• Earthquakes and Structures
• /
• v.23 no.4
• /
• pp.385-401
• /
• 2022

Uncertainty quantification is the most important challenge in seismic fragility assessment of structures. The precision increment of the quantification method leads to reliable results but at the same time increases the computational costs and the latter will be so undesirable in cases such as reliability-based design optimization which includes numerous probabilistic seismic analyses. Accordingly, the authors' effort has been put on the development and validation of an approach that has reduced computational cost in seismic fragility assessment. In this regard, it is necessary to apply the appropriate methods for consideration of two categories of uncertainties consisting of uncertainties related to the ground motions and structural characteristics, separately. Also, cable-stayed bridges have been specifically selected because as a result of their complexity and the according time-consuming seismic analyses, reducing the computations corresponding to their fragility analyses is worthy of studying. To achieve this, the fragility assessment of three case studies is performed based on existing and proposed approaches, and a comparative study on the efficiency in the estimation of seismic responses. For this purpose, statistical validation is conducted on the seismic demand and fragility resulting from the mentioned approaches, and through a comprehensive interpretation, sufficient arguments for the acceptable errors of the proposed approach are presented. Finally, this study concludes that the combination of the Capacity Spectrum Method (CSM) and Uniform Design Sampling (UDS) in advanced proposed forms can provide adequate accuracy in seismic fragility estimation at a significantly reduced computational cost.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.114-119
• /
• 2004

By Article two of a Japanese urban park low, it prescribes park facilities strictly, and one of the classifications includes 'path and plaza'. In addition, it is assumed that we divide several kinds different paths of width by size of the park in a path design of a park with a textbook of park design in a trunk line path, the main path, a vice-path or a branch path and design it. From such a thing, in the path of an urban park, a line consists straight of fixed width, and it is most that one pattern is considered to be. Therefore, in modem urban park, a path and division of a plaza are lucid explanation. It is rare that the historical parks which generally former daimyo gardens are shown later, and is used as a kind of an urban park width of the path where was particularly posted in a strolling garden in that is fixed, and width waits straight for even a line and waits, and, for this, there is. As a result, it is a path and the situation that are hard to be distinguished of a plaza. Although there are a difference of design and a difference of pavement materials in modem landscape space when We watch road surface constitution of the path that We did that will let you wait, in gross We are uniform, and it is it with a result to be poor in change nature. From such an observation, this consideration compared traditional landscape space and modem landscape space with path width about two points of road surface constitution through the trial that a graph analyzed the actual place data which measured into and lectured on an ideal method of a park path from this.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.579-596
• /
• 2016

This paper describes a method of the refined plastic hinge approach in the framework of the higher-order element formulation that can efficaciously evaluate the limit state capacity of a whole reinforced concrete structural system using least number of element(s), whereas the traditional design of a reinforced concrete structure (i.e. AS3600; Eurocode 2) is member-based approach. Hence, in regard to the material nonlinearities, the efficient and economical cross-section analysis is provided to evaluate the element section capacity of non-uniform and arbitrary concrete section subjected to the interaction effects, which is helpful to formulate the refined plastic hinge method. In regard to the geometric nonlinearities, this paper relies on the higher-order element formulation with element load effect. Eventually, the load redistribution can be considered and make full use of the strength reserved owing to the redundancy of an indeterminate structure. And it is particularly true for the performance-based design of a structure under the extreme loads, while the uncertainty of the extreme load is great that the true behaviour of a whole structural system is important for the economical design approach, which is great superiority over the conservative optimal strength of an individual and isolated member based on traditional design (i.e. AS3600; Eurocode 2).

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.285-293
• /
• 2017

The effects of sulfate reducing bacteria (SRB) on the corrosion and scaling of the Q235 carbon steel has been investigated in the simulated sewage water and oil field gathering pipelines production water, using scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), and three-dimensional stereoscopic microscope. Results indicated that the concentration of SRB reached the maximum value on the ninth day in simulated sewage water with a large amount of scaling on the surface of specimen. In oil field gathering pipelines, a large amount of scaling and mineralization of mineral salts and thick deposition of extracellular polymeric substance (EPS) layers were also observed on the surface of specimen. The thickness of biofilm was about $245{\mu}m$ within 30 days. After adding microbicides, the thickness of corrosion products film was only up to $48-106{\mu}m$ within 30 days, suggesting that SRB could induce biomineralization. Under-deposit corrosion morphology was uniform in the absence of microbicides while local corrosion was observed in the presence of microbicides.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.723-725
• /
• 2003

The result of design and Partial fabrication of a 1 MVA single phase high temperature superconducting(HTS) transformer for power distributions are presented in this paper. The HTS windings are wound as double pancake windings which have advantages of uniform distribution of high voltage over the windings. the rated primary and secondary voltages are 22.9 kV and 6.6 kV respectively. Four HTS tapes are wound in parallel for secondary windings considering the rated currents of the transformer. The HTS windings will be cooled down to 65 K by natural convection of sub-cooled liquid nitrogen using a single-staged GM-cryocooler in order to make the stability of the HTS windings better. The iron core is designed as shell type and isolated from the liquid nitrogen by an FRP cryostat which have a room temperature bore. After the complete fabrication of the total HTS transformer system, performance test of the transformer will be carried out.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.215-220
• /
• 2012

Miniature ultrasonic and tactile sensors on Si substrate have been proposed, fabricated and characterized to detect objects for a dexterous robot. The ultrasonic sensor consists of piezoelectric PZT thin film on a Pt/Ti/$SiO_2$ and/or Si diaphragm fabricated using a micromachining technique; the ultrasonic sensor detects the piezoelectric voltage as an ultrasonic wave. The sensitivity has been enhanced by improving the device structure, and the resonant frequency in the array sensor has been equalized. Position detection has been carried out by using a sensor array with high sensitivity and uniform resonant frequency. The tactile sensor consists of four or three warped cantilevers which have NiCr or $Si:B^+$ piezoresistive layer for stress detection. Normal and shear stresses can be estimated by calculation using resistance changes of the piezoresitive layers on the cantilevers. Gripping state has been identified by using the tactile sensor which is installed on finger of a robot hand, and friction of objects has been measured by slipping the sensor.

