from advantages to managing performance. Research design, data, and methodology - We make a questionnaire and surveyed manufacturing firm CEO's in Gyeonggi-do area. General characteristics analysis, factor analysis, regression analysis, and control effect analysis was conducted. SPSS 2.0 Win, version was used. Results - The CEO characteristics including basic capability, task capability, leadership, and organization characteristics affect core competence at the statistically significant level. And, core competence affect both price advantage and differentiation advantage at the significant level. Some unique finding is that while differentiation advantage affects both financial achievement and non-financial achievement, price advantage does not affect both financial and non-financial achievement. And firm characteristics mainly measured by CEO characteristics of skills has control effects on the trace from core competence to price advantage. Conclusions - For small and medium sized firms CEO characteristics is the most important factor influencing firm's prosperity. For manufacturing firms, whether CEO has the skill or special knowledge to run the firm is critical factor. The study results show that CEO's for manufacturing firms put importance on price and price advantage which seems to be familiar to them. However, the price advantage does not influential to financial and non-financial achievement. This result suggests that small and medium sized manufacturing firms' CEO's should make effort to improve other aspects of advantages to be more competitive.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.369-376
• /
• 1993

Since nursing has come of age both as a profession and as a scholarly discipline, there has been increasing concern with delineating its theory base. In 1978 Chinn and Jacobs asserted that “the development of theory is the most crucial task facing nursing today.” The basic building blocks of theories are concepts. Concept formation begins in infancy, for concepts help us to categorize and organize our environmental stimuli. Concepts help us to identify how our experiences are similar or equivalent by categorizing all the things that are alike about them. concepts can be primitive, concrete, or abstract. Concept Analysis is a strategy that examines the attributes or characteristics of a concept. It is a formal, linguistic exercise to determine those defining attributes. It encourages communication. Its basic purpose is to distinguish between the defining and irrelevant attributes of a concept similarities. It is a process of determining the differences between concepts and it is useful for several reasons. It is an excellent way to begin examining information in preparation for research or theory construction and results in an operational definition and a list of defining attributes and antecedents. It provides the scientist with an excellent beginning for a new tool, is an excellent way of evaluating an old one and is useful in evaluating existing instruments. The steps of concept analysis are : 1. Select a concept, 2. Determine the aims or purposes of the analysis, 3. Identify all uses of the concept that you can discover, 4. Determine the defining attributes, 5. Construct a model case, 6. Construct borderline, re-lated, contrary, invented, and illegitimate cases, 7. Identify antecedents and consequences, 8. Define empirical referents. In this paper, the concept selected for analysis was Love. The concept of love is of great interest to nursing because loving care is considered vital to the nursing care of patients. The aims of the concept analysis of love were to clarify the meaning of love, to develop an operational definition for it and to contribute to existing nursing theory. Love influences the quality of life which is the goal of nursing according to Parse in her Human Becoming Theory. Lived experiences are the entities for study in Parse's Research Methodology. Human caring, human understanding, and human becoming are the most important issues in lived experiences. In this research, dictionaries and literature from nursing philosophy and other human disciplines were used to identify the concept of love. As many different instances of the concept as could be found were examinned. The model case was a real life example of the use of the concept. Next borderline, related, invented, and contrary cases were constructed for the purpose of providing examples of “not the concept” and for promoting further understanding of the concept being discussed. The defining attributes of the concept of love were concern, responsibility, respect, understanding and dedication. Love was defined as showing concern and understanding. relating with mutual respect and dedicating oneself responsibly to others. Concept analysis is a highly creative activity and may add significant new information to a given area of interest. It is a strategy for developing a concept based on observation or other forms of empirical evidence. The purpose of concept analysis is to generate new ideas. It provides a method of examining data for new insights that contribute to theoretical development. This concept analysis suggests that a nurse’s love for patients is shown in the process of giving oneself in mutual relationships of responsibility and respect and in continuously providing understanding and quality human care for them.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.3
• /
• pp.337-352
• /
• 2003

Purpose: The purpose of this study is to analyse research trends related to the evaluation of quality of nursing, thereby obtaining basic data relating to the identification of current situation of instrument development of quality of nursing, and of future research orientation and to the development of performance index of nursing organization. Method: The data were collected from June to December, 2002 through the review of total of 32 research papers which had evaluated quality of nursing among published papers in Korea from 1976 to August 2002. The analysis was done in terms of research period, the periodicals in which research papers were published, domains and the approaches of evaluation of nursing quality. The content analysis of lowest-level items amounting was performed using NIC developed by McCloskey & Bulecheck(1998) and consequential indices of quality of nursing developed by Chi(1995). Results: Twenty-three of 32 papers(71.8%) turned out to be published after 1995, indicating surging interest in the evaluation of quality of nursing from the mid 1990s. Also, ten of 12 research papers dealing with subjects' diseases were published after 1995. In content analysis of lowest-level items of the process-oriented evaluation of quality of nursing, the highest nursing intervention was patient education about procedure and treatment; followed in descending order by patient education about disease process, strengthening of communication, managing environment, infection control, admission care, defecation and urination care. In content analysis of lowest-level items of the outcome-oriented evaluation of quality of nursing, items of physical and psychological state, of patient and family satisfaction, of knowledge and home care, of change of patients' state, of addressing nursing issues, and of patient recovery were the outcome indicators in more than 60 percent research papers. Conclusion: The findings provided the foundation for their effective use in nursing practice with comparing and presenting various core evaluation items representing process and outcome domains.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2003

