• 한국안전학회지
• /
• 제28권5호
• /
• pp.71-77
• /
• 2013

This Study aims at investigating actual condition on attending school road of children and analyzing empirically the characteristics of cognition and the influence of safety on school road. This study findings are as follows : 1) Walking alone to go to school is the highest rates among Commuting Mode, and Commuting distance to school is nearly doubles than range of school zone(300 m). 2) Among characteristics of urban spatial structure affecting on influence classify safety of school road, 'Commuting Distance' has been drawn to most influential variable. Especially, there are 4 types classified by commuting distance and it became obvious that the longer the distance, the lower the safety score(under 127 m=76.9 points, Over 451 m=58.3 points). 3) As a result of investigating the influence of Safety on attending school road, Vehicle commuting speed urder 127 m as internal of school zone, and Walking and crossing convenience over 451 m as external of school zone have a lot of influence on safety cognition on school road. Therefore Safety on school road should be considering the commuting distance to school among surrounding characteristics, needed for improvement plan and program based on real safety cognition of children.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.559-577
• /
• 2016

There are many theoretical analyses and experimental studies of the hydrodynamics for the tension leg platform (TLP) of a floating wind turbine. However, there has been little research on the arrangement of the TLP's internal structure. In this study, a TLP model and a 5-MW wind turbine model as proposed by the Minstitute of Technology and the National Renewable Energy Laboratory have been adopted, respectively, to comprehensively analyze wind effects and wave and current combinations. The external additional coupling loads on the TLP and the effects of the loads on variables of the internal structure have been calculated. The study investigates preliminary layout parameters-namely, the thickness of the tension leg body, the contact mode of the top tower on the tension leg, the internal stiffening arrangement, and the formation of the spoke structure-and conducts sensitivity analyses of the TLP internal structure. Stress is found to be at a maximum at the top of the tension leg structure and the maximum stress has low sensitivity to the load application point. Different methods of reducing maximum stress have been researched and analyzed, and the effectiveness of these methods is analyzed. Filling of the spoke structure with concrete is discussed. Since the TLP structure for offshore wind power is still under early exploration, arrangements and the configuration of the internal structure, exploration and improvements are ongoing. With regard to its research and analysis process, this paper aims to guide future applications of tension leg structures for floating wind turbine.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.140-140
• /
• 2009

The Metal-ferroelectric-semiconductor (MFS) structure has superior advantages such as high density integration and non-destructive read-out operation. However, to obtain the desired electrical characteristics of an MFS structure is difficult because of interfacial reactions between ferroelectric thin film and Si substrate. As an alternative solution, the MFS structure with buffer insulating layer, i.e. metal-ferroelectric-insulator-semiconductor (MFIS), has been proposed to improve the interfacial properties. Insulators investigated as a buffer insulator in a MFIS structure, include $Ta_2O_5$, $HfO_2$, and $ZrO_2$ which are mainly high-k dielectrics. In this study, we prepared the Dy-doped $La_2O_3$ solution buffer layer as an insulator. To form a Dy-doped $La_2O_3$ buffer layer, the solution was spin-coated on p-type Si(100) wafer. The coated Dy-doped $La_2O_3$ films were annealed at various temperatures by rapid thermal annealing (RTA). To evaluate electrical properties, Au electrodes were thermally evaporated onto the surface of the samples. Finally, we observed the surface morphology and crystallization quality of the Dy-doped $La_2O_3$ on Si using atomic force microscopy (AFM) and x-ray diffractometer (XRD), respectively. To evaluate electrical properties, the capacitance-voltage (C-V) and current density-voltage (J-V) characteristics of Au/Dy-doped La2O3/Si structure were measured.

• 한국항공우주학회지
• /
• 제42권8호
• /
• pp.701-706
• /
• 2014

최근 인공위성 연구는 "Faster, Smaller, Better, Cheaper"라는 슬로건 하에 나노급, 마이크로급 인공위성 개발, 복수위성 발사 등에 대한 연구가 활발히 진행되고 있다. 광학구조체는 인공위성에서 대부분의 비율을 차지하며, 이를 축소하기 위한 방안으로 광학구조체에 전개 메커니즘을 접목시킨 전개형 광학구조체에 대한 연구가 각광받고 있다. 본 논문에서는 기존 고정형 광학구조체의 요구조건을 바탕으로 전개형 광학구조체 전개 시 정렬 정밀도를 제안하고, 이 정밀도를 만족시킬 수 있는 전개 메커니즘 후보를 제안하였다. 또한 기구학적 해석을 수행하여, 위성의 광학성능에 영향을 미치는 미러 사이의 tilt, de-space, de-center중, 기구의 입력 오차에 의하여 발생될 수 있는 기구장치의 de-space 정밀도를 평가하였다.

