• Journal of Korean Society of Forest Science
• /
• v.99 no.2
• /
• pp.197-203
• /
• 2010

The data of average temperature, average relative humidity, precipitation and average wind speed were collected from 674 meteorological stations in China. A specific procedure that processes original data into a new data format needed in forest fire danger rating forecast system of China was introduced systematically, and the feasibility of this method was validated in this paper. In addition, a set of meteorological data processing software was constructed by the secondary development of GIS in order to realize automation of processing data for the system. Results showed that the approach preformed well in handling temperature, average relative humidity and average wind speed, and the processing effect of precipitation was acceptable. Moreover, the automated procedure could be achieved by GIS and the working efficiency was about 3 times as much as that of manual handling. The informationization level of processing meteorological data was greatly enhanced.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.33-39
• /
• 2004

Four phenolic compounds were isolated from the wood and bark of Magnolia sieboldii. The structures were determined as : costunolide (I), syringin (II), 1, 2-dihydroxyxanthone (III), and vanillic acid (IV), respectively, on the basis of spectroscopic data.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.6
• /
• pp.43-49
• /
• 2004

Three flavonoids, quercetin, taxifolin, and kaempferol were isolated from the woods of Liriodendron tulipifera. Their structures were determined by spectral analysis. Based on 1, l-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity method, the antioxidative activities of three isolated compounds and their acetates were measured in order to search for natural antioxidants. The IC₅₀ of quercetin (1), taxifolin (2), and kaempferol (3) were 3.6, 3.9, and 4.1 ㎍/㎖, respectively.

• Korean Journal of Remote Sensing
• /
• v.23 no.3
• /
• pp.153-160
• /
• 2007

Forest cover density studies using high resolution satellite data and object oriented classification are limited in India. This article focuses on the potential use of QuickBird satellite data and object oriented classification in forest density mapping. In this study, the high-resolution satellite data was classified based on NDVI/pixel based and object oriented classification methods and results were compared. The QuickBird satellite data was found to be suitable in forest density mapping. Object oriented classification was superior than the NDVI/pixel based classification. The Object oriented classification method classified all the density classes of forest (dense, open, degraded and bare soil) with higher producer and user accuracies and with more kappa statistics value compared to pixel based method. The overall classification accuracy and Kappa statistics values of the object oriented classification were 83.33% and 0.77 respectively, which were higher than the pixel based classification (68%, 0.56 respectively). According to the Z statistics, the results of these two classifications were significantly different at 95% confidence level.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.473-481
• /
• 2007

Joint Forest Management(JFM) is a concept of developing partnerships between fringe forest user groups and the Forest Department(FD) on the basis of mutual trust and jointly defined roles and responsibilities with regard to forest protection and development. In India, JFM was started during 1992 and it was implemented in many states. However success rate of JFM activity was not promising. Though there are many factors attributed to the failures, one of the main factors is the JFM site. This paper deals with the significant ground works to be done before planning for JFM using recent technologies such as remote sensing(RS) and Geographic Information System(GIS). Also it deals with the advantages of weighted overlay analysis in selecting suitable sites for JFM taking into consideration the various criteria. As a result of weighted overlay analysis, there were four types of suitability classes viz., less, moderate, highly and un-suitable. The moderately suitable class occupied maximum area(13209.64 ha) than less and highly suitable classes. If JFM is implemented on the suitability area, then the failure could be avoided in the future.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.661-667
• /
• 2014

Background Tissue expansion is an effective and valuable technique for the reconstruction of large skin lesions and scars. This study aimed to evaluate the applicability and safety of a newly designed skin expanding bioreactor system for maximizing the graft area and minimizing the donor site area. Methods A computer-controlled biaxial skin bioreactor system was used to expand skin in two directions while the culture media was changed daily. The aim was to achieve an expansion speed that enabled the skin to reach twice its original area in two weeks or less. Skin expansion and subsequent grafting were performed for 10 patients, and each patient was followed for 6 months postoperatively for clinical evaluation. Scar evaluation was performed through visual assessment and by using photos. Results The average skin expansion rate was $10.54%{\pm}6.25%$; take rate, $88.89%{\pm}11.39%$; and contraction rate, $4.2%{\pm}2.28%$ after 6 months. Evaluation of the donor and recipient sites by medical specialists resulted in an average score of 3.5 (out of a potential maximum of 5) at 3 months, and 3.9 at 6 months. The average score for patient satisfaction of the donor site was 6.2 (out of a potential maximum of 10), and an average score of 5.2 was noted for the recipient site. Histological examination performed before and after the skin expansion revealed an increase in porosity of the dermal layer. Conclusions This study confirmed the safety and applicability of the in vitro skin bioreactor, and further studies are needed to develop methods for increasing the skin expansion rate.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.48-58
• /
• 2003

