• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5148-5155
• /
• 2013

전기철도와 인접하여 병행 설치되어 있는 전기통신선에는 전자유도현상에 의한 유도전압이 발생하여 통신장애 및 안전사고가 발생할 수 있다. 이와 같은 유도장해를 경감시키고 통신신뢰성을 확보하기 위하여, 차폐케이블의 적용과 함께 최근 추진되고 있는 복선전철화에 따른 영향을 검토할 필요가 있다. 본 논문에서는 AT급전방식 전기철도에서 인근 통신선에 유기되는 유도전압에 영향을 미치는 각종 인수 및 산출식을 검토하고, 유도전압 발생 예측치를 시뮬레이션을 통하여 정량적으로 분석하였다. 시뮬레이션 결과, 복선철도에서는 단선철도에 비해 통신선 유도잡음 전압이 18[%] 정도 감소하여 타궤조 효과가 영향을 미치는 것으로 나타났다. 또한, 복선철도를 기준으로, 50% 차폐 통신케이블에서는 유도잡음전압이 1/8로 감소하였으며, 15% 차폐통신케이블에서는 1/15로 감소함에 따라 차폐효과가 크고 유도잡음전압 영향을 최소화할 수 있는 것으로 나타났다.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.777-784
• /
• 2006

The lateral dynamic behaviours of a track inspection vehicle with laterally guided system are studied for the safety and comfort. A 10-DOF dynamic model is proposed counting for lateral and yaw motions. The equations for motions of the vehicle running on curved tracks at a constant speed are presented. It is shown by simulation that lateral guiding forces applied to the guiding wheels on the inner side of the track increase in a larger scale in comparison with those on the outer side when the vehicle passes through curved tracks with cant, and the front guiding spring forces is larger than the rears. Lateral vibrations due to yaw motions of the vehicle take place when the vehicle runs through curved tracks. Finally, effect of the lateral guidance on the vehicle dynamics is also examined and advantages of such a guiding system are discussed in some details. An optimal guided control is applied to restrain the lateral and yaw motions. The comparisons between the active and passive guidance explain the effect of the active control approaches.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.130-135
• /
• 2016

It is very hard to analyze the train derailment safety quantitatively at the curved section because of the diversified affect parameters including the complex interaction between wheel and rail, the train conditions such as the shape of wheel, suspension system, the track conditions such as the radius of curve, cant, transition curve, and the operation conditions, etc. Two major factors related to the running safety of railway vehicle are classified as the railway vehicle and the track condition. In this study, when the railway vehicle passing through curves of actual track condition of subway line NO.3 in seoul ($Yeonsinnae{\leftrightarrow}Gupabal$), the effect that has influence on running safety depending on rail inclination. The analysis result of 1/40 rail inclination condition is more favorable on running safety than other rail inclination conditions because derailment coefficient and wheel unloading ratio are the lowest.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.232-240
• /
• 2015

고속철도 차량기지에는 고전압임펄스(HVITC)와 AF 궤도회로를 사용하고 있다. HVITC는 열차의 위치검지 및 궤도 절손검지 기능을 하고, AF궤도회로는 열차제어 정보를 전송하여 고속열차의 이상 유무를 검지하는 출발 전 시험에 사용한다. 두 궤도회로는 별도로 구성되어 있고, 같은 레일을 사용하여 제어신호를 스위칭에 의해서 전송하고 있다. AF 궤도회로는 루프케이블을 궤도 안쪽에 설치하는 방법으로 구성할 수 있다. 그러면 스위치를 제거할 수 있고, 상시 시험용 제어신호를 전송할 수 있다. 이 경우에 두 궤도회로는 상호간섭이 발생할 수 있다. 본 논문에서는 두 궤도회로를 동시에 동작하는 경우에 발생되는 간섭을 두 회로의 모델링을 통하여 규명하였다.

• 한국터널지하공간학회 논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

본 연구에서는 터널 내 콘크리트 도상을 모사하여 현장실험을 수행하였다 그리고 도시철도터널 내 콘크리트도상의 반사소음을 저감하기 위한 다중국소공명 흡음판의 이론적 평가항목과 한계를 고려하여 허용한계를 연구하였다. 본 연구결과는 도시철도 터널 구간에서의 차량 주행속도에 따른 유동 영향에 의한 흡음판의 흡음계수를 분석하고, 구조안정성을 효율적으로 평가할 수 있는 최대 변위와 변위가 속도 및 동적특성인 감쇠비와 고유진동수를 효과적으로 도출할 수 있는 계측시스템을 제안한다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2006년도 춘계학술논문발표회 논문집
• /
• pp.128-133
• /
• 2006