• Steel and Composite Structures
• /
• v.51 no.6
• /
• pp.587-600
• /
• 2024

In order to investigate the seismic performance of regionally confined concrete circular column with trapezoid stirrups (TRCCC) under high axial compression ratio, the confinement mechanism of regionally confined concrete was analyzed. Three regionally confined concrete circular columns with trapezoid stirrups were designed, and low cyclic loading tests were conducted at three different axial compression ratios (0.9, 1.1, 1.25) to study the failure mode, hysteresis curve, skeleton curve, deformation capacity, stiffness degradation and energy dissipation capacity of the specimens. The results indicate that the form of regional confinement concrete provides more uniform confinement to the normal confinement, and the confinement efficiency at the edges is 1.4 times that of normal confined concrete. The ductility coefficients of the specimens were all greater than 3 under high axial compression ratios, and the stiffness and horizontal bearing capacity increased with the increase of axial compression ratio. Therefore, it is recommended that the code of design specifications can appropriately relax the axial compression ratio limit for TRCCC. Finally, the spacing between stirrups of TRCCC was analyzed using ABAQUS software. The results showed that as the spacing between the stirrups decreased, the cracking load and peak load of TRCCC increased continuously, but the rate of increase decreases.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.181-189
• /
• 2007

This study aims to conduct research into the property of costumeplay that has been established with our unique characteristics despite the critics from the existing generation, and the cospre style preferred by costumeplayers. The research methods include literature study, existing research, and a survey targeting costumeplayers who make costumes upon order or borrow costumes on websites. The findings are as follows. 1. From the results of the survey, 77% of the participants in the costumeplay were secondary school students, 16% were college students, and 5% were primary school students. 2. The distribution of the residences of the costumeplayers was found to be mostly centered in two areas including Seoul/Gyeonggi and Gyeongsang/Busan, which were 39% and 37% each. This is probably because Seoul Comic and Busan Comic were regularly taking place, and these are relatively economically affluent areas and locations where the rapid exchange of Japanese culture occurs. 3. For the cospre style preferred by costumeplayers, 57% of respondents preferred costumes for reviving characters, 18% of them for fan-cospre and 14% of them for reviving a character and creating new characters. Costumeplayers preferred cospre costumes for reviving characters rather than for creating new characters. 4. Most respondents preferred a character-oriented design, posting 31.9%. Next, 17.5% of them selected the Lolita look This is probably because the Lolita look which is much favored in the latest fashion trends affects them, and the rest of the respondents preferred a fantasy/SF group, visual, uniform, and maid look, in order. 5. For costs required for costumeplay for 1 time, 39% of respondents spent about KRW $100,000{\sim}150,000$, and 24% of them about KRW $150,000{\sim}200,000$. However, for buying accessories or small items, over 50% of them spent KRW $30,000{\sim}40,000$.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.706-718
• /
• 2014

Ideology which symbolizes the belief system about the order of human society represents itself in a concrete form through dress which reflects material and conceptual world. In the early 1960s Korea, where a civil revolution and a military coup took place, good examples of dress representing ideology could be found. This study investigates the dress representing ideology of the period, and examines its manifestation and aspect of transition. Literature survey and case study were conducted. The following results were obtained: First, dress representing ideology was symbolically verifying its differences and was changing with the course of time. There were the flow going down from the government, and the flow going up from the movement of the civilian. Through this process, design elements of ideological dress were combined in a dialectic way to form a new representational dress such as Jaegunbok. Second, costly and luxurious clothes meant a tool to rule over people, and the opposition was uniform meaning equality. In 1960 Korea, black waves of school uniforms appeared to lead the social change. A year later, the military government seized power in a 5.16 coup and it enforced uniform upon every people to achieve equal austerity and modernized spirit. Lastly, cotton, which was originated from Gandhi's movement in India, was symbolizing nationalism till the early 1960s in Korea meaning the funding own development with own resources.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.161-171
• /
• 2014

In this paper the flow dynamics of the flue gas equipment in the desulfurization system was numerically analyzed by simulating the problems for the turbulent and combustion flow from Induced Draft Fan(I.D.Fan) outlet to Booster Up Fan(B.U.Fan) inlet using the commercial CFD software of CFD-ACE+ in CFDRC company for Computational Fluid Dynamic Analysis. The guide vane of this section was examined for the minimum pressure loss and the uniform flow dynamic to B.U.Fan with the proper velocity from I.D,Fan exit to B,U,Fan inlet section at the boiler both the maximum continuous rating and the design base. The guide vanes at I,D.Fan outlet and B.U.Fan inlet were removed and modified by numerical simulation of the CFD analysis. The flue gas at the system had the less pressure loss and the uniform flow dynamics of the flow velocity and flow line by comparing with the old design equipment.