• Journal of Veterinary Clinics
• /
• v.26 no.2
• /
• pp.144-149
• /
• 2009

Chondrocytes and synovial fluid derived markers are used to monitor for osteoarthritis(OA). Specific inhibitors, known as tissue inhibitors of metalloproteinases(TIMP), regulate the proteolytic activity of matrix metalloproteinases(MMP). This study investigated whether MMP and TIMP levels were altered in synovial fluid and cartilage following the experimental induction of OA in canines. Twenty mature beagle dogs underwent a unilateral surgical transection of the cranial cruciate ligament and the medial collateral ligament as well as a medial meniscectomy. Matrix metalloproteinase-2 and MMP-9 levels were assayed using Western blot and TIMP-2 levels were measured with enzyme-linked immunosorbent assays four weeks after OA induction. Increased MMP-2 expression was observed in chondrocytes isolated from cartilage following OA induction, but MMP-9 expression decreased. Matrix metalloproteinase-2 and MMP-9 levels in synovial fluid from the OA induced joint significantly increased compared to those of the sham group. Tissue inhibitors of metalloproteinase-2 concentrations were higher in chondrocytes from the OA cartilage, yet TIMP-2 remained lower in the synovial fluid of OA. This suggests the elevated release of MMP-9 over MMP-2 into the synovial fluid following the cartilage degradation-related death of chondrocytes after OA. Osteoarthritis can be further deteriorated by increased MMP activity in the synovial fluid because TIMP-2 exist low concentration into the extracellular matrix. As a result, MMP activity, particularly MMP-9 activity, can be useful as a biomarker in diagnosing and monitoring the early stages of canine OA.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1305-1313
• /
• 2019

Licochalcone (LC), isolated from the roots of Glycyrrhiza inflata has multiple pharmacological effects including anti-inflammatory and anti-tumor activities. To date, Licochalcone C (LCC) has induced apoptosis and inhibited cell proliferation in oral and bladder cancer cells, but lung cancer has not yet been studied. In addition, no study reported LCC-induced autophagy in cancer until now. The present study was designed to investigate the effect of LCC on gefitinib-sensitive and -resistant lung cancer cells and elucidate the mechanism of its action. The 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide assay data showed that LCC significantly inhibited cell viability in non-small cell lung cancer (NSCLC) HCC827 (gefitinib-sensitive) and HCC827GR (gefitinib-resistant) cell lines. Interestingly, Annexin V/7-aminoactinomycin D double staining and cell cycle analysis showed an apoptosis rate within about 20% at the highest concentration of LCC. LCC induced G2/M arrest by reducing the expression of the cell cycle G2/M related proteins cyclin B1 and cdc2 in NSCLC cell lines. Treatment of LCC also induced autophagy by increasing the expression of the autophagy marker protein microtubule-associated protein 1 light chain 3 (LC3) and the protein autophagy-related gene 5 involved in the autophagy process. In addition, LCC increased the production of reactive oxygen species (ROS), and the cell viability was partially restored by treatment with the ROS inhibitor N-acetyl-L-cysteine. In western blotting analysis, the expression of cdc2 was increased and LC3 was decreased by the simultaneous treatment of NAC and LCC. These results indicate that LCC may contribute to anti-tumor effects by inducing ROS-dependent G2/M arrest and autophagy in NSCLC. In conclusion, LCC treatment may be useful as a potential therapeutic agent against NSCLC.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.3
• /
• pp.155-161
• /
• 2001

