• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.1-9
• /
• 2014

로터에 작용하는 불균형한 반복 하중은 풍력발전기에 구조적 하중을 발생시키고 이러한 하중이 구조물에 지속적으로 누적되면 피로 파괴와 수명 단축을 발생시킨다. Individual pitch control(IPC)는 이러한 구조적 하중을 저감시키고 풍력발전기의 작동 수명 연장에 효과가 있는 제어 방법이다. 본 연구에서는 Decentralized LQR(DLQR)과 Disturbance accommodating control(DAC)를 이용한 IPC 설계를 제시한다. DLQR은 로터 회전속도 제어를 위해 사용하였고 DAC는 블레이드에 외란으로 작용하는 바람(난류) 효과를 상쇄하도록 구성하였다. 제시된 IPC제어기의 구조적 하중 저감 효과는 Gain-scheduled PI로 설계된 Collective pitch control(CPC)과 비교하여 확인하였다. 또한, IPC의 구조물 하중 저감 효과를 확인하기 위해 피로 누적에 의한 손상정도를 나타내는 피로등가하중(DEL)을 이용하였다.

• Asian Journal for Public Opinion Research
• /
• 제9권4호
• /
• pp.331-351
• /
• 2021

The unprecedented situation of COVID-19 caused the government of India to instruct educational institutions to switch to an online mode to mitigate the losses for students due to the pandemic. The present study attempts to explore the impact of online learning introduced as a stop-gap arrangement during the pandemic in India. A survey was conducted (N=289), via Facebook and WhatsApp, June 1-15, 2020 to understand the accessibility and effectiveness of online learning and constraints that students of higher education across the country faced during the peak times of the pandemic. The analysis and interpretation of the data revealed that the students acclimatized in a short span of time to online learning, with only 33.21% saying they were not satisfied with the online learning mode. However, the sudden shift to online education has presented more challenges for the socially and economically marginalized groups, including Scheduled Caste (SC), Scheduled Tribes (ST), Other Backward Class (OBC), females, and students in rural areas, due to factors like the price of high-speed Internet (78.20% identified it as a barrier to online learning), insufficient infrastructure (23.52% needed to share their device frequently or very frequently), poor Internet connectivity, etc. According to 76.47% of respondents, the future of learning will be in "blended mode." A total of 88.92% of the respondents suggested that the government should provide high-quality video conferencing facilities free to students to mitigate the division created by online education in an already divided society.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권5호
• /
• pp.218-225
• /
• 2001

This paper analyses the performance of network system using the CAN(Controller Area Network) protocol. Given messages are assumed to be scheduled by the DMS(Deadline Monotonic Scheduling) algorithm. The mathematical models for time-delay that can be occurred between CAN nodes are defined. The effectiveness of modeling is shown by comparing the difference of time-delay between simulations and practical experiments. We analyse the results according to the variation of factors, such as the number of nodes, the transmission speed, the message size and the number of aperiodic messages through simulation and confirm the real-time performance of lower priority messages. We also investigate the real-time performance of periodic messages when aperiodic message generates.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.465-474
• /
• 2002

Korean government has adopted the French TGV as a high-speed transportation system and the first service is scheduled at the end of 2003. TGV-relevant documents are consisted of huge volumes, of which over than 76% has been translated in English. A large part of the English version is, however, incomprehensible without referring to the original French version. The goal of this paper is to demonstrate how DiET 2.5, a lexicon builder, makes it possible to build with ease domain-specific terminology lexicon that may contain multimedia and multilingual data with multi-layered logical information. We believe our wok shows an important step in enlarging the language scope and the development of electronic lexica, and in providing the flexibility of defining any type of the DTD and the interconnectivity among collaborators. As an application of DiET 2.5, we would like to build a TGV-relevant lexicon in the near future.