• 한국가구학회지
• /
• 제27권3호
• /
• pp.246-252
• /
• 2016

From 2000s, modular construction has gained more attention due to many advantages such as reduction of duration, recycling. The modular structure is being used for urban regeneration recently. However, even though most facilities in the modular structures which are used as urban regeneration building are commercial spaces, exhibition spaces, eating and drinking spaces, there are lack of natural or mechanical ventilation systems. Also, there are relatively limited spaces on modular structure characteristic. Therefore, indoor environment performance of four buildings, which are performed as urban regeneration in Seoul, was evaluated by HCHO and $CO_2$ emissions. Consequently, the HCHO and $CO_2$ emissions of the commercial and exhibition spaces were confirmed that can influence on health of occupants. Therefore, the urban regeneration modular structure needs to add local ventilation systems for improvement of indoor air quality to more healthy and comfortable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권3호
• /
• pp.792-812
• /
• 2022

Multi-agent systems often need to achieve the goal of learning more effectively for a task through coordination. Although the introduction of deep learning has addressed the state space problems, multi-agent learning remains infeasible because of the joint action spaces. Large-scale joint action spaces can be sparse according to implicit or explicit coordination structure, which can ensure reasonable coordination action through the coordination structure. In general, the multi-agent system is dynamic, which makes the relations among agents and the coordination structure are dynamic. Therefore, the explicit coordination structure can better represent the coordinative relationship among agents and achieve better coordination between agents. Inspired by the maximization of social group utility, we dynamically construct a factor graph as an explicit coordination structure to express the coordinative relationship according to the utility among agents and estimate the joint action values based on the local utility transfer among factor graphs. We present the application of such techniques in the scenario of multiple intelligent vehicle systems, where state space and action space are a problem and have too many interactions among agents. The results on the multiple intelligent vehicle systems demonstrate the efficiency and effectiveness of our proposed methods.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1175-1184
• /
• 2022

The pore structure of uranium-bearing sandstone is one of the critical factors that affect the uranium leaching performance. In this article, uranium-bearing sandstone from the Yili Basin, Xinjiang, China, was taken as the research object. The fractal characteristics of the pore structure of the uranium-bearing sandstone were studied using mercury intrusion experiments and fractal theory, and the fractal dimension of the uranium-bearing sandstone was calculated. In addition, the effect of the fractal characteristics of the pore structure of the uranium-bearing sandstone on the uranium leaching kinetics was studied. Then, the kinetics was analyzed using a shrinking nuclear model, and it was determined that the rate of uranium leaching is mainly controlled by the diffusion reaction, and the dissolution rate constant (K) is linearly related to the pore specific surface fractal dimension (D_S) and the pore volume fractal dimension (D_V). Eventually, fractal kinetic models for predicting the in-situ leaching kinetics were established using the unreacted shrinking core model, and the linear relationship between the fractal dimension of the sample's pore structure and the dissolution rate during the leaching was fitted.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.289-304
• /
• 2024

The seismic performance of traditional steel frame-shear wall structures was significantly improved by the application of self-centering steel-reinforced concrete (SRC) wall-panel structures in the steel frames. This novel resilience functionality can rapidly restore the structure after an earthquake. The presented steel frame with steel-reinforced concrete self-centering wall-panel structures (SF-SCW) was validated, indicating its excellent seismic performance. The seismic design method based on bear capacity cannot correctly predict the elastic-plastic performance of the structure, especially certain weak floors that might be caused by a major fracture. A four-level seismic performance index, including intact function, continued utilization, life safety, and near-collapse, was established to achieve the ideal failure mode. The seismic design method, based on structural displacement, was proposed by considering performance objectives of the different seismic action levels. The pushover analysis of a six-floor SF-SCW structure was carried out under the proposed design method and the results showed that this six-floor structure could achieve the predicted failure mode.

• 대한약침학회지
• /
• 제7권3호
• /
• pp.73-76
• /
• 2004

We report the new threadlike structures outside the blood vessels of mice. For this, we developed an in-situ searching method of the structure by vital staining with the dye of acridine orange and using a fluorescent stereomicroscope designed specifically for this purpose. We consider that the newly found threadlike structure might be rediscovery of the extra-vascular Bonghan duct which was reported in 1963 by Bonghan Kim.

• 센서학회지
• /
• 제22권4호
• /
• pp.256-261
• /
• 2013

This paper presents an extension of the dynamic range in a complementary metal-oxide-semiconductor (CMOS) active pixel sensor (APS) using a stacked photodiode and feedback structure. The proposed APS is composed of two additional MOSFETs and stacked P+/N-well/P-sub photodiodes as compared with a conventional APS. Using the proposed technique, the sensor can improve the spectral response and dynamic range. The spectral response is improved using an additional stacked P+/N-well photodiode, and the dynamic range is increased using the feedback structure. Although the size of the pixel is slightly larger than that of a conventional three-transistor APS, control of the dynamic range is much easier than that of the conventional methods using the feedback structure. The simulation and measurement results for the proposed APS demonstrate a wide dynamic range feature. The maximum dynamic range of the proposed sensor is greater than 103 dB. The designed circuit is fabricated by the $0.35-{\mu}m$ 2-poly 4-metal standard CMOS process, and its characteristics are evaluated.