• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.172-179
• /
• 2012

This paper presents the design and analysis of a vibration-driven electromagnetic energy harvester that uses a multi-pole magnet. The physical backgrounds of the vibration electromagnetic energy harvester are reported, and an ANSYS finite element analysis simulation has been used to determine the different alignments of the magnetic pole array with their flux lines and density. The basic working principles for a single and multi-pole magnet are illustrated and the proposed harvester has been presented in a schematic diagram. Mechanical parameters such as input frequency, maximum displacement, number of coil turns, and load resistance have been analyzed to obtain an optimized output power for the harvester through theoretical study. The paper reports a maximum of 1.005 mW of power with a load resistance of $1.9k{\Omega}$ for 5 magnets with 450 coil turns.

• KIEAE Journal
• /
• v.4 no.2
• /
• pp.19-27
• /
• 2004

The importance of Building Remodeling as a means to create an architectural environment capable of responding to the social, economic changes has increased more than ever. And it has become necessary to consider Environmental performance in Building remodeling. Consideration of converting buildings into Environment-Friendly Remodeling of Office Buildings makes more and more increased in our construction compatibility. This Study is intended to increase the designer' recognition of Environmental Performance Improvement in the feasibility analysis and schematic design of Office Building Remodeling and to provide Planning Data and Guidance. In this context, this study is focused on the "planning Guidance for Environmental Friendly Remodeling". Through this study, the flow of Environmental Design and Construction is elevated reaching the level in developed country.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1015-1024
• /
• 1990

This paper proposes a program counter unit(PCU) on the pipelined architecture of RISC (Reduced Instruction Set Computer) type high performance processors, PCU is used for supplying instruction addresses to memory units(Instruction Cache) efficiently. A RISC processor's PCU has to compute the instruction address within required intervals continnously. So, using the method of self-generated incrementor, is more efficient than the conventional one's using ALU or private adder. The proposed PCU is designed to have the fast +4(Byte Address) operation incrementor that has no carry propagation delay. Design specifications are taken by analyzing the whole data path operation of target processor's default and exceptional mode instructions. CMOS and wired logic circuit technologic are used in PCU for the fast operation which has small layout area and power dissipation. The schematic capture and logic, timing simulation of proposed PCU are performed on Apollo W/S using Mentor Graphics CAD tooks.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.6
• /
• pp.49-57
• /
• 1993

In the paper, we describe the design of a pipelined datapath synthesis system for DSP applications. Taking SFG (Signal Flow Graph) in schematic as inputs, the system generates pipelined datapaths automatically through scheduling and module allocation processes. For efficient hardware synthesis, scheduling and module allocation algorithms are proposed. The proposed scheduling algorithm is of iterative/constructive nature, where the measure of equi-distribution of operations to partitions is adopted as the objective function. Module allocation is performed to reduce the interconnection cost from the initial allocation. In the experiment, we compare the results with those of other systems and show the effectiveness of the proposed algorithms.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.21-28
• /
• 1994

It is very important and necessary to predict luminous enviroment in an interior space. This paper has described about energy saving and evaluated interior visual environment in a office building having on/off turning control lighting system utilizing daylight. In order to predict the interior varior illumination distribution, the scale model was made and examined under various conditions, such ad difference of window glass, and color pattern of wall, floor, and also ceiling lighting system type. This paper suggests that basic fundamental data of lighting design performance in the concept and schematic stages of design.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.80-88
• /
• 2002

Comprehensive landscape architectural services provided from schematic design through construction document for this 22,000 square foot, linear, urban rooftop garden situated on top of an in-ground parking garage. The Butterfly Garden serves as a green buffer between a fully renovated historic, seven story condominium building and 15 newly constructed luxury town houses. The park was developed with the cooperation and input from the Washington Butterfly Society during an intensive design charette. The garden will one day soon serve as an ecological amenity to the residents of Alban Towers as well as the surrounding community.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.12-15
• /
• 2011

The most widely used kerosene-LOx liquid-propellant rocket engines in these days have a similar engine schematic to those of the past because of the development cost and the reliability. The efficiency of engines could be increased by the factors such as a cooling method, engine cycles, shape of cooling channels, additional coolant and so on. In this article, it is described that some design ideas for performance enhancement by exchange kerosene with LOx of a coolant.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.109-117
• /
• 2010

With the IMF crisis in the late 1990's, coupled with the excessive supply of housing stock from the past, construction companies are adopting various differentiating strategies to address the decreasing apartment sales rates. Most of those strategies tend to follow the recent trend of 'eco-friendliness,' creating images of the apartments as 'well-being housing types.' In doing so, green spaces and water features are actively being used in outdoor landscapes design. One specific trend that can be witnessed is the efforts to make reference to the traditional Korean design languages, known as the 'Korean Style.' However, the applications of the 'Korea Style' on landscape design are being explored only by the construction companies, while most researches on the 'Korean Style' focus on its application on the indoor housing units. In this context, this series of case studies of the application of 'Korea Style' on landscape design attempts to extract design elements that can be set as basic guidelines.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.6
• /
• pp.75-82
• /
• 2007

In this study, a design-supporting system, which is intended to assist engineers in the schematic phase of the structural design, is developed using a case database that contains design information of tall buildings in Korea. A case-based reasoning method utilizing the case database is proposed. The inductive retrieval module for selecting structural system, in the initial stage, from the design information of case database for 47 tall buildings is presented. Also, the nearest-neighbor retrieval method for selecting similar design cases is introduced.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.201-210
• /
• 2006

Among the architects who use diagrams as a digital design process, especially through Peter Eisenman and Ben van Berkel's works, we have specifically got the meaning of their diagrams. Their diagrams act as 'the block of becoming' and we can regard the diagrams not only as a tool of devenir including architect's root thoughts beyond a tool of schematic presentation, but also as architect's intention including devenir thought. And in the case of diagrams which the architects use, we can recognize that architects' intentions are to think that Deleuze's 'machine abstraite' evolve the diagram into various and transformed form. That is to say, Peter Eisenman interprets the machine abstraite as a root thought of devenir by using diagram as medium to reveal the virtual. And Ben van Berkel transforms the diagram by including all external conditions into selected diagram which shows the abstract relations to the elements. We can get the meaning of the machine abstraite from these cases well. This study will play an important role in giving good usage of the diagram in making a form of contemporary digital architecture and showing the direction of form creation field.