• 대한전자공학회논문지TE
• /
• 제39권4호
• /
• pp.350-354
• /
• 2002

본 논문에서는 무인비행체를 특정 위치로 유도하기 위한 자동조종장치를 설계하였으며, 설계되어진 자동 조종장치에 대해 외부 교란에 대한 강건성을 시험하였다. 무인비행체의 속도를 저속, 순항, 고속으로 분류하여 각각의 속도에 대한 자동조종장치를 설계하였으며, 설계되어진 자동조종장치의 이득에 대해 이득 스케듈링을 수행하였다. 무인비행체의 운용고도에 따라 대기교란 모델을 발생하였고, 모의실험을 통해 이에 따른 무인비행체 자동조종장치의 강건성을 증명하였다.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.766-771
• /
• 2006

Railway stations are important facilities for transport of passengers and freights. The location of station have an effect on the efficiency of railway transport and operation. In this study, an inspection of the primary factors for station spacing in urban railway has been performed and a review for the propriety of the present states and further improvement has been carried. It may be helpful for proper decisions on the route planning in urban railway. Primary factors for station spacing are 1)train capacity, 2)competitiveness with other transportation, 3)accessibility and 4)construction cost, which is out of consideration in the inspection. From the result of this study, the proper station spacing is about 600m for the accessibility, more over 1.03km for the train capacity and more over 1.4km for the competitiveness with other transportation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.95-100
• /
• 1996

This paper presents the experimental study on hardening process of high-strength and high-flowable concrete. The experiments were performed to investigate any unfavorable construction situations since the actual concrete placement has been scheduled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out. The tests were conducted using 600nm and 1000nm height of steel tube to simulate the practical concrete filled steel tube columns according to the following variables as: the categories of chemical admixtures, curing temperatures and curing schemes. The test results were analyzed in terms of hardening speed, internal heat of hydration and history of strength gain. This paper emphasizes the importance of curing schemes on durability and the use of hardening accelerators on strength gain.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.995-1000
• /
• 2016

Minimum Energy Performance Standard(MEPS) has been adapted in Korea since 2008. For at least 37 kW, IE3 efficiency class motors are now mandatory in Korea. IE4 level regulation is expected in a few years. Foreign companies are already selling IE4 class motors in the market, and the discussions on IE5 have already started. The efficiency standard of variable speed motors is scheduled for publication shortly. Recently, discussions are now beginning to prepare for IE5 in Korea. In this paper, author reviews the policies associated with a high efficent electric motors by reference to both domestic and international standards, and reviews the research direction to prepare for IE5.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.406-406
• /
• 2000

In this study, as a part developing an unmanned container terminal (UCT), Ive designed and implemented an Autonomous Ground Vehicle (AGV) that can deliver containers in the port fast and safely as they are scheduled. It is preferable to research the intelligent UCT/AGV for delivering containers all day long without causing any trouble. For the sake of safe and fast AGV driving, we implemented a multiple-sensor system with vision, ultrasonic, and IR sensors and we adapted the hight-speed wireless LAN that satisfies the IEEE 802.11 Standard for hi-directional communication between the main processor in AGV and a host computer. The Pentium-III processor board mounted on the bottom frame in AGV combines and computes the information from sensors and controls the AGV driving. There are also the 80C196KC micro-controllers to control the actuating and steering motors. In addition, a steering function that is defined newly in this paper is heavily concerned in the mechanical design, and it plays an important role when AGV moves along a curve. Experimental results show the fast and safe delivery operations are possible with this UCT/AGV

• Journal of Communications and Networks
• /
• 제11권5호
• /
• pp.464-472
• /
• 2009

In this paper, we propose a packet scheduling algorithm for cellular relay networks by considering relay selection, variation of channel quality, and packet delay. In the networks, mobile users are equipped with not only cellular but also user relaying radio interfaces, where base station exploits adaptive high speed downlink channel. Our proposed algorithm selects a user with good cellular channel condition as a relay station for other users with bad cellular channel condition but can get access to relay link with good quality. This can achieve flexible packet scheduling by adjusting transmission rates of cellular link. Packets are scheduled for transmission depending on scheduling indexes which are calculated based on user's achieved transmission rate, packet utility, and proportional fairness of their throughput. The performance results obtained by using computer simulation show that the proposed scheduling algorithm is able to achieve high network capacity, low packet loss, and good fairness in terms of received throughput of mobile users.