This study was carried out to investigate cytotoxicity of paraquat or bentazone on NIH 3T3 fibroblasts, toxicity of paraquat or bentazone, and compensatory effects of 3-Methylcholanthrene(3-MC) on the rat liver. In order to MTT assay, the $5.0{\times}10^4$ cell/mL of NIH 3T3 fibroblast in each well of 24 multidish were cultured. After 24 hours, the cells were treated with solution of paraquat or bentazone(1, 25, 50, 100 ${\mu}M$ respectively). After the NIH 3T3 fibroblast of all groups were cultured in same condition for 48 hours. MTT assay were performed to evaluate the cytotoxicity of cell organelles. Paraquat or bentazone $MTT_{50}$ were 1668.97 ${\mu}M$ and 1506.97 ${\mu}M$, respectively. These $IC_{50}$ of paraquat or bentazone were decided low cytotoxicity by Borenfreund. In order to observe the toxicity and compensatory effects of paraquat or bentazone on the rat liver, Sprague-Dawley male rats were used as experimental animals and divided into paraquat or bentazone only treated group and simultaneous application group of paraquat or bentazone and 3-MC. At 30 min and 1, 3, 6, 12, 24, 48 and 96 hrs interval after each treatment, the animals were sacrificed by decapitation and liver were immediately removed, immersed in fixatives, and processed with routine method for light microscopic study. Paraffin sections were stained with H-E, PAM and Best Carmine. Under the light microscope, degenerative changes of hepatic lobules were frequently observed in portal area from 3 hrs after paraquat or bentazone treatment. All hepatic cells were induced degenerative change at 12 hrs and more severe degenerative change at 48 hrs after paraquat or bentazone treatment. Especially, hepatic cells of bentazone only treated group were distinctly showed pyknotic. Glycogen granules were increased in portal area at 3 hrs, all hepatic cells at 12 hrs and remarkably increased at 48 hrs after paraquat or bentazone treated group. But hepatic cells of bentazone only treated group were regeneration at 48 hrs from portal area and glycogen granules of hepatic cells of paraquat or bentazone and 3-MC combination treated group showed in central area only at 48 hrs. The results indicate that 3-MC may be decrease paraquat or bentazone cytotoxicity on the rat liver.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.815-824
• /
• 2015

This study aims to figure out the current state of health insurance education provided to dentists and personnel in charge of insurance claim as well as the effects of experiences in education on their knowledge of health insurance standard and actual application. As a result of analysis on 100 data sheets related to dentistry and 100 data sheets related to personnel in charge of insurance claim (a total of 200 data sheets), following results were generated. Insurance claim personnels showed higher score than dentist in knowledge of health insurance standard and it was significant statistically. Knowledge of insurance claim personnel showed significant differences in educational experiences, in health insurance for the latest three years and average hours of education per session whereas that of dentists did not indicate any significant differences. The level of practical application of dentists was significantly different (p<0.05) according to experiences in insurance claim, and that of insurance claim personnel significantly varied (p<0.05) depending on age, experiences of insurance education and average hours of education. The longer average hours of education, the higher level of practical application. Experiences of insurance education turned out to affect on the knowledge of health insurance standard significantly (p<0.05) on the part of dentists and insurance claim personnel, and the level of experiences in insurance claim and knowledge of health insurance standard on the part of dentists and insurance claim personnel turned out to affect on practical application significantly (p<0.001). Judging from the result, continuous education needs to be conducted in order to enable dentists and insurance claim personnel to maintain the level of knowledge about health insurance and practical application.

• Journal of dental hygiene science
• /
• v.16 no.5
• /
• pp.393-399
• /
• 2016

The objective of this study was to realize research demands by gathering the research agenda from the Korean Dental Hygienists Association and affiliated groups through a Delphi survey. The study subjects were the heads of eight groups. The Delphi survey was conducted by e-mail after a researcher explained the objective of the study to the heads. The research agenda was classified according to the Korean dental hygiene academic classification and the National Dental Hygiene Research Agenda classification. To compare the number of research agendas according to classification among the groups, we conducted a chi-squared test by using IBM SPSS 20.0. In total, 316 agendas were submitted. According to the Korean dental hygiene academic classification, there was a significant difference among the groups, and the agendas associated with clinical dental hygiene (36.7%) were the best. According to the National Dental Hygiene Research Agenda classification, there was no significant difference and the agendas associated with health promotion and disease prevention (27.8%) were the best. In conclusion, the Korean Dental Hygienists Association and affiliated groups demanded similar research agendas, corresponding to the purpose of each establishment. However, the groups did not seem to show unique characteristics according to the purpose of each establishment. In other words, the groups should corroborate such characteristics and suggest a corresponding agenda to establish specific areas of research in dental hygiene. Also, dental hygiene researchers should mark the academic classification of the studies they want to submit.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1152-1158
• /
• 2009