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1050-1061
• /
• 2014

항공기 레이더는 하방 또는 사방의 공대공 표적을 탐지/추적하기 위하여 보통 MPRF 파형을 사용한다. 항공기용 레이더가 MPRF 파형을 운용하기 위하여, 거리/속도에서 존재하는 모호성을 해결하면서 클러터를 회피하여 하방 공대공 표적을 탐지할 수 있는 최적의 PRF들을 선택하여 운용할 수 있어야 한다. 이 논문은 실시간 환경변화 상황에서 표적을 탐지/추적하기 위한 최적의 PRF들을 실시간으로 찾는 방법을 제시한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.146-153
• /
• 2000

The rubber crawler system for farm machine is composed of driving units such as track rollers, driving sprockets and rubber crawlers. Vibration characteristics of the rubber crawler system varies by driving speed, center of gravity, mass□moment of inertial□location arrangement of track rollers and dynamic parameters such as dynamic spring constant (k) and viscous damping coefficient (c) of a rubber crawler. In general, vibration of the rubber crawler system occurs by reason for mechanical interaction between the rubber crawler and track rollers. Because the dynamic spring constant and viscous damping coefficient vary periodically by mechanical characteristics(deformation characteristics) of the rubber crawler when track rollers drive on the between lugs of the rubber crawler. Therefore, both dynamic parameters k and c were expressed as Fourier series by authors through the shaking test of the rubber crawler and further, vibration characteristics of the rubber crawler system could be simulated analytically. However, actual values of dynamic parameters k and c are different from those obtained by the shaking test because dynamic characteristics of the rubber crawler vary by the effect of variable tension and driving resistance of track rollers. So, actual values of k and c should be identified in the condition of actual driving test. In this study, dynamic parameters such as k and c of the rubber crawler system, which are expressed as Fourier series, were identified using the Gauss-Newton Method. Therefore, validity of identified parameters k and c was discussed through the simulation using experimental data of actual driving test. As a result, in the Fourier series of dynamic parameters of spring constant k and viscous damping coefficient c, excellent parameter convergence and simulation were observed using the Fourier series' zero order and first term of the dynamic model. Furthermore, it was clarified that identification for model parameters which are fitted to actual dynamic motion (vibration) wave of the crawler system was possible by using the time series data observed in vertical and pitching motion of the crawler system.

• 한국측량학회지
• /
• 제29권2호
• /
• pp.157-164
• /
• 2011

As high-resolution satellite images have enabled large scale topographic mapping and monitoring on global scale with short revisit time, agile sensor orientation, and large swath width, many countries make effort to secure the satellite image information. In Korea, KOMPSAT-2 (KOrea Multi-Purpose SATellite-2) was launched in July 28 2006 with high specification. These satellites have stereo image acquisition capability for 3D mapping and monitoring. To efficiently handle stereo images such as stereo display and monitoring, the accurate epipolar image generation process is prerequisite. However, the process was highly limited due to complexity in epipolar geometry of pushbroom sensor. Recently, the piecewise approach to generate epipolar images using RPC was developed and tested for in-track IKONOS stereo images. In this paper, the piecewise approach was tested for KOMPSAT-2 across-track stereo images to see how accurately KOMPSAT-2 epipolar images can be generated for 3D geospatial applications. In the experiment, two across-track stereo sets from three KOMPSAT-2 images of different dates were tested using RPC as the sensor model. The test results showed that one-pixel level of y-parallax was achieved for manually measured tie points.

• Structural Engineering and Mechanics
• /
• 제49권3호
• /
• pp.329-353
• /
• 2014

Increasing usage of tank cars and their intrinsic instability due to sloshing of contents have caused growing maintenance costs as well as more frequent hazards and defects like derailment and fatigue of bogies and axels. Therefore, varieties of passive solutions have been represented to improve dynamical parameters. In this task, assuming 22 degrees of freedom, dynamic analysis of partially filled tank car traveling on a curved track is investigated. In order to consider stochastic geometry of track; irregularities have been derived randomly by Mont Carlo method. More over the fluid tank model with 1 degree of freedom is also presented by equivalent mechanical approach in terms of pendulum. An active suspension system for described car is designed by using linear quadratic optimal control theory to decrease destructive effects of fluid sloshing. Eventually, the performance of the active suspension system has been compared with that of the passive one and a study is carried out on how active suspension may affect the dynamical parameters such as displacements and Nadal's derailment index.