• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.217-221
• /
• 2005

The E-field intensity by mobile handsets in a phantom is measured by a 3 axes miniature probe. The detected DC voltage by a Schottky diode in a probe has nonlinear characteristics by itself. If a pertinent diode compression point (DCP) is applied for the compensation specific absorption rate(SAR) as much as 200 W/kg can be measured with a good measurement accuracy.

• Korean Journal of Materials Research
• /
• v.25 no.7
• /
• pp.352-357
• /
• 2015

To research the characteristics of ITO film depending on a polarity of SiOC, specimens of ITO/SiOC/glass with metal-insulator-substrates (MIS) were prepared using a sputtering system. SiOC film with 17 sccm of oxygen flow rate became a non-polarity with low surface energy. The PL spectra of the ITO films deposited with various argon flow rates on SiOC film as non-polarity were found to lead to similar formations. However, the PL spectra of ITO deposited with various argon flow rates on SiOC with polarity were seen to have various features owing to the chemical reaction between ITO and the polar sites of SiOC. Most ITO/SiOC films non-linearly showed the Schottky contacts and current increased. But the ITO/SiOC film with a low current demonstrated an Ohmic contact.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.106-111
• /
• 1996

Schottky diodes are fabricated on laser annealed and unannealed polysilicon substrate and their electrical characteristics are studied and analyzed. Current of laser annealed devices are larger than that of unannealed devices because of grain growth, decrease of grain boundary and trap density, lowering of grain boundary barrier height, decrease of dopant segregation. At low forward bias (<0.7V), currents of unanealed devices are larger. Soft breakdown voltages of laser annealed devices are larger than that of unannealed devices.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.17-20
• /
• 2018

IGZO thin films were prepared on n-type Si substrates to research the interface characteristics between IGZO and substrate. After the annealing processes, the depletion layer was formed at the interface to make a Schottky contact owing to the electron-hall fair recombination. The carrier density was decreased by the effect of depletion layer and the hall mobility decreased during the deposition processes. But the annealing effect of depletion layer increased the hall mobility because of the increment of potential barrier and the extension of depletion layer. It was confirmed that it is useful to observe the depletion effect and Schottky contact's properties by complementary using the Hall measurement and I-V measurement.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.67-67
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.06a
• /
• pp.74-74
• /
• 1998

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.644-651
• /
• 2005

In this paper, a new predistortion method to reduce nonlinearity or a traveling wave tube amplifiers(IWTAs) is proposed. Nonlinear transfer characteristics of TWTA are analyzed using carrier complex power series. Inverse carrier complex power series or a predistortion linearizer to linearizer TWTA are also proposed. The inverse nonlinear distortion characteristics of predistorter can be realized with reflective structure that is composed of Schottky diode and resistive-terminated transmission line. The AM-to-AM and the AM-to-PM characteristics for TWTA by proposed predistortive linearizer on K-band were improved from -5.825 dB and -37.321^{\circ} to 0.786 dB and 6.742^{\circ}, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.640-645
• /
• 2010

This paper describes the power generating property of hydrothermally grown ZnO nanorods on a flexible polyethersulfone (PES) substrate. The piezoelectric currents generated by the ZnO nanorods were measured when bending the ZnO nanorod by using I-AFM, and the measured piezoelectric currents ranged from 60 to 100 pA. When the PtIr coated tip bends a ZnO nanorod, piezoelectrical asymmetric potential is created on the nanorod surface. The Schottky barrier at the ZnO-metal interface accumulates elecntrons and then release very quickly generating the currents when the tip moves from tensile to compressed part of ZnO nanorod. These ZnO nanorods were grown almost vertically with the length of 300-500 nm and the diameter of 30-60 nm on the Ag/Ti/PES substrate at $90^{\circ}C$ for 6 hours by hydrothermal method. The metal-semiconductor interface property was evaluated by using a HP 4145B Semiconductor Parameter Analyzer and the piezoelectric effect of the ZnO nanorods were evaluated by using an I-AFM. From the measured I-V characteristics, it was observed that ZnO-Ag and ZnO-Au metal-semiconductor interfaces showed an ohmic and a Schottky contact characteristics, respectively. ANSYS finite element simulation was performed in order to understand the power generation mechanism of the ZnO nanorods under applied external stress theoretically.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.362-366
• /
• 2018

Silicon carbide is widely used in power semiconductor devices owing to its high energy gap. In particular, Schottky barrier diode (SBD) and PiN diodes fabricated on 4H-SiC wafers are being applied to various fields such as power devices. The characteristics of SBD and PiN diodes can be extracted from C-V and I-V characteristics. The measured Schottky barrier height (SBH) was 1.23 eV in the temperature range of 298~473 K, and the average ideal factor is 1.17. The results show that the device with the Schottky contact is characterized by the theory of thermal emission. As the temperature increases, the parameters are changed and the Vth is shifted to lower voltages.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.13-18
• /
• 2000

We have fabricated LB ultra-thin films of maleate system by LB technique and evaluated the deposited status of LB ultra-thin films by I-V characteristics such as capacitance. It was found that the thickness of LB ultra-thin per layer is $27~30[{\AA}]$ by XRD. And, we have known that the conductivity along the horizontal direction of LB ultra-thin films was about $10^{-8}[S/cm]$, it corresponds to the semiconducting materials. Also, the I-V characteristics along the vertical direction of LB ultra-thin films was dominated by Schottky type current, the activation energy obtained by current-temperature characteristics was about 0.84[eV] and the conductivity was about $10^{-14}[S/cm]$, it corresponds to the insulator. And, the anisotropic conduction mechanism of the LB ultra-thin films in vertical direction and horizontal direction is determined by the hydrophilic group and the hydrophobic group in LB ultra-thin films. The above results are applicable to the semiconductor devices such as switching device, which function at the molecular level.