Purpose : To evaluate the relationship between morphometric analysis of bone microstructure from digital radiographic image and trabecular bone strength. Materials and Methods : One hundred eleven bone specimens with 5 mm thickness were obtained from the mandibles of 5 pigs. Digital images of specimens were taken using a direct digital intraoral radiographic system. After selection of ROI (100 × 100 pixel) within the trabecular bone, mean gray level and standard deviation were obtained. Fractal dimension and the variants of morphometric analysis (trabecular area, periphery, length of skeletonized trabeculae, number of terminal point, number of branch point) were obtained from ROI. Punch sheer strength analysis was performed using Instron (model 4465, Instron Corp., USA). The loading force (loading speed 1 mm/min) was applied to ROI of bone specimen by a 2 mm diameter punch. Stress-deformation curve was obtained from the punch sheer strength analysis and maximum stress, yield stress, Young's modulus were measured. Results: Maximum stress had a negative linear correlation with mean gray level and fractal dimension significantly (p<0.05). Yield stress had a negative linear correlation with mean gray level, periphery, fractal dimension and the length of skeletonized trabeculae significantly (p < 0.05). Young's modulus had a negative linear correlation with mean gray level and fractal dimension significantly (p < 0.05). Conclusions : The strength of cancellous bone exhibited a significantly linear relationship between mean gray level, fractal dimension and morphometric analysis. The methods described above can be easily used to evaluate bone quality clinically.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.129-142
• /
• 2002

Epithelial-mesenchymal interaction plays a important role in cell growth and differentiation. This interaction is already well known to have an importance during the organ development as well as cell growth and differentiation. However, in vitro experimental model is not well developed to reproduce in vivo cellular microenvironment which provide a epithelial-mesenchymal interaction. Because conventional monolayer culture lacks epithelial-mensenchymal interaction, cultivated cells have an morphologic, biochemical, and functional characteristics differ from in vivo tissue. Moreover, it's condition is not able to induce cellular differention due to submerged culture condition. Therefore, the aims of this study were to develop and evaualte the in vitro experimental model that maintains epithelial-mesenchymal interaction by organotypic raft culture, and to characterize biologic properties of three-dimensionally reconstituted oral keratinocytes by histological and immunohistochemical analysis. The results were as follow; 1. Gingival keratinocytes reconstituted by three-dimensional organotypic culture revealed similar morphologic characteristics to biopsied patient specimen showing stratification, hyperkeratinosis, matutation of epithelial architecture. 2. Connective tissue structure was matured, and there is no difference during stratification period of epithelial 3-dimensional culture. 3. The longer of air-exposure culture on three-dimensionally reconstituted cells, the more epithelial maturation, increased epithelial thickness and surface keratinization 4. In reconstitued mucosa, the whole epidermis was positively stained by anti-involucrin antibody, and there is no difference according to air-exposured culture period. 5. The Hsp was expressed in the epithelial layer of three-dimensionally cultured cells, especially basal layer of epidermis. The change of Hsp expression was not significant by culture stratification. 6. Connexin 43, marker of cell-cell communication was revealed mild immunodeposition in reconstitued epithelium, and there is no significant expression change during stratification. These results suggest that three-dimensional oragnotypic co-culture of normal gingival keratinocytes with dermal equivalent consisting type I collagen and gingival fibroblasts results in similar morphologic and immunohistochemical characteristics to in vivo patient specimens. And this culture system seems to provide adequate micro-environment for in vitro tissue reconstitution. Therefore, further study will be focused to study of in vitro gingivitis model, development of novel perioodntal disease therapeutics and epithelial-mensenchymal interaction.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.63-79
• /
• 2012

The purpose of this study is to empirically determine the structural relationship between employee constructs such as internal service quality, employee satisfaction, and organization commitment and customer constructs such as perceived value, customer satisfaction, and loyalty to suggest an effective business strategy for restaurant business. To do this, the study consulted with the Korea Restaurant Association, the representative of Korean food service and got the intention of participating in the research from the Daegu branch. As a result, 51 restaurants registered in the Daegu branch who showed their intention to participate were selected as an initial sample. Also, other restaurants were introduced through snow-ball sampling method by the owners of restaurants who finished responding to the survey, and total 100 restaurants were examined. A survey was conducted to external customers who visited restaurants and internal customers working there. For final analysis, 741 questionnaires of internal customers and 970 questionnaires of external customers were used. The result of analysis showed that team-work & communication in internal service quality has a significant effect on employee satisfaction, employee satisfaction on organization commitment, and organization commitment on value perceived by customers. Also, perceived value has a significant effect on customer satisfaction and loyalty, and customer satisfaction on loyalty.

• The Journal of Korean Academy of Sensory Integration
• /
• v.15 no.2
• /
• pp.93-106
• /
• 2017

Objective : The purpose of this study is to provide an evidence for clinical practice by systemic analysis on occupational therapy interventions for improvement of children's play. Methods : Articles used in this study were collected from database of Pubmed, ProQuest, EBSCOhost, Scopus, RISS, KISS, and National Library of Korea. The key words used in the search were "Play AND Occupational Therapy AND (Intervention OR Treatment)" and the publication period was limited from January 2007 to April 2017. 11 articles in total were selected for the systematic review analysis. Results : The results revealed that the majority of studies was one-group non-randomized study and the majority of intervention used was play-based intervention in case of that play itself was the intervention goal. The most frequently used environment for the intervention was parallel setting of home and treatment room. The majority of studies was for children with ADHD and the most commonly used assessment tool was Test of Playfulness (ToP). Dependent variables measured along with play were language skills, social interactive skills, communication and pragmatic skills, problem-solving skills, caregiver responsiveness, and parent-child interaction. Conclusion : This study help to understand the current state of occupational therapy intervention for improvement of children's play. Starting with the understanding, it is expected that various studies on play of children will be done in the future.