• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.673-680
• /
• 1997

금속 표면 처리 공정 및 체련 공정 중에 발생하는 폐황산의 중화처리에는 NaOH,$Na_2CO_3,CaO,Ca(OH)_2,CaCO_3$ 등이 널리 사용되고 있다. 그러나, 이러한 중화제의 사용시 드는 높은 처리비용으로 인해, 본 연구에서는 포항제철(주)의 소성 공장으로부터 나오는 슬러지 와 스테인레스 제조 꽁청에서 나오는 dust의 활용을 모색하였으며, 이 때 나오는 석고부산물의 결정 및 재활용 연구를 수행하였다. 본 연구 결과, 슬러지를 중화제로 사용할 경우 캉산 영역 ( (pH < 2)에서는 소성 후 수화시킨 것을 사용한 후 약산영역(pH>2)에서 순수한 슬러지를 사용 하여 중화시키는 방법이 효과적얼 것으로 판단되었으며, 이 때 생성되는 석고 부산물의 화학 분석 결과는 석고원료 품질규격에 부합됨을 확인할 수 있어 이 제조법에 의한 석고원료 공급부 족현상 해결에 도움을 줄 수 있을 것으로 기대된다. 또한, 스테인레스 제조 공청에서 나오는 d dust를 이용해 순수한 황산 빛 폐황산의 중화 과정에서 생성되는 석고의 상 빛 형상을 비교한 결과, 순수한 황산의 경우 높은 반응성과 반응온도로 인해 구형의 응집체형 석고가 생성되고, 폐황산의 경우 순수한 황산에 비해 낮은 반응성으로 인해 휘스커형 석고가 생성됨을 전자현미 경 사진으로부터 확인할 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제14권1호
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2007년도 추계학술대회 논문집
• /
• pp.540-541
• /
• 2007

See Full Text

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1361-1366
• /
• 2009

This study is to see the internal flow for the plasma cutting fume collector. Plasma cutters are widely used in the canning industry and Fume cause the device because it will affect the performance of the design of dust collector. Therefore, to determine the distribution of the internal flow using CFD and Solver was used for calculated with commercial CFD code STAR-CCM+. The results show that design of chamber was incorrect after passed the filter for exhaust to the fan. And the location of the duct to the influx of dust collector and the design was incorrect. In addition, an array of filter was also inappropriate. As a result, present fume collector need to improvement.

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.345-352
• /
• 2012

1980년대 초 Sherwood교수가 한국에 와 있으면 당시 탄광의 호흡성먼지의 농도를 측정한 자료를 활용하여 로그-정규분포에 대한 분석을 한 자료이다. 탄광의 건조상태에서 농도는 물을 뿌리면서 하는 작업에 비해 매우 높은 수준을 보인다. 건조한 탄광에서 기하평균농도는 $26.1mg/m^{3}$이었고 물을 뿌린 탄광에서는 $4.1mg/m^{3}$이었다. 이는 매우 높은 수준이었음을 알 수 있다. 각 탄갱에서의 농도는 로그정규분포를 하였고 석탄을 접하는 탄갱에서의 농도는 $1.65mg/m^{3}$에서 $35mg/m^{3}$까지 다양하였다. 호흡성분진의 농도는 석탄을 접하는 탄갱에서 암석을 접하는 탄갱보다 높았는데 이는 분진의 원인이 석탄 때문이었다.

• 천문학회보
• /
• 제40권2호
• /
• pp.54.1-54.1
• /
• 2015

We observed 38 Planck Cold Clumps (PCCs) in the $850{\mu}m$ dust continuum emission using the JCMT/SCUBA-2, and detected the emission in 15 clumps containing dense cores. In this poster we present the preliminary results. The PCCs are cold, dense, and thus, they are considered as objects in the early evolutionary stages of star formation. The sources in our sample were selected based on the Purple Mountain Observatory (PMO) 13CO (1-0) integrated intensity maps. In order to examine whether these cores detected in $850{\mu}m$ continuum have potential to be prestellar cores, we compare each core mass estimated from the $850{\mu}m$ continuum with the Virial mass and Bonnor-Ebert (BE) mass calculated from the 13CO (1-0) or C18O (1-0) spectra. By comparing the two column densities from the dust continuum and the 13CO (1-0) or C18O (1-0) line, we also derive the CO depletion factor, which could be an indicator of core evolution. The moment maps of the 13CO (1-0) line are used to study the physical properties (e.g. kinematics, turbulence) of PCCs. We investigate difference between the sources with and without detectable $850{\mu}m$ emission to study the formation conditions of dense cores.