For the toxicological pathologic study of amanita muscaria, we have investigated single and repeated dose toxicity in Sprague-Dawley (SD) rats. Single dose toxicity study was identified as catalepsy, incline and tail pinch methods (control 0 mg/kg, low 3.3 mg/kg, middle 16.5 mg/kg, high 33.0 mg/kg). Repeated dose toxicity study was carried out in blood tests, serum tests and histopathological methods. Neurotoxicity - muscle paralysis, and convulsion and loss of movement - was observed at 33.0 mg/kg group in the single dose toxicity study. Dysfunction of liver and kidney were shown in the repeated oral administration of the amanita muscaria at 3${\sim}$4 weeks. Serum chemistry results revealed a marked increase of LDH [Lactate Dehydrogenase (3181.5 IU/L; normal 230-460 IU/l)], ALT [Alanine transaminase (124.0 IU/l; normal <40 IU/l)] but the kidney was normal. Histopathological results show interstitial edema and tubular epithelial necrosis in the kidney. These results suggest that amanita muscaria has a neurotoxic effect and causes dysfunction of liver and kidney in the SD rat.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.93-102
• /
• 2011

Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.219-225
• /
• 2010

The purpose of this study was to examine the patients' knowledge and expectation of dental implants and to provide effective consulting and accurate information on implants to them. To that end, between March 23, 2008 and June 5, 2008, patients who were visiting dental clinics (hospitals) in Seoul, Gyeonggi-do, and Incheon areas were surveyed. 84.7% of subjects said that they recognized implants, and the largest number of them (26.7%) of subjects came to know via friends. According to an analysis of subjects' knowledge of the dental implant operation, the maximum value was 4.06, and the minimum value was 3.05. The opinion value on the need to have regular examination after the implant operation was highest at 4.06. Regarding expectation over the implant operation, the maximum value was 4.42, and the minimum value was 1.78. The opinion value on considering the implant operation capability the most important was the highest at 4.42. The relationship between the knowledge of and expectation over implants was significant. By gender, females had a significantly higher level of knowledge than males. Regarding preference, females scored 3.27 points, and males scored 3.23 points. By occupation, professionals earned the highest score of 3.55 in knowledge, and professionals earned the highest score of 3.31 in expectation. According to an analysis of the relation between variables of knowledge of and variables of expectation over implants, the correlation coefficient (r) between the two factors was 0.362, indicating a positive relevancy(+)(p<.01).

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.55-60
• /
• 2010

Purpose: The shrinkage of dental resin cement may cause several clinical problems such as distortion that may jeopardize the accurate fit to the prepared tooth and internal stress within the restorations. It is important to know the polymerization shrinkage-strain of dental resin cement to reduce clinical complications. The purpose of this study was to investigate the polymerization shrinkage-strain kinetics of six commercially available dental resin cements. Material and methods: Three self-cure resin cements (Fujicem, Superbond, M-bond) and three dual-cure resin cements (Maxcem, Panavia-F, Variolink II) were investigated. Time dependent polymerization shrinkage-strain kinetics of the materials were measured by the Bonded-disk method as a function of time at $23^{\circ}C$, with values particularly noted at 1, 5, 10, 30, 60, 120 min after mixing. Five recordings were taken for each materials. The data were analyzed with one-way ANOVA and Scheffe post hoc test at the significance level of 0.05. Results: Polymerization shrinkage-strain values were 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90% for Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II, respectively at 120 minutes after the start of mixing. Panavia F exhibited maximum polymerization shrinkage-strain values, but Superbond showed minimum polymerization shrinkage-strain values among the investigated materials (P < .05). There was no significant differences of shrinkage-strain value between Maxcem and M bond at 120 minutes after the start of mixing (P > .05). Most shrinkage of the resin cement materials investigated occurred in the first 30 minutes after the start of mixing. Conclusion: The onset of polymerization shrinkage of self-cure resin cements was slower than that of dual-cure resin cements after mixing, but the net shrinkage strain values of self-cure resin cements was higher than that of dual-cure resin cements at 120 minutes after mixing. Most shrinkage of the dental resin cements occurred in the first 30 minutes after mixing.