This study was carried out to select proper species for early stage replantation in granite forest road cut-slope. From one to thirteen year elapsed forest roads in five regional areas of Chungcheong-do and Kyungsangbuk-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.5%, 0.02%, 10%, and above 1.2g/$cm^3$, respectively. The environmental factors affecting distribution of species in the granite forest road were the elapsed year, elevation, cut-slope aspect, and cut-slope. Sowing plants of Dactylis glomerata, Lolium perenne, and Eragrostis curvula were found in the early stage of forest road-cut. Annual herbs of Youngia denticulata, Erigeron annuus, etc. were found in the 2-3 years elasped forest road-cut. Perennial herbs of Artemisia princeps var. orientalis, Miscanthus sinensis, etc., parachute woody plants of Weigela subsessilis, Pinus densiflora, etc., and gravitative trees of Prunus sargentii, Lindera obtusiloba, Quercus sp., etc. were found in the forest road cut-slope after 3 years of road-cut. Leguma of Lespedeza cureata, Amorpha fruticosa, Lespedeza bicolor, Pueraria thunbergiana, Albizzia julibrissin, etc., herbs of Artemisia keiskeana, Artemisia princeps var. orientalis, Miscanthus sinensis, etc., and woody plants of Rubus crataegifolius, Weigela subsessilis, Zanthoxylum schinifolium, Pinus densiflora, etc. were considered as proper species for replantation in granite forest road cut-slope.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.635-645
• /
• 2023

The purpose of this study is to establish a linkage between local forest human resources policies and the analysis of forest resource conditions in Gyeongsangbuk-do. In particular, the study aims to gather insights from students enrolled local formal education institutions through a demand survey and their opinions. These findings would serve as basic data for the formulation of medium- and long-term policies. According to the results of the analysis, all surveyed groups expressed a desire to pursue careers, entrepreneurship, or further school education based on their forestry majors. Among, the most important needs identified for local human resources, receiving training related to field practice and access to information emerged as paramount. In addition, it was observed that educational programs were conducted on weekends and during school vacations, with integration into the school curriculum to ensure participants not only benefit from self-development but also receive administrative support. A notable observation in the survey results was the absence of a network among forest professionals, signifying a key weakness within the forest sector in Gyeongsangbuk-do. The results of this study hold significant value in terms of analyzing and sharing the educational preferences of forest human resources in Gyeongsangbuk-do, thereby serving as basic research data for proposing policies. In the future, by expanding the scope to include case studies and forest human resource preference analyses through cooperation with other local governments and institutions, the research can contribute to the establishment of national-level policies for forest human resources on a broader scale.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.1-9
• /
• 2022

This study analyzed the anticipated supply-and-demand of forest biomass energy (through wood pellets) until 2050, in South Korea. Comparing the utilization rates of forest resources of five countries (United Kingdom, Germany, Finland, Japan, and S. Korea), it was found that S. Korea does not nearly utilize its forest resources for energy purposes. The total demand for wood pellets in S. Korea (based on a power generation efficiency of 38%) was predicted to be 3,629 and 4,371 thousand tons in 2034 and 2050, respectively. The anticipated total wood pellet power generation ratio to target power consumption is 1.13% (5,745 GWh), 1.17% (6,336 GWh), and 1.25% (7,631 GWh) in 2020, 2030, and 2050, respectively. Low value-added forest residues left unattended in forests are called "Unused Forest Biomass" in S. Korea. From the analysis, the total annual potential amount of raw material, sustainably collectible amount, and available amount of wood pellet in 2050 were estimated to be 6,877, 4,814, and 3,370 thousand tons, respectively. The rate of contribution to Nationally Determined Contributions was up to 0.64%. Through this study, the authors found that forest biomass energy will contribute to a carbon neutral society in the near future at the national level.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.235-241
• /
• 2011

Recently, as people have become more interested in health issues, their demand on forest trails for bush walking exercise has increased. The purpose of the study is to select barrier factors into forest trail for disabled using wheelchairs. As a result this, it has selected 31 barrier factors through the Delphi method. Of all the these factors, the information board of forest trails, showing the location of the trails, has indicated the highest score of importance at 4.50. Next, securing hiker' walking safety space has indicated an importance level of 4.44; both the slope of forest trails and the height of obstacles have indicated an importance level of 4.38; and the effective width of forest trails has indicated the highest score of importance level of 4.33. From these indicated levels of importance, the respondents of the Delphi method consider the safety of users of forest trail' as the most important factor while the physically disables are hiking. That is why these factors have resulted in acquiring relatively higher values.