• 농업과학연구
• /
• 제23권1호
• /
• pp.51-60
• /
• 1996

This study was performed to evaluate the effects of filler on engineering properties of permeable polymer concrete with unsaturated polyester resin. The following conclusions were drawn; 1. The unit weight was in the range of $1.804{\sim}1.919t/m^3$, the weights of those concrete were decreased 17~22% than that of the normal cement concrete. 2. The highest strength was achieved by stone dust filled permeable polymer concrete, it was increased 17% by compressive, 147% by tensile and 188% by bending strength than that of the normal cement concrete, respectively. 3. The ultrasonic pulse velocity was in the range of 2,722~3,060m/sec, which was showed about the same compared to that of the normal cement concrete. Stone dust filled permeable polymer concrete was showed higher pulse velocity. 4. The water permeability was in the range of $3.076{\sim}4.152{\ell}/cm^2/h$, and it was larglely dependent upon the mix design. These concrete can be used to the structures which need water permeability. 5. The compressive strength, tensile strength, bending strength and ultrasonic pulse velocity were largely showed with the increase of unit weight. But, it was decreased with the increase of water permeability, respectively.

• 환경위생공학
• /
• 제23권3호
• /
• pp.1-8
• /
• 2008

Currently, medical waste stoker incinerator is widely used in the emission control technology of health-care risk waste and miscellaneous contaminated waste. In the past, wet type control technology was used to remove the major harmful gaseous contaminants of medical waste such as HCl, $NO_x,\;SO_2$, CO, DUST, Dioxin. However, the treatment cost for wastewater was high and it has a disadvantage for frozen system during winter season. Therefore, in order to obtain effective treatment, the dry type control technology was developed and widely used to remove the gaseous contaminants. In this study, pre-coated bag filter using hydrated lime, ($Ca(OH)_2$), was applied to the dry type control system and the optimum dose of hydrated lime was investigated. The treatment results showed that the dust collection rate was approximately 26.7%. Moreover, the HCl removal rate using pre-coated bag filter ($50mg/sm^3\;Ca(OH)_2$) was 13.52%, which was significantly higher than 3.26% obtained from conventional bag filter.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.71-79
• /
• 2020

Background: Protection from yellow dust and particulate matter is ensured by the use of respirators among the Korean citizens and workers. However, the manikins used to test the performance of the same were manufactured considering western facial specifications owing to which they do not represent Korean facial characteristics. Methods: Analysis of the data from the 6th 3D anthropometric survey of Koreans (Size Korea; 2010-2013) of 4,583 people aged 7 to 69 years was performed to obtain their facial dimensions. We subsequently clustered 44 facial measurements using Design X software, followed by the creation of the cluster centroid. Results: Three 3D head forms were developed-small, medium, and large, and their images were stored in ".stl" format for 3D printing. The facial widths and lengths of the three head forms were 127.1 mm × 90.6 mm, 143.2 mm × 104.0 mm, and 149.1 mm × 120.2 mm, respectively. Conclusion: We developed manikin head forms according to the facial dimensions of the Korean population, which was essential in evaluating respiratory protective equipment. These head forms can be used to test the performance of respirators considering the facial dimensions of the Korean population.

• 천문학회보
• /
• 제41권1호
• /
• pp.67.1-67.1
• /
• 2016

We observed two star forming regions, N159 and N160, in the Large Magellanic Cloud with SIRPOL, the polarimeter of the Infrared Survey Facility (IRSF) in South Africa. The photometric and polarimetric observations are done in three near-infrared bands, J, H, and Ks. We measured Stokes parameters of point sources and calculated their degrees of polarization and polarization angles. The polarization vector map shows complex features associated with dust and gas structures. Overall features of the magnetic field in N159 and N160 regions are different from each other and appear to be related to local environments, such as interior and boundary of shell structure, existence of star-forming HII regions, and boundaries between HII regions and dense dark clouds. We discuss the relation between the structure of magnetic field and the local properties of dust and gas in N159 and N160 regions by comparing our polarization vector map with images of $H{\alpha}$, mid-infrared, and $^{12}CO$ emissions, respectively by WFI of MPG/ESO telescope, Spitzer IRAC, and NANTEN.